I have this same controller connected to an old CDR in my machine, I load it as
a module:
/sbin/modprobe aha152x aha152x=0x140,11
it has always worked flawlessly this way. Just to negate the obvious, have you
checked scsi bus termination on your last device?
Russell
On 27-Oct-99 ejcpons wrote:
>
> hello,
> beginer in Linux word, I have a problem with my scsi card, an adaptec 1505.
>
> with Suse 6.1 kernel 2.2.5
>
> at Liunx boot, I can read :
> scsi : 0 hosts
> scsi : detected total
>
> When I use manualy modprobe aha152x aha 152x=0x140,11,1 - I haven't any
> error messages
> and the sgcheck command detect my two scsi devices (scanner, r and rw cd
> drive)
>
> I also use at lilo prompt the command aha152x=....... or in lilo.conf
> append=aha......
> without any effect.
>
> I also use in conf.modules a line options aha...... without success
>
>
> Please, before i burn my PC, who can help me!!!!
>
> thank you
>
> JC
>
> [EMAIL PROTECTED]
>
>
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
> the body of a message to [EMAIL PROTECTED]
Words to Live by...
Work like you don't need money,
Love like you've never been hurt,
Dance like nobody's watching.
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to [EMAIL PROTECTED]
