I installed Redhat 5.2 on a Compaq ProLiant 6500 4-way Xeon 450 and I'm
getting the attached bootmessages.
They appear either with and without MTTR compiled in.
Any hints?
Thanx.
--
Markus Doehr
IT Admin
AUBI Baubeschlaege GmbH
Tel.: +49 6503 917 152
Fax : +49 6503 917 190
[EMAIL PROTECTED]
Linux version 2.2.9 (root@aubir3p1) (gcc version 2.7.2.3) #5 SMP Sat Jun 12 03:43:16
/etc/localtime 1999
Warning only 960MB will be used.
Intel MultiProcessor Specification v1.4
Virtual Wire compatibility mode.
OEM ID: COMPAQ Product ID: PROLIANT APIC at: 0xFEE00000
Processor #3 Pentium(tm) Pro APIC version 16
Processor #0 Pentium(tm) Pro APIC version 16
Processor #1 Pentium(tm) Pro APIC version 16
Processor #2 Pentium(tm) Pro APIC version 16
I/O APIC #8 Version 17 at 0xFEC00000.
Processors: 4
mapped APIC to ffffe000 (fee00000)
mapped IOAPIC to ffffd000 (fec00000)
Detected 449898926 Hz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 448.92 BogoMIPS
Memory: 971496k/983040k available (1028k kernel code, 416k reserved, 10052k data, 48k
init)
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
per-CPU timeslice cutoff: 100.19 usecs.
CPU3: Intel Pentium II (Deschutes) stepping 03
calibrating APIC timer ...
..... CPU clock speed is 449.8798 MHz.
..... system bus clock speed is 99.9731 MHz.
Booting processor 0 eip 2000
Calibrating delay loop... 448.92 BogoMIPS
OK.
CPU0: Intel Pentium II (Deschutes) stepping 03
Booting processor 1 eip 2000
Calibrating delay loop... 448.92 BogoMIPS
OK.
CPU1: Intel Pentium II (Deschutes) stepping 03
Booting processor 2 eip 2000
Calibrating delay loop... 448.92 BogoMIPS
OK.
CPU2: Intel Pentium II (Deschutes) stepping 03
Total of 4 processors activated (1795.69 BogoMIPS).
enabling symmetric IO mode... ...done.
ENABLING IO-APIC IRQs
init IO_APIC IRQs
IO-APIC pin 0, 5, 9, 10, 11, 15, 24WARNING: ASSIGN_IRQ_VECTOR wrapped back to 52
, 32, 33, 34 not connected.
number of MP IRQ sources: 38.
number of IO-APIC registers: 35.
testing the IO APIC.......................
.... register #00: 00000000
....... : physical APIC id: 00
.... register #01: 00220011
....... : max redirection entries: 0022
WARNING: unexpected IO-APIC, please mail
to [EMAIL PROTECTED]
....... : IO APIC version: 0011
.... register #02: 00000000
....... : arbitration: 00
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 000 00 0 0 0 0 0 1 1 59
02 0FF 0F 0 0 0 0 0 1 1 51
03 000 00 0 0 0 0 0 1 1 61
04 000 00 0 0 0 0 0 1 1 69
05 000 00 1 0 0 0 0 0 0 00
06 000 00 0 0 0 0 0 1 1 71
07 000 00 0 0 0 0 0 1 1 79
08 000 00 0 0 0 0 0 1 1 81
09 000 00 1 0 0 0 0 0 0 00
0a 000 00 1 0 0 0 0 0 0 00
0b 000 00 1 0 0 0 0 0 0 00
0c 000 00 0 0 0 0 0 1 1 89
0d 000 00 1 0 0 0 0 0 0 00
0e 000 00 0 0 0 0 0 1 1 91
0f 000 00 1 0 0 0 0 0 0 00
10 0FF 0F 1 1 0 1 0 1 1 99
11 0FF 0F 1 1 0 1 0 1 1 A1
12 0FF 0F 1 1 0 1 0 1 1 A9
13 0FF 0F 1 1 0 1 0 1 1 B1
14 0FF 0F 1 1 0 1 0 1 1 B9
15 0FF 0F 1 1 0 1 0 1 1 C1
16 0FF 0F 1 1 0 1 0 1 1 C9
17 0FF 0F 1 1 0 1 0 1 1 D1
18 000 00 1 0 0 0 0 0 0 00
19 0FF 0F 1 1 0 1 0 1 1 D9
1a 0FF 0F 1 1 0 1 0 1 1 E1
1b 0FF 0F 1 1 0 1 0 1 1 E9
1c 0FF 0F 1 1 0 1 0 1 1 F1
1d 0FF 0F 1 1 0 1 0 1 1 F9
1e 0FF 0F 1 1 0 1 0 1 1 52
1f 0FF 0F 1 1 0 1 0 1 1 5A
20 000 00 1 0 0 0 0 0 0 00
21 000 00 1 0 0 0 0 0 0 00
22 000 00 1 0 0 0 0 0 0 00
IRQ to pin mappings:
IRQ0 -> 2
IRQ1 -> 1
IRQ3 -> 3
IRQ4 -> 4
IRQ6 -> 6
IRQ7 -> 7
IRQ8 -> 8
IRQ12 -> 12
IRQ13 -> 13
IRQ14 -> 14
IRQ16 -> 16
IRQ17 -> 17
IRQ18 -> 18
IRQ19 -> 19
IRQ20 -> 20
IRQ21 -> 21
IRQ22 -> 22
IRQ23 -> 23
IRQ25 -> 25
IRQ26 -> 26
IRQ27 -> 27
IRQ28 -> 28
IRQ29 -> 29
IRQ30 -> 30
IRQ31 -> 31
.................................... done.
PCI: PCI BIOS revision 2.10 entry at 0xf0080
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: 00:80 [8086/84ca]: Scanning peer host bridges
PCI->APIC IRQ transform: (B0,I11,P0) -> 27
PCI->APIC IRQ transform: (B0,I13,P0) -> 26
PCI->APIC IRQ transform: (B0,I13,P1) -> 25
PCI: Device 00:78 not found by BIOS
PCI: Device 00:80 not found by BIOS
PCI: Device 00:90 not found by BIOS
PCI: Device 00:a0 not found by BIOS
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
Starting kswapd v 1.5
Detected PS/2 Mouse Port.
Serial driver version 4.27 with no serial options enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
pty: 256 Unix98 ptys configured
PIIX4: IDE controller on PCI bus 00 dev 79
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x2c00-0x2c07, BIOS settings: hda:pio, hdb:pio
hda: CD-ROM CDU701-Q, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: ATAPI 14X CD-ROM drive, 128kB Cache
Uniform CDROM driver Revision: 2.55
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
scsi : 0 hosts.
scsi : detected total.
Compaq SMART2 Driver (v 1.0.1)
Found 1 controller(s)
Finding drives on ida0 (Smart Array 3200)
ida/c0d0: blksz=512 nr_blks=4097952
ida/c0d1: blksz=512 nr_blks=106626720
ida/c0d2: blksz=512 nr_blks=13668000
eth0: OEM i82557/i82558 10/100 Ethernet at 0x4000, 00:08:C7:91:B0:BC, IRQ 10.
Board assembly 009542-001, Physical connectors present: RJ45
Primary interface chip i82555 PHY #1.
General self-test: passed.
Serial sub-system self-test: passed.
Internal registers self-test: passed.
ROM checksum self-test: passed (0x24c9f043).
Receiver lock-up workaround activated.
eth1: OEM i82557/i82558 10/100 Ethernet at 0x4020, 00:08:C7:91:B0:BD, IRQ 10.
Board assembly 009542-001, Physical connectors present: RJ45
Primary interface chip i82555 PHY #1.
General self-test: passed.
Serial sub-system self-test: passed.
Internal registers self-test: passed.
ROM checksum self-test: passed (0x24c9f043).
Receiver lock-up workaround activated.
Partition check:
ida/c0d0: p1 p2 p3
ida/c0d1: unknown partition table
ida/c0d2: unknown partition table
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 48k freed
VFS: Disk change detected on device ide0(3,0)
ISO 9660 Extensions: RRIP_1991A
Linux version 2.2.9 (root@aubir3p1) (gcc version 2.7.2.3) #6 SMP Sat Jun 12 04:03:49
/etc/localtime 1999
Warning only 960MB will be used.
Intel MultiProcessor Specification v1.4
Virtual Wire compatibility mode.
OEM ID: COMPAQ Product ID: PROLIANT APIC at: 0xFEE00000
Processor #3 Pentium(tm) Pro APIC version 16
Processor #0 Pentium(tm) Pro APIC version 16
Processor #1 Pentium(tm) Pro APIC version 16
Processor #2 Pentium(tm) Pro APIC version 16
I/O APIC #8 Version 17 at 0xFEC00000.
Processors: 4
mapped APIC to ffffe000 (fee00000)
mapped IOAPIC to ffffd000 (fec00000)
Detected 449892941 Hz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 448.92 BogoMIPS
Memory: 971488k/983040k available (1036k kernel code, 416k reserved, 10052k data, 48k
init)
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.34 (19990310) Richard Gooch ([EMAIL PROTECTED])
per-CPU timeslice cutoff: 100.19 usecs.
CPU3: Intel Pentium II (Deschutes) stepping 03
calibrating APIC timer ...
..... CPU clock speed is 449.8798 MHz.
..... system bus clock speed is 99.9731 MHz.
Booting processor 0 eip 2000
Calibrating delay loop... 448.92 BogoMIPS
OK.
CPU0: Intel Pentium II (Deschutes) stepping 03
Booting processor 1 eip 2000
Calibrating delay loop... 448.92 BogoMIPS
OK.
CPU1: Intel Pentium II (Deschutes) stepping 03
Booting processor 2 eip 2000
Calibrating delay loop... 448.92 BogoMIPS
OK.
CPU2: Intel Pentium II (Deschutes) stepping 03
Total of 4 processors activated (1795.69 BogoMIPS).
enabling symmetric IO mode... ...done.
ENABLING IO-APIC IRQs
init IO_APIC IRQs
IO-APIC pin 0, 5, 9, 10, 11, 15, 24WARNING: ASSIGN_IRQ_VECTOR wrapped back to 52
, 32, 33, 34 not connected.
number of MP IRQ sources: 38.
number of IO-APIC registers: 35.
testing the IO APIC.......................
.... register #00: 00000000
....... : physical APIC id: 00
.... register #01: 00220011
....... : max redirection entries: 0022
WARNING: unexpected IO-APIC, please mail
to [EMAIL PROTECTED]
....... : IO APIC version: 0011
.... register #02: 00000000
....... : arbitration: 00
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 000 00 0 0 0 0 0 1 1 59
02 0FF 0F 0 0 0 0 0 1 1 51
03 000 00 0 0 0 0 0 1 1 61
04 000 00 0 0 0 0 0 1 1 69
05 000 00 1 0 0 0 0 0 0 00
06 000 00 0 0 0 0 0 1 1 71
07 000 00 0 0 0 0 0 1 1 79
08 000 00 0 0 0 0 0 1 1 81
09 000 00 1 0 0 0 0 0 0 00
0a 000 00 1 0 0 0 0 0 0 00
0b 000 00 1 0 0 0 0 0 0 00
0c 000 00 0 0 0 0 0 1 1 89
0d 000 00 1 0 0 0 0 0 0 00
0e 000 00 0 0 0 0 0 1 1 91
0f 000 00 1 0 0 0 0 0 0 00
10 0FF 0F 1 1 0 1 0 1 1 99
11 0FF 0F 1 1 0 1 0 1 1 A1
12 0FF 0F 1 1 0 1 0 1 1 A9
13 0FF 0F 1 1 0 1 0 1 1 B1
14 0FF 0F 1 1 0 1 0 1 1 B9
15 0FF 0F 1 1 0 1 0 1 1 C1
16 0FF 0F 1 1 0 1 0 1 1 C9
17 0FF 0F 1 1 0 1 0 1 1 D1
18 000 00 1 0 0 0 0 0 0 00
19 0FF 0F 1 1 0 1 0 1 1 D9
1a 0FF 0F 1 1 0 1 0 1 1 E1
1b 0FF 0F 1 1 0 1 0 1 1 E9
1c 0FF 0F 1 1 0 1 0 1 1 F1
1d 0FF 0F 1 1 0 1 0 1 1 F9
1e 0FF 0F 1 1 0 1 0 1 1 52
1f 0FF 0F 1 1 0 1 0 1 1 5A
20 000 00 1 0 0 0 0 0 0 00
21 000 00 1 0 0 0 0 0 0 00
22 000 00 1 0 0 0 0 0 0 00
IRQ to pin mappings:
IRQ0 -> 2
IRQ1 -> 1
IRQ3 -> 3
IRQ4 -> 4
IRQ6 -> 6
IRQ7 -> 7
IRQ8 -> 8
IRQ12 -> 12
IRQ13 -> 13
IRQ14 -> 14
IRQ16 -> 16
IRQ17 -> 17
IRQ18 -> 18
IRQ19 -> 19
IRQ20 -> 20
IRQ21 -> 21
IRQ22 -> 22
IRQ23 -> 23
IRQ25 -> 25
IRQ26 -> 26
IRQ27 -> 27
IRQ28 -> 28
IRQ29 -> 29
IRQ30 -> 30
IRQ31 -> 31
.................................... done.
mtrr: your CPUs had inconsistent fixed MTRR settings
mtrr: probably your BIOS does not setup all CPUs
PCI: PCI BIOS revision 2.10 entry at 0xf0080
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: 00:80 [8086/84ca]: Scanning peer host bridges
PCI->APIC IRQ transform: (B0,I11,P0) -> 27
PCI->APIC IRQ transform: (B0,I13,P0) -> 26
PCI->APIC IRQ transform: (B0,I13,P1) -> 25
PCI: Device 00:78 not found by BIOS
PCI: Device 00:80 not found by BIOS
PCI: Device 00:90 not found by BIOS
PCI: Device 00:a0 not found by BIOS
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
Starting kswapd v 1.5
Detected PS/2 Mouse Port.
Serial driver version 4.27 with no serial options enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
pty: 256 Unix98 ptys configured
PIIX4: IDE controller on PCI bus 00 dev 79
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x2c00-0x2c07, BIOS settings: hda:pio, hdb:pio
hda: CD-ROM CDU701-Q, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: ATAPI 14X CD-ROM drive, 128kB Cache
Uniform CDROM driver Revision: 2.55
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
scsi : 0 hosts.
scsi : detected total.
Compaq SMART2 Driver (v 1.0.1)
Found 1 controller(s)
Finding drives on ida0 (Smart Array 3200)
ida/c0d0: blksz=512 nr_blks=4097952
ida/c0d1: blksz=512 nr_blks=106626720
ida/c0d2: blksz=512 nr_blks=13668000
eth0: OEM i82557/i82558 10/100 Ethernet at 0x4000, 00:08:C7:91:B0:BC, IRQ 10.
Board assembly 009542-001, Physical connectors present: RJ45
Primary interface chip i82555 PHY #1.
General self-test: passed.
Serial sub-system self-test: passed.
Internal registers self-test: passed.
ROM checksum self-test: passed (0x24c9f043).
Receiver lock-up workaround activated.
eth1: OEM i82557/i82558 10/100 Ethernet at 0x4020, 00:08:C7:91:B0:BD, IRQ 10.
Board assembly 009542-001, Physical connectors present: RJ45
Primary interface chip i82555 PHY #1.
General self-test: passed.
Serial sub-system self-test: passed.
Internal registers self-test: passed.
ROM checksum self-test: passed (0x24c9f043).
Receiver lock-up workaround activated.
Partition check:
ida/c0d0: p1 p2 p3
ida/c0d1: unknown partition table
ida/c0d2: unknown partition table
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 48k freed
