Please cc: me with any replies, I'm not on the list. 2.3.24 got an illegal SCSI phase. The machine has been running hard on 2.3.24 since October 28, this is the first problem. I don't think it is cables or termination, this configuration has been working for months without being touched. Linux version 2.3.24 (keith@ocs4) (gcc version egcs-2.91.66 19990314/Linux (egcs-1.1.2 release)) #2 Thu Oct 28 21:37:06 EST 1999 Initializing CPU#0 Detected 167045219 Hz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 66.56 BogoMIPS Memory: 58428k/61440k available (0k kernel code, 0k reserved, 0k data, 0k init, 0k highmem) CPU: Intel Pentium 75 - 200 stepping 0c Intel Pentium with F0 0F bug - workaround enabled. ncr53c8xx: at PCI bus 0, device 11, function 0 ncr53c8xx: 53c875 detected with Symbios NVRAM ncr53c875-0: rev=0x03, base=0xffadff00, io_port=0xf600, irq=11 ncr53c875-0: Symbios format NVRAM, ID 7, Fast-20, Parity Checking ncr53c875-0: initial SCNTL3/DMODE/DCNTL/CTEST3/4/5 = (hex) 05/0e/a0/01/00/24 ncr53c875-0: final SCNTL3/DMODE/DCNTL/CTEST3/4/5 = (hex) 05/46/a0/00/08/24 ncr53c875-0: on-chip RAM at 0xffade000 ncr53c875-0: resetting, command processing suspended for 2 seconds ncr53c875-0: restart (scsi reset). ncr53c875-0: enabling clock multiplier ncr53c875-0: Downloading SCSI SCRIPTS. scsi0 : ncr53c8xx - 3.2c scsi : 1 host. ncr53c875-0: command processing resumed Vendor: IBM Model: DORS-32160 Rev: WA6A Type: Direct-Access ANSI SCSI revision: 02 Detected scsi disk sda at scsi0, channel 0, id 0, lun 0 Vendor: PHILIPS Model: CDD2600 Rev: 1.07 Type: CD-ROM ANSI SCSI revision: 02 Detected scsi CD-ROM sr0 at scsi0, channel 0, id 3, lun 0 Vendor: IBM Model: DDRS-39130W Rev: S97B Type: Direct-Access ANSI SCSI revision: 02 Detected scsi disk sdb at scsi0, channel 0, id 4, lun 0 ncr53c875-0-<0,0>: tagged command queue depth set to 4 ncr53c875-0-<4,0>: tagged command queue depth set to 4 scsi : detected 1 SCSI cdrom 2 SCSI disks total. ncr53c875-0-<3,*>: device did not report SYNC. Uniform CD-ROM driver Revision: 3.05 ncr53c875-0-<0,*>: FAST-20 SCSI 20.0 MB/s (50 ns, offset 15) SCSI device sda: hdwr sector= 512 bytes. Sectors= 4226725 [2063 MB] [2.1 GB] ncr53c875-0-<4,*>: WIDE SCSI (16 bit) enabled. ncr53c875-0-<4,*>: FAST-20 WIDE SCSI 40.0 MB/s (50 ns, offset 15) SCSI device sdb: hdwr sector= 512 bytes. Sectors= 17850000 [8715 MB] [8.7 GB] Partition check: sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 > sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 > ... ncr53c875-0-<0,0>: illegal scsi phase (4/5). ncr53c875-0-<0,0>: COMMAND FAILED (89 0) @c11d9820. ncr53c875-0-<0,0>: phase change 2-3 6@011dda45 resid=6. ncr53c875-0-<0,0>: illegal scsi phase (4/5). ncr53c875-0-<0,0>: COMMAND FAILED (89 0) @c3a54020. ncr53c875-0-<0,0>: phase change 2-7 6@011dda45 resid=5. ncr53c875-0-<0,0>: phase change 2-7 6@011ddc45 resid=5. scsi : aborting command due to timeout : pid 150849, scsi0, channel 0, id 0, lun 0 Write (6) 06 c8 22 04 00 ncr53c8xx_abort: pid=150849 serial_number=150864 serial_number_at_timeout=150864 ncr53c875-0: abort ccb=c3a54020 (cancel) SCSI host 0 abort (pid 150849) timed out - resetting SCSI bus is being reset for host 0 channel 0. ncr53c8xx_reset: pid=150849 reset_flags=2 serial_number=150864 serial_number_at_timeout=150864 ncr53c875-0: resetting, command processing suspended for 2 seconds ncr53c875-0: restart (scsi reset). ncr53c875-0: enabling clock multiplier ncr53c875-0: Downloading SCSI SCRIPTS. ncr53c875-0: command processing resumed ncr53c875-0-<0,*>: FAST-20 SCSI 20.0 MB/s (50 ns, offset 15) ncr53c875-0-<4,*>: WIDE SCSI (16 bit) enabled. ncr53c875-0-<4,*>: FAST-20 WIDE SCSI 40.0 MB/s (50 ns, offset 15) - To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to [EMAIL PROTECTED]
