On 24 Sep 1999, bernie zhu wrote:
> I have 4*8G seagate cheetah scsi disk,
> when I install RH60, RH6 need SCSI disk module option.
> I know it should be like this:
>
> ncr53c8xx=tags:4,sync:80,debug:0x200
V-----< option to ncr53c8xx.c driver(software of linux)
debug: Debugging levels , see the file below for description .
/usr/src/linux/drivers/scsi/README.ncr53c8xx
tags: Number of queued commands
sync: Synchronous speed in Mhz (afaicr)
> But where can I find the number for my computer?
>
> when I startup computer, I press ctrl+c, enter the symbios,
> but I don't find debug and tags
But there is a option in the symbios setup/bios to
enable or disable 'tagged command queueing' look for
any combination of those words & make sure it is 'enabled' .
Hth, JimL
> thank u very much
+-----------------------------------------------------------------+
| James W. Laferriere | System Techniques | Give me VMS |
| Network Engineer | 25416 22nd So | Give me Linux |
| [EMAIL PROTECTED] | DesMoines WA 98198 | only on AXP |
+-----------------------------------------------------------------+
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to [EMAIL PROTECTED]
