A recent patch unconditionally marks the hba as in error as part
of resetting the adapter. The driver flow that called the adapter
reset was a recovery path, which expects the adapter to not be in
an error state in order to finish the recovery. Given the new error
state being set, the recovery fails and the adapter is left in limbo.
Revise the adapter reset routine so that it will only mark the
adapter in error if it was unable to reset the adapter.
Fixes: 8c24a4f643ed ("scsi: lpfc: Fix crash due to port reset racing vs adapter
error handling")
Signed-off-by: Dick Kennedy <[email protected]>
Signed-off-by: James Smart <[email protected]>
---
Indicated commit that is fixed is only in 5.4/scsi-queue
---
drivers/scsi/lpfc/lpfc_sli.c | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index bb5705267c39..75bb75800642 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -4619,8 +4619,10 @@ lpfc_sli_brdrestart_s4(struct lpfc_hba *phba)
hba_aer_enabled = phba->hba_flag & HBA_AER_ENABLED;
rc = lpfc_sli4_brdreset(phba);
- if (rc)
- goto error;
+ if (rc) {
+ phba->link_state = LPFC_HBA_ERROR;
+ goto hba_down_queue;
+ }
spin_lock_irq(&phba->hbalock);
phba->pport->stopped = 0;
@@ -4635,8 +4637,7 @@ lpfc_sli_brdrestart_s4(struct lpfc_hba *phba)
if (hba_aer_enabled)
pci_disable_pcie_error_reporting(phba->pcidev);
-error:
- phba->link_state = LPFC_HBA_ERROR;
+hba_down_queue:
lpfc_hba_down_post(phba);
lpfc_sli4_queue_destroy(phba);
--
2.13.7
