Hello,
Still having troubles with quantums...
These are three vikings in a raid0 stripe.
Model: VIKING II 4.5WLS Revision: 5520
Write caching was turned off.
Below is an extract from the errors in the logs.
TIA
Michele Comitini
(scsi0:-1:-1:-1) CMDCMPLT with invalid SCB index 144
scsi : aborting command due to timeout : pid 125057, scsi0, channel 0, id 9, lun 0
Read (10) 00 00 49 d6 20 00 00 30 00
(scsi0:0:10:0) Invalid SCB during SEQINT 0x71, SCB_TAG 160.
(scsi0:-1:-1:-1) CMDCMPLT with invalid SCB index 160
scsi : aborting command due to timeout : pid 125624, scsi0, channel 0, id 10, lun 0
Read (10) 00 00 51 6b 70 00 00 30 00
(scsi0:0:9:0) Invalid SCB during SEQINT 0x71, SCB_TAG 144.
(scsi0:-1:-1:-1) CMDCMPLT with invalid SCB index 144
scsi : aborting command due to timeout : pid 127203, scsi0, channel 0, id 9, lun 0
Read (10) 00 00 70 d6 20 00 00 30 00
(scsi0:0:9:0) Invalid SCB during SEQINT 0x71, SCB_TAG 144.
(scsi0:-1:-1:-1) CMDCMPLT with invalid SCB index 144
(scsi0:0:10:0) Invalid SCB during SEQINT 0x71, SCB_TAG 160.
(scsi0:-1:-1:-1) CMDCMPLT with invalid SCB index 160
scsi : aborting command due to timeout : pid 127530, scsi0, channel 0, id 9, lun 0
Read (10) 00 00 75 16 60 00 00 20 00
scsi : aborting command due to timeout : pid 127616, scsi0, channel 0, id 10, lun 0
Read (10) 00 00 76 2b 70 00 00 30 00
(scsi0:0:10:0) Invalid SCB during SEQINT 0x71, SCB_TAG 160.
(scsi0:-1:-1:-1) CMDCMPLT with invalid SCB index 160
scsi : aborting command due to timeout : pid 128049, scsi0, channel 0, id 10, lun 0
Read (10) 00 00 7b 81 70 00 00 30 00
(scsi0) <Adaptec AHA-294X Ultra SCSI host adapter> found at PCI 9/0
(scsi0) Wide Channel, SCSI ID=7, 16/255 SCBs
(scsi0) Warning - detected auto-termination
(scsi0) Please verify driver detected settings are correct.
(scsi0) If not, then please properly set the device termination
(scsi0) in the Adaptec SCSI BIOS by hitting CTRL-A when prompted
(scsi0) during machine bootup.
(scsi0) Cables present (Int-50 YES, Int-68 YES, Ext-68 NO)
(scsi0) Downloading sequencer code... 419 instructions downloaded
scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.1.10/3.2.4
scsi : 1 host.
Detected scsi disk sda at scsi0, channel 0, id 1, lun 0
(scsi0:0:1:0) Synchronous at 10.0 Mbyte/sec, offset 8.
Detected scsi CD-ROM sr0 at scsi0, channel 0, id 4, lun 0
(scsi0:0:4:0) Synchronous at 4.4 Mbyte/sec, offset 15.
(scsi0:0:5:0) Synchronous at 4.4 Mbyte/sec, offset 8.
Detected scsi disk sdb at scsi0, channel 0, id 8, lun 0
(scsi0:0:8:0) Synchronous at 40.0 Mbyte/sec, offset 8.
Detected scsi disk sdc at scsi0, channel 0, id 9, lun 0
(scsi0:0:9:0) Synchronous at 40.0 Mbyte/sec, offset 8.
Detected scsi disk sdd at scsi0, channel 0, id 10, lun 0
(scsi0:0:10:0) Synchronous at 40.0 Mbyte/sec, offset 8.
scsi : detected 1 SCSI cdrom 4 SCSI disks total.
sr0: scsi3-mmc drive: 16x/16x writer cd/rw xa/form2 cdda tray
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to [EMAIL PROTECTED]
