Trying to install RH6 on two Compaqs, both exhibit this problem.
>From dmesg:
SIS5513: IDE controller on PCI bus 00 dev 01
SIS5513: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x4000-0x4007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0x4008-0x400f, BIOS settings: hdc:DMA, hdd:DMA
hda: ST38421A, ATA DISK drive
hdc: LTN323, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: ST38421A, 8063MB w/256kB Cache, CHS=1027/255/63
hdc: ATAPI 32X CD-ROM drive, 120kB Cache
[...]
hda: status timeout: status=0xd0 { Busy }
hda: no DRQ after issuing WRITE
ide0: reset: success
The disk is actually usable, but I'm still worried about
this error message. I can't believe both systems have a faulty disk,
so maybe this is a known IDE driver problem?
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to [EMAIL PROTECTED]
