Hi Lawson,
you wrote:
> > /proc/tty/driver/serial:
> > serinfo:1.0 driver:4.27
> > 0: uart:16550A port:3F8 irq:0 baud:1200 tx:0 rx:18142 RTS|DTR|DSR
> > 1: uart:16550A port:2F8 irq:0 baud:9600 tx:0 rx:0
>
> This looks _wrong_____________^ With 2.2.1[34] ttyS[01] default to
> IRQ[43] :-). Have you got a stray setserial to set them to 0? Maybe
> try setting them back how they should be by hand or in rc.local?
>
> serinfo:1.0 driver:4.27
> 0: uart:16450 port:3F8 irq:4 baud:57600 tx:0 rx:0
> 1: uart:16450 port:2F8 irq:3 baud:9600 tx:0 rx:0
> 2: uart:unknown port:3E8 irq:4
> 3: uart:16550A port:2E8 irq:5 baud:9600 tx:1188 rx:23471 CTS
>
> > 2: uart:unknown port:3E8 irq:4
> > 3: uart:unknown port:2E8 irq:3
> >
BINGO! MANY THANKS!
I corrected the setserial and voila... Hmm, my oversight, sorry... Strange
that it even worked at all. Linux is indeed good software.
BTW: This also solved a sloppy gpm (slow mouse). GREAT!!!
Mit freundlichen Gruessen / best regards
Michael Kwasigroch
FaxPlus/Open Development
________________________________________
eMail: [EMAIL PROTECTED]
INTERCOPE GmbH, Hamburg, Bebelallee 72
-
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to [EMAIL PROTECTED]
