ganti bagian : Section "Pointer" > Protocol "PS/2" > ZAxisMapping "4 5" > Device "/dev/mouse"
pada protokolnya diganti : > Protocol "PS/2 -> > protocol "IMPS/2" terus jalanin startx nya, moga x2 berjalan.. regards Irvan > mas Aquy.. > saya udah coba di edit /etc/X11/XF86Config untuk scrolling mousenya.. > tapi tetep nggak bisa tuh, mouse saya masih blom bisa scrolling.. > saya pake redhat7.3, mouse logitech ps/2.. > > berikut saya lampirkan file yg telah saya edit tsb : > > Pointer section > # ********************************************************************** > > Section "Pointer" > Protocol "PS/2" > ZAxisMapping "4 5" > Device "/dev/mouse" > > # When using XQUEUE, comment out the above two lines, and uncomment > # the following line. > > # Protocol "Xqueue" > > # Baudrate and SampleRate are only for some Logitech mice > > # BaudRate 9600 > # SampleRate 150 > > # Emulate3Buttons is an option for 2-button Microsoft mice > # Emulate3Timeout is the timeout in milliseconds (default is 50ms) > > Emulate3Buttons > Emulate3Timeout 50 > > # ChordMiddle is an option for some 3-button Logitech mice > > # ChordMiddle > > EndSection > -----------------------o0o--------------------- > > mohon pencerahannya.. > > regards, > -------- > t0n0 > -------- > > > > Aquy wrote: > >> -----BEGIN PGP SIGNED MESSAGE----- >> Hash: SHA1 >> >> On Sunday 10 August 2003 09:29, Rahadi M. Mantikno wrote: >> > rekan-rekan .. >> > >> > supaya scroll mouse yg biasa dipake di windows, " scroll " nya juga >> bisa >> > dipake >> > di linux bagaimana caranya yaa? >> >> cari file /etc/X11/XF86Config >> Lalu buka dengan editor dan cari pada bagian "mouse", seperti ini : >> >> ################################################################### >> Section "InputDevice" >> >> # Identifier and driver >> >> Identifier "Mouse1" >> Driver "mouse" >> >> # On platforms where PnP mouse detection is supported the following >> # protocol setting can be used when using a newer PnP mouse: >> ################################################################### >> >> Lalu ubah opsi "Protocol" dengan "IMPS/2", seperti ini : >> >> Option "Protocol" "IMPS/2" >> >> Dan tambahkan opsi "ZAxisMapping", seperti ini : >> >> Option "ZAxisMapping" "4 5" > > .. > > > -- > Berhenti langganan: [EMAIL PROTECTED] > Arsip dan info: http://linux.or.id/milis.php > FAQ: [EMAIL PROTECTED] > > -- Berhenti langganan: [EMAIL PROTECTED] Arsip dan info: http://linux.or.id/milis.php FAQ: [EMAIL PROTECTED]
