On 2/11/2019 7:05 AM, Ewan D. Milne wrote:
The change to use dma_set_mask_and_coherent() incorrectly made a second
call with the 32 bit DMA mask value when the call with the 64 bit DMA
mask value succeeded. This resulted in NVMe/FC connections failing due
to corrupted data buffers, and various other SCSI/FCP I/O errors.
Fixes: f30e1bfd6154 ("scsi: lpfc: use dma_set_mask_and_coherent")
Cc: <[email protected]>
Suggested-by: Don Dutile <[email protected]>
Signed-off-by: Ewan D. Milne <[email protected]>
---
drivers/scsi/lpfc/lpfc_init.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index bede11e..60c178d 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -7367,9 +7367,9 @@ struct lpfc_rpi_hdr *
return error;
/* Set the device DMA mask size */
- if (dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64)) ||
- dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32)))
- return error;
+ if (dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64)) != 0)
+ if (dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32)) !=
0)
+ return error;
/* Get the bus address of Bar0 and Bar2 and the number of bytes
* required by each mapping.
@@ -9745,9 +9745,9 @@ struct lpfc_cq_event *
return error;
/* Set the device DMA mask size */
- if (dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64)) ||
- dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32)))
- return error;
+ if (dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64)) != 0)
+ if (dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32)) !=
0)
+ return error;
/*
* The BARs and register set definitions and offset locations are
Thanks Ewan.
Signed-off-by: James Smart <[email protected]>
-- james
