I'm trying to get linux installed on a Data General AV/5900 machine that has
both an AHA-4944UWD and an AHA-2944UWD scsi adapter in it. The problem
comes when we cable up a Clariion disk array to it, the bios comes up and
sees the multiple LUNs just fine but when the installer gets to where it
wants to start partitioning we start to have problems. If we're cabled up
to the AHA-4944, then the installer dies a miserable death and prints a
bunch of garbage to the screen. I'm assuming this card isn't supported
since its not listed in the aic7xxx readme. If we are attached to the
AHA-2944 then the installer is fine, but it *only* sees LUN 0. At this
point I don't care which card I use, I just want to know if other people
have had success using either of these cards and if they have, what they did
to get them to work correctly with an external device such as a disk array.
I've downloaded the newest driver disk from Doug Ledfords web site and that
didn't seem to make any difference either. Any help would be greatly
appreciated.
Sauke
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to [EMAIL PROTECTED]
