Hi, all. I've got an SGI 1400L with 4 QLogic 2100 FC cards. The box
came with a (presumably hacked) 2.2.10 kernel which detects the cards
correctly and finds SCSI drives attached (inside some vaults).
But with 2.3.99-pre6, the cards are detected but no SCSI drives are
found. Is there a known problem with the qlogicfc driver, or is there
some hidden magic that I need to apply? I've appended the relevant
parts of my .config.
When I install the qlogicfc module, I get the following:
qlogicfc0 : new isp2x00 revision ID (4)
qlogicfc0 : Loop Reinitialized
qlogicfc0 : Link is Up
qlogicfc1 : new isp2x00 revision ID (4)
qlogicfc1 : Loop Reinitialized
qlogicfc1 : Link is Up
qlogicfc2 : new isp2x00 revision ID (4)
qlogicfc2 : Loop Reinitialized
qlogicfc2 : Link is Up
qlogicfc3 : new isp2x00 revision ID (4)
qlogicfc3 : link is not up
scsi3 : QLogic ISP2100 SCSI on PCI bus 00 device 38 irq 17 base 0x2000
scsi4 : QLogic ISP2100 SCSI on PCI bus 00 device 48 irq 18 base 0x2800
scsi5 : QLogic ISP2100 SCSI on PCI bus 01 device 08 irq 19 base 0x3000
scsi6 : QLogic ISP2100 SCSI on PCI bus 01 device 10 irq 20 base 0x3400
scsi : 7 hosts.
qlogicfc0 : Port Database
wwn: 200000e08b003cac scsi_id: 0 loop_id: 2
wwn: 5006094670405c86 scsi_id: 1 loop_id: 0
wwn: 5006094670405c81 scsi_id: 2 loop_id: 1
qlogicfc1 : Port Database
wwn: 200000e08b0039ac scsi_id: 0 loop_id: 2
wwn: 5006094670405a00 scsi_id: 1 loop_id: 0
wwn: 5006094670405c7d scsi_id: 2 loop_id: 1
qlogicfc2 : Port Database
wwn: 200000e08b002a8c scsi_id: 0 loop_id: 2
wwn: 5006094670405c85 scsi_id: 1 loop_id: 0
wwn: 5006094670405c79 scsi_id: 2 loop_id: 1
Regards,
Richard....
Permanent: [EMAIL PROTECTED]
Current: [EMAIL PROTECTED]
===============================================================================
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
CONFIG_SCSI_QLOGIC_FC=m
# CONFIG_SCSI_QLOGIC_1280 is not set
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to [EMAIL PROTECTED]
