>> Executing 'mode select g1' command on Bus 0 Target 0, Lun 0 timeout 40s
>> CDB: 55 10 00 00 00 00 00 00 10 00
>> cdrecord: Input/output error. mode select g1: scsi sendcmd: retryable
error
>> CDB: 55 10 00 00 00 00 00 00 10 00
>> status: 0x2 (CHECK CONDITION)
>> Sense Bytes: 70 00 05 00 00 00 00 06 00 00 00 00 26 00 00 00
>> Sense Key: 0x5 Illegal Request, Segment 0
>> Sense Code: 0x26 Qual 0x00 (invalid field in parameter list) Fru 0x0
>> Sense flags: Blk 0 (not valid)
>> cmd finished after 0.006s timeout 40s
>Can't see any memory allocation problem there. It looks
>as if the cdwriter didn't like that MODE SELECT(10) command
>it was given. Did this cdwriter work with some other
>combination of linux kernel+cdrecord?
Yeah, it looks that way. Has anyone ever seen this with any ATAPI or even
SCSI cd roms? An alternate parameter list for this command or anything?
Because it says "invalid field in parameter list" and maybe its a quirky
implementation by the drive or something.
I will try the cdwrite list also.
Thanks,
Randy
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to [EMAIL PROTECTED]
