Hi,
With a Western Digital WDE 19310 Ultra3 disk, I get the following
console messages.
sym53c896-0-<1,0>: M_REJECT to send for : 23-1.
sym53c896-0-<1,0>: M_REJECT to send for : 23-1.
sym53c896-0-<1,0>: M_REJECT to send for : 23-1.
This seems to be happending when the system does an INQUIRY command
which gets a Wide residue ignore message because of getting an odd
number of bytes. I notice the driver has code that should deal with this
message, but that code may not be connected correctly. The driver
rejects the message.
Any ideas?
<>< Lance.
------------------------------------------------------------------------------
Here is a picture from a scsi analyzer...
Protocol Phase Analysis
Session ids: iids:7 tid(lun)[devtype]:0(0)[0] 1(0)[0]
NNNNN = Timing Event Number (1st event is 0)
SSS.mmm_uuu_nnn = Absolute Time (Secs.milli_micro_nano)
NNNNN SSS.mmm_uuu_nnn
34178 137.171_287_850 Bus Free
34180 137.190_924_130 Arb
34181 137.190_927_730 Arbwin 7
34183 137.190_929_940 +Select 7,1
34186 137.190_930_740 +Sel/Resel End
34190 137.190_931_455 +MsgOut C0 Identify
20 Simple Queue
2F Tag
34207 137.190_934_235 CMD - Inquiry
12 00 00 00 FF 00
34240 137.191_735_230 DataIn (W)
00 00 02 02 FA 00 00 3E .......>
57 44 49 47 54 4C 20 20 WDIGTL
57 44 45 31 38 33 31 30 WDE18310
20 55 4C 54 52 41 33 20 ULTRA3
(32 Bytes)
34272 137.191_744_030 DEnd 256 Bytes 29.09 MB/S
34275 137.191_854_325 MsgIn 23 Wide Residue
01 Ignore
34289 137.248_736_005 +MsgOut 07 Msg Reject
34300 137.249_015_855 Status 00 Good
34305 137.249_030_680 MsgIn 00 Cmd Complete
34310 137.249_034_540 Bus Free
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to [EMAIL PROTECTED]
