On Tue, Mar 02, 1999 at 12:16:25PM +0100, Rob van Nieuwkerk wrote:
> I've recently switched to 2.2.2-ac[35] kernels and since then I get
> kernel messages like the ones appended below. My SCSI hardware setup
> has always worked flawlessly in the past (2.0.x and before). I'm just
> wondering what's happening. First I thought it was because the Tagged
> Command queueing I had never enabled before. But I disabled it and the
> the messages still appear.
>
> My question is: can it be that these problems are triggered easier by the
> newer NCR driver or should I suspect that my hardware is going bad ?
You might try the 53c7,8xx driver instead, since the 810 is said to be
obsolete. You might also want to try some newer 8xx like the 53c860/875
as found on Tekram DC-310/DC-390U/DC-390F or concurrent Symbios Logic
adaptors instead of your old 810. The ncr53c8xx driver has always been
fine for me, throughout all 2.0.35+ and ca. 2.1.100+ as well as every
2.2.x. Using Tekram DC-390U (SYM53C875).
--
Matthias Andree
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to [EMAIL PROTECTED]
