Heres the log but theres not much to go on.
Oct 26 21:05:53 jesse kernel: Loaded 7418 symbols from
/usr/src/linux/System.map.
Oct 26 21:05:53 jesse kernel: Symbols match kernel version 2.2.10.
Oct 26 21:05:53 jesse kernel: Error seeking in /dev/kmem
Oct 26 21:05:53 jesse kernel: Error adding kernel module table entry.
Oct 26 21:05:53 jesse kernel: Linux version 2.2.10 ([EMAIL PROTECTED])
(gcc version 2.7.2.3) #4 Mon Aug 16 21:35:34 CDT 1999
Oct 26 21:05:53 jesse kernel: Detected 451033820 Hz processor.
Oct 26 21:05:53 jesse kernel: Console: colour VGA+ 80x25
Oct 26 21:05:53 jesse kernel: Calibrating delay loop... 897.84 BogoMIPS
Oct 26 21:05:53 jesse kernel: Memory: 95580k/98240k available (968k kernel
code, 412k reserved, 1224k data, 56k init)
Oct 26 21:05:53 jesse kernel: CPU: AMD AMD-K6(tm) 3D processor stepping 0c
Oct 26 21:05:53 jesse kernel: Checking 386/387 coupling... OK, FPU using
exception 16 error reporting.
Oct 26 21:05:53 jesse kernel: Checking 'hlt' instruction... OK.
Oct 26 21:05:53 jesse kernel: POSIX conformance testing by UNIFIX
Oct 26 21:05:53 jesse kernel: mtrr: v1.35 (19990512) Richard Gooch
([EMAIL PROTECTED])
Oct 26 21:05:53 jesse kernel: PCI: PCI BIOS revision 2.10 entry at 0xfb270
Oct 26 21:05:53 jesse kernel: PCI: Using configuration type 1
Oct 26 21:05:53 jesse kernel: PCI: Probing PCI hardware
Oct 26 21:05:53 jesse kernel: PCI: 00:38 [1106/0586]: Work around ISA DMA
hangs
(00)
Oct 26 21:05:53 jesse kernel: Activating ISA DMA hang workarounds.
Oct 26 21:05:53 jesse kernel: Linux NET4.0 for Linux 2.2
Oct 26 21:05:53 jesse kernel: Based upon Swansea University Computer
Society NET3.039
Oct 26 21:05:53 jesse kernel: NET4: Unix domain sockets 1.0 for Linux
NET4.0.
Oct 26 21:05:53 jesse kernel: NET4: Linux TCP/IP 1.0 for NET4.0
Oct 26 21:05:53 jesse kernel: IP Protocols: ICMP, UDP, TCP
Oct 26 21:05:53 jesse kernel: IPv4 over IPv4 tunneling driver
Oct 26 21:05:53 jesse kernel: early initialization of device tunl0 is
deferred
Oct 26 21:05:53 jesse kernel: Starting kswapd v 1.5
Oct 26 21:05:53 jesse kernel: parport0: PC-style at 0x378 [SPP,PS2]
Oct 26 21:05:53 jesse kernel: Detected PS/2 Mouse Port.
Oct 26 21:05:53 jesse kernel: Serial driver version 4.27 with no serial
options
enabled
Oct 26 21:05:53 jesse kernel: ttyS00 at 0x03f8 (irq = 4) is a 16550A
Oct 26 21:05:53 jesse kernel: ttyS01 at 0x02f8 (irq = 3) is a 16550A
Oct 26 21:05:53 jesse kernel: pty: 256 Unix98 ptys configured
Oct 26 21:05:53 jesse kernel: lp0: using parport0 (polling).
Oct 26 21:05:53 jesse kernel: Real Time Clock Driver v1.09
Oct 26 21:05:53 jesse kernel: loop: registered device at major 7
Oct 26 21:05:53 jesse kernel: VP_IDE: IDE controller on PCI bus 00 dev 39
Oct 26 21:05:53 jesse kernel: VP_IDE: not 100ative mode: will probe irqs
later
Oct 26 21:05:53 jesse kernel: ide0: BM-DMA at 0xe000-0xe007, BIOS
settings:
hda:DMA, hdb:DMA
Oct 26 21:05:53 jesse kernel: ide1: BM-DMA at 0xe008-0xe00f, BIOS
settings:
hdc:DMA, hdd:DMA
Oct 26 21:05:53 jesse kernel: hda: Maxtor 91080D5, ATA DISK drive
Oct 26 21:05:53 jesse kernel: hdb: QUANTUM TRB850A, ATA DISK drive
Oct 26 21:05:53 jesse kernel: hdd: 36X CD-ROM, ATAPI CDROM drive
Oct 26 21:05:53 jesse kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Oct 26 21:05:53 jesse kernel: ide1 at 0x170-0x177,0x376 on irq 15
Oct 26 21:05:53 jesse kernel: hda: Maxtor 91080D5, 10300MB w/512kB Cache,
CHS=20928/16/63, UDMA
Oct 26 21:05:53 jesse kernel: hdb: QUANTUM TRB850A, 810MB w/96kB Cache,
CHS=823/32/63, DMA
Oct 26 21:05:53 jesse kernel: hdd: ATAPI 24X CD-ROM drive, 128kB Cache
Oct 26 21:05:53 jesse kernel: Uniform CDROM driver Revision: 2.55
Oct 26 21:05:53 jesse kernel: Floppy drive(s): fd0 is 1.44M
Oct 26 21:05:53 jesse kernel: FDC 0 is a post-1991 82077
_____________________________________________________________________________
Thats where my scsi kernel will lock up everytime booting.
And a module is worse I don't get any errors.
Thanks again.
Terry.
On Tue, 26 Oct 1999 [EMAIL PROTECTED] wrote:
>
> Okay someone suggested I try changing ide1 and I went one step farther
> and still 2.2.10 locks up even without ide1 so that tosses that idea out
> the window.
> I'm d/ling 2.2.13 is there anything new in the scsi part of the kernel
> that could help with this problem I really need to get this PCI scsi card
> working.
> Thanks for the few comments.
> Terry
>
> On Mon, 25 Oct 1999 [EMAIL PROTECTED] wrote:
>
> > Help please.
> > I got a Kouwell Ultra SCSI PCI card and the driver isn't working it locks
> > the kernel and I have to hard boot.
> > RedHat 5.2
> > Kernel 2.2.10
> > AMD K6-2 450
> > Soyo MB.
> > Initio 9400 based scsi card.
> > Thanks for any advice.
> > I've compiled the driver as module and statically and it locks up
> > everytime.
> > If it will help heres my /proc/pci for it.
> >
> > Bus 0, device 9, function 0:
> > SCSI storage controller: Initio Corp Unknown device (rev 1).
> > Vendor id=1101. Device id=9400.
> > Medium devsel. IRQ 9. Master Capable. Latency=64.
> > I/O at 0xe800 [0xe801].
> > Non-prefetchable 32 bit memory at 0xc8000000 [0xc8000000].
> >
> > Thanks
> > Terry
> > [EMAIL PROTECTED]
> >
> >
> >
>
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
> the body of a message to [EMAIL PROTECTED]
>
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to [EMAIL PROTECTED]
