Hi Michael,
you wrote:
> Should the host adapter bios see the drive? If so, I have a problem.
You probably have a problem...
Well, I don't know the mylex controller and the ADIC tape, but I've got an
adaptec 2940 on an IBM compatible PC with a SONY DAT tape drive. When I
boot my PC, the controller bios scans all SCSI devices and displays them.
You probably (again) want to check SCSI ids, bus termination etc...
Hope that helps.
Mit freundlichen Gruessen / best regards
Michael Kwasigroch
FaxPlus/Open Development
________________________________________
eMail: [EMAIL PROTECTED]
INTERCOPE GmbH, Hamburg, Bebelallee 72
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to [EMAIL PROTECTED]
