Since f44ac12f1dcc, BG enablement is tracked with the
LPFC_SLI3_BG_ENABLED bit, which is set in lpfc_get_cfgparam
before lpfc_sli_config_sli_port() is called. The bit
shouldn't be cleared before checking the feature.
Based on problem analysis by David Bond.
Fixes: f44ac12f1dcc "scsi: lpfc: Memory allocation error during driver start-up
on power8"
Tested-by: David Bond <db...@suse.com>
Signed-off-by: Martin Wilck <mwi...@suse.com>
Cc: sta...@vger.kernel.org # 4.17.x
Cc: sta...@vger.kernel.org # 4.18.x
Cc: sta...@vger.kernel.org # 4.19.x
---
drivers/scsi/lpfc/lpfc_init.c | 6 +++++-
drivers/scsi/lpfc/lpfc_sli.c | 1 -
2 files changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index 323a32e..6b61cae 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -167,7 +167,11 @@ lpfc_config_port_prep(struct lpfc_hba *phba)
sizeof(phba->wwpn));
}
- phba->sli3_options = 0x0;
+ /*
+ * Clear all option bits except LPFC_SLI3_BG_ENABLED,
+ * which was already set in lpfc_get_cfgparam()
+ */
+ phba->sli3_options &= (uint32_t)LPFC_SLI3_BG_ENABLED;
/* Setup and issue mailbox READ REV command */
lpfc_read_rev(phba, pmb);
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index 783a154..b9e5cd7 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -4965,7 +4965,6 @@ lpfc_sli_config_port(struct lpfc_hba *phba, int sli_mode)
phba->sli3_options &= ~(LPFC_SLI3_NPIV_ENABLED |
LPFC_SLI3_HBQ_ENABLED |
LPFC_SLI3_CRP_ENABLED |
- LPFC_SLI3_BG_ENABLED |
LPFC_SLI3_DSS_ENABLED);
if (rc != MBX_SUCCESS) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
--
2.19.1
