Dear List,
To try to get more data I put the lm_sensors package on the system and
got the following results:
cat /proc/sensors
Vcore: +2.06V (min = +1.80V, max = +2.20V)
Vcore2: +2.04V (min = +1.80V, max = +2.20V)
+3.3V: +3.31V (min = +2.97V, max = +3.63V)
+5V: +5.10V (min = +4.48V, max = +5.48V)
+12V: +12.22V (min = +10.82V, max = +13.19V)
-12V: -12.07V (min = -10.79V, max = -13.18V)
-5V: -5.00V (min = -4.50V, max = -5.49V)
Fan1: 4245 rpm (min=3000 rpm)
Fan2: 4299 rpm (min=3000 rpm)
Fan3: 0 rpm (min=3000 rpm) ALARM (not connected?)
Mainboard: 35 C (min = 0 C, max = 50 C)
Other alarms: (none)
VID: 2.00
Temp-1: +37.0 C (Tos = +50.0 C, Thyst = +45.0 C)
Temp-2: +32720.0 C (Tos = +80.0 C, Thyst = +75.0 C)
Everything appears nominal except Temp-2, which looks a bit on the
extreme side. Should I be worried that I have a heat problem? I don't
have much experience with lm_sensors, but the os and hyst temperatures
on sensor two look way out of line. The first number looks like a bug
in the lm_sensors code, since I doubt that I have any raw plasma in the
box (:-).
rgb
Robert G. Brown http://www.phy.duke.edu/~rgb/
Duke University Dept. of Physics, Box 90305
Durham, N.C. 27708-0305
Phone: 1-919-660-2567 Fax: 919-660-2525 email:[EMAIL PROTECTED]
