This driver hasn't seen any recent bug fixing and is one of the last
drivers using the scsi_module.c infrastruture that has been deprecated
15 years ago.

Signed-off-by: Christoph Hellwig <h...@lst.de>
---
 drivers/scsi/Kconfig   |   8 ---
 drivers/scsi/Makefile  |   1 -
 drivers/scsi/mvme147.c | 151 -------------------------------------------------
 drivers/scsi/mvme147.h |  25 --------
 drivers/scsi/wd33c93.c |   5 --
 5 files changed, 190 deletions(-)
 delete mode 100644 drivers/scsi/mvme147.c
 delete mode 100644 drivers/scsi/mvme147.h

diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index 11e89e56b865..a95084008fe0 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -1390,14 +1390,6 @@ config SCSI_MAC_ESP
          To compile this driver as a module, choose M here: the module
          will be called mac_esp.
 
-config MVME147_SCSI
-       bool "WD33C93 SCSI driver for MVME147"
-       depends on MVME147 && SCSI=y
-       select SCSI_SPI_ATTRS
-       help
-         Support for the on-board SCSI controller on the Motorola MVME147
-         single-board computer.
-
 config MVME16x_SCSI
        tristate "NCR53C710 SCSI driver for MVME16x"
        depends on MVME16x && SCSI
diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile
index d5135efbf9cd..9575f291acda 100644
--- a/drivers/scsi/Makefile
+++ b/drivers/scsi/Makefile
@@ -51,7 +51,6 @@ obj-$(CONFIG_SCSI_ZORRO7XX)   += 53c700.o     zorro7xx.o
 obj-$(CONFIG_A3000_SCSI)       += a3000.o      wd33c93.o
 obj-$(CONFIG_A2091_SCSI)       += a2091.o      wd33c93.o
 obj-$(CONFIG_GVP11_SCSI)       += gvp11.o      wd33c93.o
-obj-$(CONFIG_MVME147_SCSI)     += mvme147.o    wd33c93.o
 obj-$(CONFIG_SGIWD93_SCSI)     += sgiwd93.o    wd33c93.o
 obj-$(CONFIG_ATARI_SCSI)       += atari_scsi.o
 obj-$(CONFIG_MAC_SCSI)         += mac_scsi.o
diff --git a/drivers/scsi/mvme147.c b/drivers/scsi/mvme147.c
deleted file mode 100644
index e6b2b681fda3..000000000000
--- a/drivers/scsi/mvme147.c
+++ /dev/null
@@ -1,151 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/types.h>
-#include <linux/mm.h>
-#include <linux/blkdev.h>
-#include <linux/interrupt.h>
-
-#include <asm/page.h>
-#include <asm/pgtable.h>
-#include <asm/mvme147hw.h>
-#include <asm/irq.h>
-
-#include "scsi.h"
-#include <scsi/scsi_host.h>
-#include "wd33c93.h"
-#include "mvme147.h"
-
-#include <linux/stat.h>
-
-
-static irqreturn_t mvme147_intr(int irq, void *data)
-{
-       struct Scsi_Host *instance = data;
-
-       if (irq == MVME147_IRQ_SCSI_PORT)
-               wd33c93_intr(instance);
-       else
-               m147_pcc->dma_intr = 0x89;      /* Ack and enable ints */
-       return IRQ_HANDLED;
-}
-
-static int dma_setup(struct scsi_cmnd *cmd, int dir_in)
-{
-       struct Scsi_Host *instance = cmd->device->host;
-       struct WD33C93_hostdata *hdata = shost_priv(instance);
-       unsigned char flags = 0x01;
-       unsigned long addr = virt_to_bus(cmd->SCp.ptr);
-
-       /* setup dma direction */
-       if (!dir_in)
-               flags |= 0x04;
-
-       /* remember direction */
-       hdata->dma_dir = dir_in;
-
-       if (dir_in) {
-               /* invalidate any cache */
-               cache_clear(addr, cmd->SCp.this_residual);
-       } else {
-               /* push any dirty cache */
-               cache_push(addr, cmd->SCp.this_residual);
-       }
-
-       /* start DMA */
-       m147_pcc->dma_bcr = cmd->SCp.this_residual | (1 << 24);
-       m147_pcc->dma_dadr = addr;
-       m147_pcc->dma_cntrl = flags;
-
-       /* return success */
-       return 0;
-}
-
-static void dma_stop(struct Scsi_Host *instance, struct scsi_cmnd *SCpnt,
-                    int status)
-{
-       m147_pcc->dma_cntrl = 0;
-}
-
-int mvme147_detect(struct scsi_host_template *tpnt)
-{
-       static unsigned char called = 0;
-       struct Scsi_Host *instance;
-       wd33c93_regs regs;
-       struct WD33C93_hostdata *hdata;
-
-       if (!MACH_IS_MVME147 || called)
-               return 0;
-       called++;
-
-       tpnt->proc_name = "MVME147";
-       tpnt->show_info = wd33c93_show_info,
-       tpnt->write_info = wd33c93_write_info,
-
-       instance = scsi_register(tpnt, sizeof(struct WD33C93_hostdata));
-       if (!instance)
-               goto err_out;
-
-       instance->base = 0xfffe4000;
-       instance->irq = MVME147_IRQ_SCSI_PORT;
-       regs.SASR = (volatile unsigned char *)0xfffe4000;
-       regs.SCMD = (volatile unsigned char *)0xfffe4001;
-       hdata = shost_priv(instance);
-       hdata->no_sync = 0xff;
-       hdata->fast = 0;
-       hdata->dma_mode = CTRL_DMA;
-       wd33c93_init(instance, regs, dma_setup, dma_stop, WD33C93_FS_8_10);
-
-       if (request_irq(MVME147_IRQ_SCSI_PORT, mvme147_intr, 0,
-                       "MVME147 SCSI PORT", instance))
-               goto err_unregister;
-       if (request_irq(MVME147_IRQ_SCSI_DMA, mvme147_intr, 0,
-                       "MVME147 SCSI DMA", instance))
-               goto err_free_irq;
-#if 0  /* Disabled; causes problems booting */
-       m147_pcc->scsi_interrupt = 0x10;        /* Assert SCSI bus reset */
-       udelay(100);
-       m147_pcc->scsi_interrupt = 0x00;        /* Negate SCSI bus reset */
-       udelay(2000);
-       m147_pcc->scsi_interrupt = 0x40;        /* Clear bus reset interrupt */
-#endif
-       m147_pcc->scsi_interrupt = 0x09;        /* Enable interrupt */
-
-       m147_pcc->dma_cntrl = 0x00;     /* ensure DMA is stopped */
-       m147_pcc->dma_intr = 0x89;      /* Ack and enable ints */
-
-       return 1;
-
-err_free_irq:
-       free_irq(MVME147_IRQ_SCSI_PORT, mvme147_intr);
-err_unregister:
-       scsi_unregister(instance);
-err_out:
-       return 0;
-}
-
-static struct scsi_host_template driver_template = {
-       .proc_name              = "MVME147",
-       .name                   = "MVME147 built-in SCSI",
-       .detect                 = mvme147_detect,
-       .release                = mvme147_release,
-       .queuecommand           = wd33c93_queuecommand,
-       .eh_abort_handler       = wd33c93_abort,
-       .eh_host_reset_handler  = wd33c93_host_reset,
-       .can_queue              = CAN_QUEUE,
-       .this_id                = 7,
-       .sg_tablesize           = SG_ALL,
-       .cmd_per_lun            = CMD_PER_LUN,
-       .use_clustering         = ENABLE_CLUSTERING
-};
-
-
-#include "scsi_module.c"
-
-int mvme147_release(struct Scsi_Host *instance)
-{
-#ifdef MODULE
-       /* XXX Make sure DMA is stopped! */
-       free_irq(MVME147_IRQ_SCSI_PORT, mvme147_intr);
-       free_irq(MVME147_IRQ_SCSI_DMA, mvme147_intr);
-#endif
-       return 1;
-}
diff --git a/drivers/scsi/mvme147.h b/drivers/scsi/mvme147.h
deleted file mode 100644
index f75ff58ddcd0..000000000000
--- a/drivers/scsi/mvme147.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef MVME147_H
-
-/* $Id: mvme147.h,v 1.4 1997/01/19 23:07:10 davem Exp $
- *
- * Header file for the MVME147 built-in SCSI controller for Linux
- *
- * Written and (C) 1993, Hamish Macdonald, see mvme147.c for more info
- *
- */
-
-#include <linux/types.h>
-
-int mvme147_detect(struct scsi_host_template *);
-int mvme147_release(struct Scsi_Host *);
-
-#ifndef CMD_PER_LUN
-#define CMD_PER_LUN            2
-#endif
-
-#ifndef CAN_QUEUE
-#define CAN_QUEUE              16
-#endif
-
-#endif /* MVME147_H */
diff --git a/drivers/scsi/wd33c93.c b/drivers/scsi/wd33c93.c
index 74be04f2357c..00a53cf138d1 100644
--- a/drivers/scsi/wd33c93.c
+++ b/drivers/scsi/wd33c93.c
@@ -1540,11 +1540,6 @@ reset_wd33c93(struct Scsi_Host *instance)
                                     DEFAULT_SX_OFF, 0, hostdata->sx_table));
        write_wd33c93(regs, WD_COMMAND, WD_CMD_RESET);
 
-
-#ifdef CONFIG_MVME147_SCSI
-       udelay(25);             /* The old wd33c93 on MVME147 needs this, at 
least */
-#endif
-
        while (!(read_aux_stat(regs) & ASR_INT))
                ;
        sr = read_wd33c93(regs, WD_SCSI_STATUS);
-- 
2.14.2

Reply via email to