https://bugzilla.kernel.org/show_bug.cgi?id=199703
--- Comment #12 from Roberto M. (roby_program...@fastwebnet.it) --- Hi Don, Thank you for your answer 1) for your comment #9 you saw my last lspci output with a working kernel, I mean the original one from kernel.org 4.13.16, it boot, there is still cciss drive inside, it was removed in 4.14 kernel and above, so no lspci output from kernel > 4.13.16 because it crash at boot, I can only made a video please habe a look : https://kernelnewbies.org/Linux_4.14 https://www.systutorials.com/docs/linux/man/4-hpsa/ 2) for comment #10 and #11 I tested hpsa_allow_any, if I use it, it doesn't boot also with a working kernel, for me it means that my HP P400 card work only with cciss driver. I read P400 card use cciss (and maybe cciss use hpsa) instead e200i use hpsa, so is why I have both drivers loaded with kernel 4.13.16, but I am not sure at 100% 3) check https://access.redhat.com/solutions/874443 4) maybe is my problem I misunderstood that cciss driver was removed because it is/will been replaced by hpsa driver, it will take care also of old board working only cciss, but it not seems so, I don't get why at booting it crash so without any possibility to do anything I have to remove power https://github.com/torvalds/linux/blob/master/drivers/scsi/hpsa.c https://patchwork.kernel.org/patch/9947333/ sorry for my bad English, I think hpsa didn't be tested on older card, I am available for test some patch and so on... bye -- You are receiving this mail because: You are the assignee for the bug.
