Hallo,
I've got a Siemens Primergy 2 x 400 PII, 256 MB RAM
Today I installed kernel 2.2.0-pre8. During booting the following warning
was written to log:
<4> WARNING: unexpected IO-APIC, please mail
<4> to [EMAIL PROTECTED]
<4>....... : IO APIC version: 0011
I send you the boot log file
~Klaus
Inspecting /boot/System.map
Loaded 7100 symbols from /boot/System.map.
Symbols match kernel version 2.2.0.
No module symbols loaded.
klogd 1.3-3, log source = /proc/kmsg started.
<4>Linux version 2.2.0-pre8 (root@dnsi-new) (gcc version egcs-2.91.60
19981201 (egcs-1.1.1 release)) #2 SMP Wed Jan 20 15:58:48 MET 1999
<4>Intel MultiProcessor Specification v1.4
<4> Virtual Wire compatibility mode.
<4>OEM ID: SNID1031 Product ID: PRIMERGY APIC at: 0xFEE00000
<4>Processor #1 Pentium(tm) Pro APIC version 17
<4>Processor #0 Pentium(tm) Pro APIC version 17
<4>I/O APIC #2 Version 17 at 0xFEC00000.
<4>Processors: 2
<4>mapped APIC to ffffe000 (fee00000)
<4>mapped IOAPIC to ffffd000 (fec00000)
<4>Detected 396821275 Hz processor.
<4>Console: colour VGA+ 80x25
<4>Calibrating delay loop... 395.67 BogoMIPS
<4>Memory: 257120k/262144k available (1108k kernel code, 420k reserved,
3432k data, 64k init)
<5>VFS: Diskquotas version dquot_6.4.0 initialized
<6>Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
<6>Checking 'hlt' instruction... OK.
<4>POSIX conformance testing by UNIFIX
<4>mtrr: v1.26 (19981001) Richard Gooch ([EMAIL PROTECTED])
<4>per-CPU timeslice cutoff: 100.20 usecs.
<4>CPU1: Intel Pentium II (Deschutes) stepping 02
<4>calibrating APIC timer ...
<4>..... CPU clock speed is 396.8495 MHz.
<4>..... APIC bus clock speed is 99.2121 MHz.
<4>Booting processor 0 eip 2000
<4>Calibrating delay loop... 396.49 BogoMIPS
<4>OK.
<4>CPU0: Intel Pentium II (Deschutes) stepping 02
<6>Total of 2 processors activated (792.17 BogoMIPS).
<4>enabling symmetric IO mode... ...done.
<4>ENABLING IO-APIC IRQs
<4>init IO_APIC IRQs
<4> IO-APIC pin 0, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29,
30, 31 not connected.
<4>number of MP IRQ sources: 16.
<4>number of IO-APIC registers: 32.
<4>testing the IO APIC.......................
<4>.... register #00: 02000000
<4>....... : physical APIC id: 02
<4>.... register #01: 001F0011
<4>....... : max redirection entries: 001F
<4> WARNING: unexpected IO-APIC, please mail
<4> to [EMAIL PROTECTED]
<4>....... : IO APIC version: 0011
<4>.... register #02: 00000000
<4>....... : arbitration: 00
<4>.... IRQ redirection table:
<4> NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
<4> 00 000 00 1 0 0 0 0 0 0 00
<4> 01 000 00 0 0 0 0 0 1 1 59
<4> 02 0FF 0F 0 0 0 0 0 1 1 51
<4> 03 000 00 0 0 0 0 0 1 1 61
<4> 04 000 00 0 0 0 0 0 1 1 69
<4> 05 0FF 0F 1 1 0 0 0 1 1 71
<4> 06 000 00 0 0 0 0 0 1 1 79
<4> 07 000 00 0 0 0 0 0 1 1 81
<4> 08 000 00 0 0 0 0 0 1 1 89
<4> 09 0FF 0F 1 1 0 0 0 1 1 91
<4> 0a 0FF 0F 1 1 0 0 0 1 1 99
<4> 0b 0FF 0F 1 1 0 0 0 1 1 A1
<4> 0c 000 00 0 0 0 0 0 1 1 A9
<4> 0d 000 00 1 0 0 0 0 0 0 00
<4> 0e 000 00 0 0 0 0 0 1 1 B1
<4> 0f 0FF 0F 1 1 0 0 0 1 1 B9
<4> 10 000 00 1 0 0 0 0 0 0 00
<4> 11 000 00 1 0 0 0 0 0 0 00
<4> 12 000 00 1 0 0 0 0 0 0 00
<4> 13 000 00 1 0 0 0 0 0 0 00
<4> 14 000 00 1 0 0 0 0 0 0 00
<4> 15 000 00 1 0 0 0 0 0 0 00
<4> 16 000 00 1 0 0 0 0 0 0 00
<4> 17 000 00 1 0 0 0 0 0 0 00
<4> 18 000 00 1 0 0 0 0 0 0 00
<4> 19 000 00 1 0 0 0 0 0 0 00
<4> 1a 000 00 1 0 0 0 0 0 0 00
<4> 1b 000 00 1 0 0 0 0 0 0 00
<4> 1c 000 00 1 0 0 0 0 0 0 00
<4> 1d 000 00 1 0 0 0 0 0 0 00
<4> 1e 000 00 1 0 0 0 0 0 0 00
<4> 1f 000 00 1 0 0 0 0 0 0 00
<7>IRQ to pin mappings:
<7>IRQ0 -> 2
<7>IRQ1 -> 1
<7>IRQ3 -> 3
<7>IRQ4 -> 4
<7>IRQ5 -> 5
<7>IRQ6 -> 6
<7>IRQ7 -> 7
<7>IRQ8 -> 8
<7>IRQ9 -> 9
<7>IRQ10 -> 10
<7>IRQ11 -> 11
<7>IRQ12 -> 12
<7>IRQ13 -> 13
<7>IRQ14 -> 14
<7>IRQ15 -> 15
<4>.................................... done.
<4>PCI: PCI BIOS revision 2.10 entry at 0xfd9fc
-
Linux SMP list: FIRST see FAQ at http://www.irisa.fr/prive/mentre/smp-faq/
To Unsubscribe: send "unsubscribe linux-smp" to [EMAIL PROTECTED]
