I will try switching it to 0. It is set to 2 now, but it does boot my other 2 machines that way just fine. I think if you go into the Adaptec Utility at boot you can tell it which ID to boot from (and that is set to 2). Thanks, Eric Hidong Kim wrote: > > Hi, Eric, > > Is the SCSI ID of the drive set to 0 or 1? You can > only boot off of SCSI drives with ID 0 or 1. Good > luck, > > Hidong > > ---Eric Hegstrom <[EMAIL PROTECTED]> wrote: > > > > Hi all: > > > > OK I must be missing something here. > > > > I just got new PIII/450 on a Gigabyte GA-6BXC > motherboard. I dropped in > > my Adapted 2940 UW card and installed a removable > drive rack for my HD > > with RedHat 5.2 on it. It will not even attempt to > boot off the SCSI. It > > is obviosly a bios thing because this exact same > setup works fine from a > > couple of other computers I have. If I disable the > IDE drive w/Winblows > > '98 on it I get a message that no boot media was > found. The Adaptec > > bios appear to load just fome and I set it up to > load from that drive > > (#2) and seems to sees it OK. > > > > Has anyone had this type of problem? Am I going to > be stuck booting from > > a floppy -- ugly but workable. > > > > > > Peace, > > Eric > > > > -- > > Eric Hegstrom .~. > > Senior Software Engineer /V\ > > Sonoran Scanners, Inc. // \\ > L I N U X > > [EMAIL PROTECTED] /( )\ > >don't fear the penguin< > > 520-617-0072 x402 ^^-^^ > > > > - > > To unsubscribe from this list: send the line > "unsubscribe linux-scsi" in > > the body of a message to [EMAIL PROTECTED] > > > > _________________________________________________________ > DO YOU YAHOO!? > Get your free @yahoo.com address at http://mail.yahoo.com -- Eric Hegstrom .~. Senior Software Engineer /V\ Sonoran Scanners, Inc. // \\ L I N U X [EMAIL PROTECTED] /( )\ >don't fear the penguin< 520-617-0072 x402 ^^-^^ - To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to [EMAIL PROTECTED]
