Mark,
There is source code available for JNI adapters. You can download it from
there web site. At this point it seems that Qlogic is still the adapter
of choice. It is supported both from Qlogic as well as Chris Loveland.
We use the 2XXX adapters which support both fabric and loops successfully
although not perfectly. As far as drives and enclosures look for an
e-mail from Erling Nyguard, he is quite knowlegeable in this area.
Jason Wachholz
U of Minnesota
Fibre Channel Research
On Sun, 30 Apr 2000, Mark Mokryn wrote:
> We're building SAN infrastructure stuff, and we're looking to test
> FC/Linux. Regarding adapter selection, it seems the way to go is Qlogic,
> since:
> 1) No source code for JNI adapter
> 2) HP Tachyon chipset on Interphase adapters much older than Qlogic/JNI
> ASICs
>
> Any other opinions on this topic?
>
> We're also looking for FC disks to test. Does anyone know of
> (relatively) inexpensive FC JBODs/RAIDs which are known to work under
> Linux, and can work in both loop and fabric configurations?
>
> Thanks,
> -Mark
>
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
> the body of a message to [EMAIL PROTECTED]
>
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to [EMAIL PROTECTED]
