Hai Linuxers,
Saya sedang menginstall slackware 7.0 di komputer dengan spesifikasi:
MB Asus P2B-LS (SCSI adapter on-board)
HDD Seagate Barracuda 18GB - ST 318436LW
RAM 128MB
tetapi pada saat booting menggunakan CD slack 7.0 tersebut muncul
error berikut:
...
...
SCSI: <fdomain> Detection failed (no card)
NCR53c406a: no available ports found
sym53c416.c: Version 1.0.0
scsi 0: Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI)
5.1.20/3.2.4
<Adaptec AIC-7890/1 Ultra2 SCSI host adapter>
scsi: 1 host
scsi: aborting command due to timeout: pid 0, scsi0, channel 0, id0,
lun 0 0x
00 00 00 00 00 00
SCSI host 0 abourt (pid 0) timed out - resetting
SCSI host 0 channel 0 reset (pid 0) timed out
SCSI bus is being reset for host 0 channel 0.
SCSI host 0 abourt (pid 0) timed out - resetting
SCSI host 0 channel 0 reset (pid 0) timed out
SCSI bus is being reset for host 0 channel 0.
SCSI host 0 abourt (pid 0) timed out - resetting
SCSI host 0 channel 0 reset (pid 0) timed out
SCSI bus is being reset for host 0 channel 0.
SCSI host 0 abourt (pid 0) timed out - resetting
SCSI host 0 channel 0 reset (pid 0) timed out
SCSI bus is being reset for host 0 channel 0.
...
...
Kira-kira kenapa yah?
Dengan hardware yang sama, tetapi harddisk Seagate Barracuda 9.1GB
(ST39175LW), sama sekali tidak mengalami masalah.
Apakah slackware 7.0 tidak sanggup meng-handle Seagate Barracuda
dengan size 18 GB?
Mohon pencerahannya. Thanks in advance... :)
-- Surya --
--------------------------------------------------------------------------
Utk berhenti langganan, kirim email ke [EMAIL PROTECTED]
Informasi arsip di http://www.linux.or.id/milis.php3
Pengelola dapat dihubungi lewat [EMAIL PROTECTED]
