Ryan Kirkpatrick <[EMAIL PROTECTED]> wrote:
> I have double checked both SCSI chains to verify that cable length is less
> than maximum allowed for fast SCSI (3m). scsi0 is about 2.1m and scsi1 is
So I assume you have disabled, in the BIOS, all Ultra SCSI features, and
you have checked that Linux reports that the speed for each device
is not Ultra. Else you need 1.5 m maximum, and 30 cm minimum between
devices.
> Also, I am aware the Adaptec cards are not the greatest in terms
> of quality, especially due to the auto-termination mis-feature. I can not
The Linux aic7xxx driver presumably will tell you what setting the
card is in (dmesg).
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to [EMAIL PROTECTED]
