i had the same problem once. My modem used the two outer pins of the rj plug. Connecting the two middle wires gave me dial-tone on phone (connected to modem) but the modem didn't detect it. Do you hear the dial tone on the modem speaker with the atx1dt????? command ? (enable it with atm1l3) Serge -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Jean-Michel Rouet Sent: mardi 2 mars 1999 13:51 To: [EMAIL PROTECTED] Subject: modem saying "no dial tone" Hi, I've been given an old internal modem (9600 bps) to be plugged on an ISA slot. I've set it up into my dual PPro (Supermicro P6-DNF 440FX Natoma) but unfortunately I can only communicate with my modem (using AT commands) but I can't have the line. "ATZ" replies "OK" "ATDT123456" replies "NO DIAL TONE" "ATX1DT123455" replies "NO CARRIER" I've checked the phone line ! it's working ok. The modem is connected to the wall socket via the "LINE" connector (at the backside of the modem card), and I've plugged a phone on the "PHONE" connector of the modem. On the phone I can hear the dial tone. Anyway, the modem doesn't seem to recognize it. Is there a problem using a smp motherboard ? JM -- Jean-Michel Rouet (thesard Dpt ITI) | Tel : +33 298 001 057 ENST de Bretagne | email : [EMAIL PROTECTED] 29285 Brest Cedex | France | http://www-iti.enst-bretagne.fr/~rouet/ - Linux SMP list: FIRST see FAQ at http://www.irisa.fr/prive/mentre/smp-faq/ To Unsubscribe: send "unsubscribe linux-smp" to [EMAIL PROTECTED] - Linux SMP list: FIRST see FAQ at http://www.irisa.fr/prive/mentre/smp-faq/ To Unsubscribe: send "unsubscribe linux-smp" to [EMAIL PROTECTED]
