3) #1 SMP Thu Apr 15 16:57:50 CEST 1999
Intel MultiProcessor Specification v1.4
Virtual Wire compatibility mode.
OEM ID: COMPAQ Product ID: PROLIANT APIC at: 0xFEE00000
Processor #3 Pentium(tm) Pro APIC version 16
Processor #0 Pentium(tm) Pro APIC version 16
Processor #1 Pentium(tm) Pro APIC version 16
Processor #2 Pentium(tm) Pro APIC version 16
I/O APIC #8 Version 17 at 0xFEC00000.
Processors: 4
mapped APIC to ffffe000 (fee00000)
mapped IOAPIC to ffffd000 (fec00000)
Detected 399887834 Hz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 398.95 BogoMIPS
Memory: 127748k/131072k available (1276k kernel code, 420k reserved, 1560k data, 68k
init)
VFS: Diskquotas version dquot_6.4.0 initialized
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.26 (19981001) Richard Gooch ([EMAIL PROTECTED])
per-CPU timeslice cutoff: 100.22 usecs.
CPU3: Intel Pentium II (Deschutes) stepping 03
calibrating APIC timer ...
..... CPU clock speed is 399.8733 MHz.
..... system bus clock speed is 99.9681 MHz.
Booting processor 0 eip 2000
Calibrating delay loop... 399.77 BogoMIPS
OK.
CPU0: Intel Pentium II (Deschutes) stepping 03
Booting processor 1 eip 2000
Calibrating delay loop... 399.77 BogoMIPS
OK.
CPU1: Intel Pentium II (Deschutes) stepping 03
Booting processor 2 eip 2000
Calibrating delay loop... 399.77 BogoMIPS
OK.
CPU2: Intel Pentium II (Deschutes) stepping 03
Total of 4 processors activated (1598.26 BogoMIPS).
enabling symmetric IO mode... ...done.
ENABLING IO-APIC IRQs
init IO_APIC IRQs
IO-APIC pin 0, 5, 9, 10WARNING: ASSIGN_IRQ_VECTOR wrapped back to 52
, 32, 33, 34 not connected.
number of MP IRQ sources: 42.
number of IO-APIC registers: 35.
testing the IO APIC.......................
.... register #00: 00000000
....... : physical APIC id: 00
.... register #01: 00220011
....... : max redirection entries: 0022
WARNING: unexpected IO-APIC, please mail
to [EMAIL PROTECTED]
....... : IO APIC version: 0011
.... register #02: 00000000
....... : arbitration: 00
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 000 00 0 0 0 0 0 1 1 59
02 0FF 0F 0 0 0 0 0 1 1 51
03 000 00 0 0 0 0 0 1 1 61
04 000 00 0 0 0 0 0 1 1 69
05 000 00 1 0 0 0 0 0 0 00
06 000 00 0 0 0 0 0 1 1 71
07 000 00 0 0 0 0 0 1 1 79
08 000 00 0 0 0 0 0 1 1 81
09 000 00 1 0 0 0 0 0 0 00
0a 000 00 1 0 0 0 0 0 0 00
0b 000 00 0 0 0 0 0 1 1 89
0c 000 00 0 0 0 0 0 1 1 91
0d 000 00 1 0 0 0 0 0 0 00
0e 000 00 0 0 0 0 0 1 1 99
0f 000 00 0 0 0 0 0 1 1 A1
10 0FF 0F 1 1 0 1 0 1 1 A9
11 0FF 0F 1 1 0 1 0 1 1 B1
12 0FF 0F 1 1 0 1 0 1 1 B9
13 0FF 0F 1 1 0 1 0 1 1 C1
14 0FF 0F 1 1 0 1 0 1 1 C9
15 0FF 0F 1 1 0 1 0 1 1 D1
16 0FF 0F 1 1 0 1 0 1 1 D9
17 0FF 0F 1 1 0 1 0 1 1 E1
18 0FF 0F 1 1 0 1 0 1 1 E9
19 0FF 0F 1 1 0 1 0 1 1 F1
1a 0FF 0F 1 1 0 1 0 1 1 F9
1b 0FF 0F 1 1 0 1 0 1 1 52
1c 0FF 0F 1 1 0 1 0 1 1 5A
1d 0FF 0F 1 1 0 1 0 1 1 62
1e 0FF 0F 1 1 0 1 0 1 1 6A
1f 0FF 0F 1 1 0 1 0 1 1 72
20 000 00 1 0 0 0 0 0 0 00
21 000 00 1 0 0 0 0 0 0 00
22 000 00 1 0 0 0 0 0 0 00
IRQ to pin mappings:
IRQ0 -> 2
IRQ1 -> 1
IRQ3 -> 3
IRQ4 -> 4
IRQ6 -> 6
IRQ7 -> 7
IRQ8 -> 8
IRQ11 -> 11
IRQ12 -> 12
IRQ13 -> 13
IRQ14 -> 14
IRQ15 -> 15
IRQ16 -> 16
IRQ17 -> 17
IRQ18 -> 18
IRQ19 -> 19
IRQ20 -> 20
IRQ21 -> 21
IRQ22 -> 22
IRQ23 -> 23
IRQ24 -> 24
IRQ25 -> 25
IRQ26 -> 26
IRQ27 -> 27
IRQ28 -> 28
IRQ29 -> 29
IRQ30 -> 30
IRQ31 -> 31
.................................... done.
mtrr: your CPUs had inconsistent fixed MTRR settings
mtrr: probably your BIOS does not setup all CPUs
PCI: PCI BIOS revision 2.10 entry at 0xf0080
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: 00:80 [8086/84ca]: Scanning peer host bridges
PCI->APIC IRQ transform: (B0,I13,P0) -> 26
PCI->APIC IRQ transform: (B0,I13,P1) -> 25
PCI: Device 00:78 not found by BIOS
PCI: Device 00:80 not found by BIOS
PCI: Device 00:90 not found by BIOS
PCI: Device 00:98 not found by BIOS
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
NET4: AppleTalk 0.18 for Linux NET4.0
Starting kswapd v 1.5
Detected PS/2 Mouse Port.
Serial driver version 4.27 with no serial options enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
pty: 256 Unix98 ptys configured
loop: registered device at major 7
PIIX4: IDE controller on PCI bus 00 dev 79
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x2c00-0x2c07, BIOS settings: hda:pio, hdb:pio
hda: CD-ROM CDU611-Q, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: ATAPI 10X CD-ROM drive, 256kB Cache
Uniform CDROM driver Revision: 2.54
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
ncr53c8xx: at PCI bus 0, device 13, function 0
ncr53c8xx: 53c876 detected
ncr53c8xx: at PCI bus 0, device 13, function 1
ncr53c8xx: 53c876 detected
ncr53c876-0: rev=0x14, base=0xc6ee0000, io_port=0x2000, irq=26
ncr53c876-0: ID 7, Fast-20, Parity Checking
ncr53c876-0: on-chip RAM at 0xc6ed0000
ncr53c876-0: restart (scsi reset).
ncr53c876-0: Downloading SCSI SCRIPTS.
ncr53c876-1: rev=0x14, base=0xc6ec0000, io_port=0x2400, irq=25
ncr53c876-1: NCR clock is 40218KHz, 40218KHz
ncr53c876-1: ID 7, Fast-20, Parity Checking
ncr53c876-1: on-chip RAM at 0xc6eb0000
ncr53c876-1: restart (scsi reset).
ncr53c876-1: Downloading SCSI SCRIPTS.
scsi0 : ncr53c8xx - revision 3.1h
scsi1 : ncr53c8xx - revision 3.1h
scsi : 2 hosts.
ncr53c876-0-<0,*>: FAST-20 WIDE SCSI 40.0 MB/s (50 ns, offset 15)
Vendor: COMPAQ Model: WDE9100S Rev: 1.40
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sda at scsi0, channel 0, id 0, lun 0
ncr53c876-0-<1,*>: FAST-20 WIDE SCSI 40.0 MB/s (50 ns, offset 15)
Vendor: COMPAQ Model: WDE9100S Rev: 1.40
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sdb at scsi0, channel 0, id 1, lun 0
ncr53c876-0-<0,0>: tagged command queue depth set to 4
ncr53c876-0-<1,0>: tagged command queue depth set to 4
scsi : detected 2 SCSI disks total.
SCSI device sda: hdwr sector= 512 bytes. Sectors= 17773500 [8678 MB] [8.7 GB]
SCSI device sdb: hdwr sector= 512 bytes. Sectors= 17773500 [8678 MB] [8.7 GB]
PPP: version 2.3.3 (demand dialling)
TCP compression code copyright 1989 Regents of the University of California
PPP line discipline registered.
TLAN 1.0: eth0 irq= 5 io=3000, Compaq Netelligent 10/100 TX PCI UTP, Rev. 16
Partition check:
sda: sda1 sda2 sda3 sda4
sdb: sdb1 sdb2 sdb3 sdb4
NTFS version 990102
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 68k freed
Adding Swap: 130748k swap-space (priority -1)
-
Linux SMP list: FIRST see FAQ at http://www.irisa.fr/prive/mentre/smp-faq/
To Unsubscribe: send "unsubscribe linux-smp" to [EMAIL PROTECTED]
