Hi.
Has anyone tried to run Linux 2.2.5 on ProLiant 6500 Quad Xeon server?
ProLiant 6500 has 2 64bit PCI busses (bus#: 0 and 4) and two
EtherExpressPRO100 NIC via DC21154 PCI-to-PCI bridge, and new(?) APIC.
IRQs for the EtherExpressPRO100 NICs and IRQs for PCI cards on PCI bus
#4 are not re-allocated correctly.
Are there any methods to use IRQs allocated by BIOS or allocate
manually?
Now we use linux 2.2.1 with 450NX bus scan patch and
skip_ioapic_setup=1 in smp.c.
Thank you for any help.
Here are boot messages.
==============================
Linux version 2.2.5-ac6 ([EMAIL PROTECTED]) (gcc version 2.7.2.3) #4 SMP
Mon Apr 12 16:36:10 JST 1999
Warning only 960MB will be used.
Intel MultiProcessor Specification v1.4
Virtual Wire compatibility mode.
OEM ID: COMPAQ Product ID: PROLIANT APIC at: 0xFEE00000
Processor #3 Pentium(tm) Pro APIC version 16
Processor #0 Pentium(tm) Pro APIC version 16
Processor #1 Pentium(tm) Pro APIC version 16
Processor #2 Pentium(tm) Pro APIC version 16
I/O APIC #8 Version 17 at 0xFEC00000.
Processors: 4
mapped APIC to ffffe000 (fee00000)
mapped IOAPIC to ffffd000 (fec00000)
Detected 449865185 Hz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 448.92 BogoMIPS
Memory: 971696k/983040k available (944k kernel code, 420k reserved, 9912k data, 68k
init)
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.26 (19981001) Richard Gooch ([EMAIL PROTECTED])
per-CPU timeslice cutoff: 200.38 usecs.
CPU3: Intel Pentium II (Deschutes) stepping 03
calibrating APIC timer ...
..... CPU clock speed is 449.8744 MHz.
..... system bus clock speed is 99.9718 MHz.
Booting processor 0 eip 2000
Calibrating delay loop... 448.92 BogoMIPS
OK.
CPU0: Intel Pentium II (Deschutes) stepping 03
Booting processor 1 eip 2000
Calibrating delay loop... 448.92 BogoMIPS
OK.
CPU1: Intel Pentium II (Deschutes) stepping 03
Booting processor 2 eip 2000
Calibrating delay loop... 448.92 BogoMIPS
OK.
CPU2: Intel Pentium II (Deschutes) stepping 03
Total of 4 processors activated (1795.69 BogoMIPS).
enabling symmetric IO mode... ...done.
ENABLING IO-APIC IRQs
init IO_APIC IRQs
IO-APIC pin 0, 5, 9, 10, 11, 15, 24WARNING: ASSIGN_IRQ_VECTOR wrapped back to 52
, 32, 33, 34 not connected.
number of MP IRQ sources: 38.
number of IO-APIC registers: 35.
testing the IO APIC.......................
.... register #00: 00000000
....... : physical APIC id: 00
.... register #01: 00220011
....... : max redirection entries: 0022
WARNING: unexpected IO-APIC, please mail
to [EMAIL PROTECTED]
....... : IO APIC version: 0011
.... register #02: 00000000
....... : arbitration: 00
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 000 00 0 0 0 0 0 1 1 59
02 0FF 0F 0 0 0 0 0 1 1 51
03 000 00 0 0 0 0 0 1 1 61
04 000 00 0 0 0 0 0 1 1 69
05 000 00 1 0 0 0 0 0 0 00
06 000 00 0 0 0 0 0 1 1 71
07 000 00 0 0 0 0 0 1 1 79
08 000 00 0 0 0 0 0 1 1 81
09 000 00 1 0 0 0 0 0 0 00
0a 000 00 1 0 0 0 0 0 0 00
0b 000 00 1 0 0 0 0 0 0 00
0c 000 00 0 0 0 0 0 1 1 89
0d 000 00 1 0 0 0 0 0 0 00
0e 000 00 0 0 0 0 0 1 1 91
0f 000 00 1 0 0 0 0 0 0 00
10 0FF 0F 1 1 0 1 0 1 1 99
11 0FF 0F 1 1 0 1 0 1 1 A1
12 0FF 0F 1 1 0 1 0 1 1 A9
13 0FF 0F 1 1 0 1 0 1 1 B1
14 0FF 0F 1 1 0 1 0 1 1 B9
15 0FF 0F 1 1 0 1 0 1 1 C1
16 0FF 0F 1 1 0 1 0 1 1 C9
17 0FF 0F 1 1 0 1 0 1 1 D1
18 000 00 1 0 0 0 0 0 0 00
19 0FF 0F 1 1 0 1 0 1 1 D9
1a 0FF 0F 1 1 0 1 0 1 1 E1
1b 0FF 0F 1 1 0 1 0 1 1 E9
1c 0FF 0F 1 1 0 1 0 1 1 F1
1d 0FF 0F 1 1 0 1 0 1 1 F9
1e 0FF 0F 1 1 0 1 0 1 1 52
1f 0FF 0F 1 1 0 1 0 1 1 5A
20 000 00 1 0 0 0 0 0 0 00
21 000 00 1 0 0 0 0 0 0 00
22 000 00 1 0 0 0 0 0 0 00
.................................... done.
mtrr: your CPUs had inconsistent fixed MTRR settings
mtrr: probably your BIOS does not setup all CPUs
PCI: PCI BIOS revision 2.10 entry at 0xf0084
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: 00:80 [8086/84ca]: Scanning peer host bridges
PCI->APIC IRQ transform: (B0,I11,P0) -> 27
PCI->APIC IRQ transform: (B0,I13,P0) -> 26
PCI->APIC IRQ transform: (B0,I13,P1) -> 25
PCI: Device 00:78 not found by BIOS
PCI: Device 00:80 not found by BIOS
PCI: Device 00:90 not found by BIOS
PCI: Device 00:a0 not found by BIOS
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
Starting kswapd v 1.5
Detected PS/2 Mouse Port.
Serial driver version 4.27 with no serial options enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
pty: 256 Unix98 ptys configured
PIIX4: IDE controller on PCI bus 00 dev 79
PIIX4: not 100ative mode: will probe irqs later
ide0: BM-DMA at 0x2c00-0x2c07, BIOS settings: hda:pio, hdb:pio
hda: CD-ROM CDU701-Q, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: ATAPI 14X CD-ROM drive, 128kB Cache
Uniform CDROM driver Revision: 2.54
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
ncr53c8xx: at PCI bus 0, device 13, function 0
ncr53c8xx: 53c876 detected
ncr53c8xx: at PCI bus 0, device 13, function 1
ncr53c8xx: 53c876 detected
ncr53c876-0: rev=0x14, base=0xc6bd0000, io_port=0x2000, irq=26
ncr53c876-0: ID 7, Fast-20, Parity Checking
ncr53c876-0: on-chip RAM at 0xc6bc0000
ncr53c876-0: restart (scsi reset).
ncr53c876-0: Downloading SCSI SCRIPTS.
ncr53c876-1: rev=0x14, base=0xc6bb0000, io_port=0x2400, irq=25
ncr53c876-1: NCR clock is 40218KHz, 40218KHz
ncr53c876-1: ID 7, Fast-20, Parity Checking
ncr53c876-1: on-chip RAM at 0xc6ba0000
ncr53c876-1: restart (scsi reset).
ncr53c876-1: Downloading SCSI SCRIPTS.
scsi0 : ncr53c8xx - revision 3.1h
scsi1 : ncr53c8xx - revision 3.1h
scsi : 2 hosts.
ncr53c876-0-<0,*>: FAST-20 WIDE SCSI 40.0 MB/s (50 ns, offset 15)
Vendor: COMPAQ Model: DGHS09Y Rev: 01C0
Type: Direct-Access ANSI SCSI revision: 03
Detected scsi disk sda at scsi0, channel 0, id 0, lun 0
ncr53c876-0-<0,0>: tagged command queue depth set to 4
scsi : detected 1 SCSI disk total.
SCSI device sda: hdwr sector= 512 bytes. Sectors= 17773500 [8678 MB] [8.7 GB]
eth0: OEM i82557/i82558 10/100 Ethernet at 0x3000, 00:08:C7:91:74:86, IRQ 11.
Board assembly 009542-001, Physical connectors present: RJ45
Primary interface chip i82555 PHY #1.
General self-test: passed.
Serial sub-system self-test: passed.
Internal registers self-test: passed.
ROM checksum self-test: passed (0x24c9f043).
Receiver lock-up workaround activated.
eth1: OEM i82557/i82558 10/100 Ethernet at 0x3020, 00:08:C7:91:74:87, IRQ 15.
Board assembly 009542-001, Physical connectors present: RJ45
Primary interface chip i82555 PHY #1.
General self-test: passed.
Serial sub-system self-test: passed.
Internal registers self-test: passed.
ROM checksum self-test: passed (0x24c9f043).
Receiver lock-up workaround activated.
Partition check:
sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 >
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 68k freed
Adding Swap: 130748k swap-space (priority -1)
==============================
-----
Shinji Sumimoto E-Mail: [EMAIL PROTECTED]
Real World Computing Partnership, Japan.
-
Linux SMP list: FIRST see FAQ at http://www.irisa.fr/prive/mentre/smp-faq/
To Unsubscribe: send "unsubscribe linux-smp" to [EMAIL PROTECTED]
