Hi all.
since about 2 weeks i've installed a haupauge WinTV-radio (bt878) and my
box crashes reproduceable with:
Oct 7 23:23:21 tower kernel: 0>Kernel panic: CPU #0:Attempted flush tlb
IPI when not AKP(=255)
My Setup is:
Gigabyte 586DX with
2x P200MMX (NOT overclocked)
128MB EDO 60ns
AIC-7880U (onboard)
Matrox Millennium (rev 1)
Brooktree 878 with 36e (?Radio decoder?)
DEC DC21140 Network-card
NCR 53c860 (not used most of the time, for cd-writer or scanner)
Triton II Chipset
IBM DCAS-34330W on onboard SCSI-UW
(Fujitsu M2513A, HP C1533A dat-tape, toshiba cd-rom xm5701ta)
IBM DHEA-36481 on onboard EIDE
i'm running 2.0.36pre12, and accelerated-X 2.1. To watch TV i use
xawtv-2.27 (witch comes with bttv 0.5.15)
Some more from /var/log/messages
--- cut ---
Oct 7 23:23:21 tower kernel: bttv0: Brooktree Bt878 (rev 2) bus: 0, devfn: 80, irq:
10, memory: 0xe0804000.
Oct 7 23:23:21 tower kernel: bttv: 1 Bt848 card(s) found.
Oct 7 23:23:21 tower kernel: bttv0: PLL: 28636363 => 35468950 ... ok
Oct 7 23:23:21 tower kernel: bttv0: Hauppauge eeprom: tuner=Phillips FM1216 (5)
Oct 7 23:23:21 tower kernel: bttv0: model: BT878(Hauppauge old)
Oct 7 23:23:21 tower kernel: i2c: bus registered: bt848-0
Oct 7 23:23:21 tower kernel: i2c: device attached: tuner (addr=0xc2, bus=bt848-0,
driver=tuner)
Oct 7 23:23:21 tower kernel: msp3400: init: chip=MSP3410D-B4, has NICAM support
Oct 7 23:23:21 tower kernel: 0>Kernel panic: CPU #0:Attempted flush tlb IPI when not
AKP(=255)
Oct 7 23:23:21 tower kernel:
Oct 7 23:23:21 tower kernel: Aiee: scheduling in interrupt 08876e09
Oct 7 23:23:21 tower last message repeated 3 times
Oct 7 23:23:21 tower kernel: Aiee: scheduling in interrupt 00117751
Oct 7 23:28:37 tower syslogd 1.3-0: restart.
--- cut ---
Obviosely i've rebooted between the last 2 lines.
Anybody any hints.
Cu, Goetz.
