> Hello, I wrote:
> >>sym53c875-0: Downloading SCSI SCRIPTS.
> >>sym53c875-0:0: ERROR (c0:0) (8-0-0) (0/5) @ (script 38:f3100004).
The DSTAT value 0xc indicates that the chip detected a data parity error
on the PCI bus or a target signaling such a condition during a PCI data
phase, while the chip acted as a PCI master.
The value f3100004 looks bogus to me. It should be e3100004. Could you
confirm that. The possible causes highly depend on this value. In order
to avoid poor sci-fi, I will wait for your reply on that point, prior
to actually reponding to your problem report.
G�rard.
> >>sym53c875-0: script cmd = f31c0004
> >>sym53c875-0: regdump: ca 00 00 05 47 00 00 0e 71 08 00 00 80 00 08 02.
> >>scsi1 : sym53c8xx - version 1.3g
> >
> >and looping forever between resetting the scsi channel and getting
> >that SCSI script download error. I reproduced it with 2.2.5 through
> >2.2.12 (same sym53c8xx driver version anyway IIRC). Unfortunately I'm
> >too scared by eaten ext2fs's to test it with 2.3.x.
> I now tried it with 2.3.18ac8 and its included 1.5e of sym53c8xx and
> the problem still exists although the driver loops at regumping
> instead of reseting the channel forever. I also tried 2.2.12 with a
> sym53c8xx patched to 1.5d getting the same results.
>
> Sorry that I didn't try that first.
>
> Is anyone out there who could help me?
> --
> bye, Michael
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
> the body of a message to [EMAIL PROTECTED]
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to [EMAIL PROTECTED]
