Alan Cox wrote:
>
> > After upgrading to the 2.2.16 kernel, with or without the errata patch,
> > my HP 5P scanner supplied sym53c416 SCSI interface board stopped
> > working. Kernels 2.2.12 through 2.2.15 have no problem.
>
> There are no changes between 2.2.15 -> 2.2.16 for the sym416 driver.
>
> > I have an ATAPI CD-RW that needs the IDE-SCSI module and I think this is
> > where the problem lies. I have had problems with interactions between
> > IDE-SCSI and the IDE subsystems locking up my system in the past when I
> > used hdparm to unmask interrupts on my IDE drive (-u1 flag).
>
> There are tiny ide-scsi changes but they should be independant
>
> > I already checked that the sym53c416 has not changed between 2.2.15 and
> > 2.2.16.
>
> Try 2.2.16pre kernels. See if you can find out where it broke (start in the
> middle of the range and binary search)
The break happens in 2.2.16pre5. 2.2.16pre4 works fine.
I will see if I can isolate the change. Thanks for the direction.
-Shawn Houston
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to [EMAIL PROTECTED]
