I think it was the AF-model... long time ago. I know that the U2W is
totally different to the standard UW, and I also know that it was the
DMA speed at the 1542, but I suggested, it could be a similar problem on
the U2W between the controller and disk like the "dma-controller"
problem of the 1542.
Until now there is no general solution for this problem, that also
belongs to my system and to some other guys systems, too. So suggestion
are one way to solve (not the only way, I know).
Greetings, Dietmar
Andrew B. Cramer wrote:
>
> Dietmar,
> The AHA1542, which model, A,B, CF,CP? The speed you may
> be setting is the DMA speed from the controler to the system.
>
> The U2W driver is (not) the same as the standard 2940UW.
>
> Best - Andy
>
>
>
>***************************************************************************************
> Andrew B. Cramer
> <[EMAIL PROTECTED]> <http://www.cramer-ts.com>
> The Linux Resource Exchange <http://www.linuxrx.com>
> Member - HTML Writers Guild - Netware Users International
--
"Don't fear the Gates" (a little like Blue Oyster Cult)
Dietmar Stein, Systemadministrator UNIX/Linux
[EMAIL PROTECTED], [EMAIL PROTECTED]
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to [EMAIL PROTECTED]
