Hi!
On Sat, 19 Jun 1999, Barrie Spence wrote:
> I've yet to try burning a CD, but I appear to have resolved
> all my initial problems with the bus hang on boot by upgrading
> to the 1.0g firmware (see http://www.yamahayst.com/).
>
> I've left the default settings for the Initio 9100W controller
> full synchronous transfer speed and with wide negotiation
> enabled (changing these settings didn't fix the problem under
> the 1.0f firmware).
If those default settings works when burning, keep them. ;-)
However, I´ve experienced major problems when trying to negotiate
syncronous transfer with some high-performance CD-burners at 20/40/80
(like the Plexwriter 8X) with scsi-adapters like I9100W and Adaptec
2940U2W. Irratic behavour followed by kernel-panic occured almost
every attempt to burn CDs. Changing the BIOS-settings to 10 and
disable wide negotiation proved successful on both adapters.
Happy Hacking!
// Henrik J.
>
> I've also set the blocksize to 512 bytes (via jumper) - I couldn't
> mount disks otherwise.
>
> Now to burn some disks....
>
> Barrie
>
>
> --
> Barrie Spence Sanity Clause? There is no Sanity Clause
> Home: [EMAIL PROTECTED] Telephone +44 1506 442304
> Play: [EMAIL PROTECTED]
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
> the body of a message to [EMAIL PROTECTED]
>
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to [EMAIL PROTECTED]
