Does this indicate a card problem, a cable problem or is my drive
giving up? Please copy me on replies, I am not on this list.
Linux ocs4 2.2.10 #1 Mon Jun 14 18:11:03 EST 1999 i586 unknown. ASUS
PCI SC875 card.
ncr53c8xx: at PCI bus 0, device 11, function 0
ncr53c8xx: 53c875 detected with Symbios NVRAM
ncr53c875-0: rev=0x03, base=0xffadff00, io_port=0xf600, irq=11
ncr53c875-0: Symbios format NVRAM, ID 7, Fast-20, Parity Checking
ncr53c875-0: initial SCNTL3/DMODE/DCNTL/CTEST3/4/5 = (hex) 05/0e/a0/01/00/24
ncr53c875-0: final SCNTL3/DMODE/DCNTL/CTEST3/4/5 = (hex) 05/46/a0/00/08/24
ncr53c875-0: on-chip RAM at 0xffade000
ncr53c875-0: resetting, command processing suspended for 2 seconds
ncr53c875-0: restart (scsi reset).
ncr53c875-0: enabling clock multiplier
ncr53c875-0: Downloading SCSI SCRIPTS.
scsi0 : ncr53c8xx - version 3.2
scsi : 1 host.
ncr53c875-0: command processing resumed
Vendor: IBM Model: DORS-32160 Rev: WA6A
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sda at scsi0, channel 0, id 0, lun 0
Vendor: PHILIPS Model: CDD2600 Rev: 1.07
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr0 at scsi0, channel 0, id 3, lun 0
Vendor: IBM Model: DDRS-39130W Rev: S97B
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sdb at scsi0, channel 0, id 4, lun 0
ncr53c875-0-<0,0>: tagged command queue depth set to 4
ncr53c875-0-<4,0>: tagged command queue depth set to 4
scsi : detected 1 SCSI cdrom 2 SCSI disks total.
ncr53c875-0-<3,*>: device did not report SYNC.
Uniform CDROM driver Revision: 2.55
ncr53c875-0-<0,*>: FAST-20 SCSI 20.0 MB/s (50 ns, offset 15)
SCSI device sda: hdwr sector= 512 bytes. Sectors= 4226725 [2063 MB] [2.1 GB]
ncr53c875-0-<4,*>: WIDE SCSI (16 bit) enabled.
ncr53c875-0-<4,*>: FAST-20 WIDE SCSI 40.0 MB/s (50 ns, offset 15)
SCSI device sdb: hdwr sector= 512 bytes. Sectors= 17850000 [8715 MB] [8.7 GB]
Partition check:
sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 >
sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 >
ncr53c875-0: SCSI parity error detected: SCR1=3 DBC=19000000 SSTAT1=f1
scsi : aborting command due to timeout : pid 135714, scsi0, channel 0, id 0, lun 0
Read (6) 06 4a a0 80 00
ncr53c8xx_abort: pid=135714 serial_number=135727 serial_number_at_timeout=135727
scsi : aborting command due to timeout : pid 135715, scsi0, channel 0, id 0, lun 0
Write (6) 0a f0 2a 02 00
ncr53c8xx_abort: pid=135715 serial_number=135728 serial_number_at_timeout=135728
ncr53c875-0: abort ccb=c3b0c820 (cancel)
scsi : aborting command due to timeout : pid 135716, scsi0, channel 0, id 0, lun 0
Write (6) 0b e7 e8 02 00
ncr53c8xx_abort: pid=135716 serial_number=135729 serial_number_at_timeout=135729
ncr53c875-0: abort ccb=c0098020 (cancel)
scsi : aborting command due to timeout : pid 135717, scsi0, channel 0, id 0, lun 0
Write (6) 09 49 88 02 00
ncr53c8xx_abort: pid=135717 serial_number=135730 serial_number_at_timeout=135730
ncr53c875-0: abort ccb=c0089020 (cancel)
scsi : aborting command due to timeout : pid 135718, scsi0, channel 0, id 4, lun 0
Write (6) 00 00 22 02 00
ncr53c8xx_abort: pid=135718 serial_number=135731 serial_number_at_timeout=135731
ncr53c875-0: abort ccb=c3380020 (cancel)
scsi : aborting command due to timeout : pid 135719, scsi0, channel 0, id 4, lun 0
Write (6) 04 00 36 02 00
ncr53c8xx_abort: pid=135719 serial_number=135732 serial_number_at_timeout=135732
ncr53c875-0: abort ccb=c0089820 (cancel)
scsi : aborting command due to timeout : pid 135720, scsi0, channel 0, id 4, lun 0
Write (6) 04 08 58 2a 00
ncr53c8xx_abort: pid=135720 serial_number=135733 serial_number_at_timeout=135733
ncr53c875-0: abort ccb=c3380820 (cancel)
SCSI host 0 abort (pid 135714) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
ncr53c8xx_reset: pid=135714 reset_flags=2 serial_number=135727
serial_number_at_timeout=135727
ncr53c875-0: resetting, command processing suspended for 2 seconds
ncr53c875-0: restart (scsi reset).
ncr53c875-0: enabling clock multiplier
ncr53c875-0: Downloading SCSI SCRIPTS.
ncr53c875-0: command processing resumed
ncr53c875-0-<0,*>: FAST-20 SCSI 20.0 MB/s (50 ns, offset 15)
ncr53c875-0-<4,*>: WIDE SCSI (16 bit) enabled.
ncr53c875-0-<4,*>: FAST-20 WIDE SCSI 40.0 MB/s (50 ns, offset 15)
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to [EMAIL PROTECTED]
