Hi,
I got this dmesg from a brand new Compaq 1850R with 2 PIII 500 MHz.
Most kind regards,
Kristian Bjoernskov, <mailto:[EMAIL PROTECTED]>
Novo Nordisk IT, TCC Network - internet.
Phone: +45 4442 3299. Fax: +45 4442 6061
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
Sent: 21. april 1999 13:14
To: [EMAIL PROTECTED]
Subject:
l Wire compatibility mode.
OEM ID: COMPAQ Product ID: PROLIANT APIC at: 0xFEE00000
Processor #1 Pentium(tm) Pro APIC version 16
Processor #0 Pentium(tm) Pro APIC version 16
I/O APIC #8 Version 17 at 0xFEC00000.
Processors: 2
mapped APIC to ffffe000 (fee00000)
mapped IOAPIC to ffffd000 (fec00000)
Detected 498502310 Hz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 496.44 BogoMIPS
Memory: 387192k/393216k available (1044k kernel code, 416k reserved, 4184k
data, 68k init)
VFS: Diskquotas version dquot_6.4.0 initialized
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.26 (19981001) Richard Gooch ([EMAIL PROTECTED])
per-CPU timeslice cutoff: 100.10 usecs.
CPU1: Intel 00/07 stepping 02
calibrating APIC timer ...
..... CPU clock speed is 498.4903 MHz.
..... system bus clock speed is 99.6979 MHz.
Booting processor 0 eip 2000
Calibrating delay loop... 498.07 BogoMIPS
OK.
CPU0: Intel 00/07 stepping 02
Total of 2 processors activated (994.51 BogoMIPS).
enabling symmetric IO mode... ...done.
ENABLING IO-APIC IRQs
init IO_APIC IRQs
IO-APIC pin 0, 5, 10, 11, 15, 24, 25, 26, 27, 32, 33, 34 not connected.
number of MP IRQ sources: 32.
number of IO-APIC registers: 35.
testing the IO APIC.......................
.... register #00: 00000000
....... : physical APIC id: 00
.... register #01: 00220011
....... : max redirection entries: 0022
WARNING: unexpected IO-APIC, please mail
to [EMAIL PROTECTED]
....... : IO APIC version: 0011
.... register #02: 00000000
....... : arbitration: 00
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 000 00 0 0 0 0 0 1 1 59
02 0FF 0F 0 0 0 0 0 1 1 51
03 000 00 0 0 0 0 0 1 1 61
04 000 00 0 0 0 0 0 1 1 69
05 000 00 1 0 0 0 0 0 0 00
06 000 00 0 0 0 0 0 1 1 71
07 000 00 0 0 0 0 0 1 1 79
08 000 00 0 0 0 0 0 1 1 81
09 0FF 0F 1 1 0 0 0 1 1 89
0a 000 00 1 0 0 0 0 0 0 00
0b 000 00 1 0 0 0 0 0 0 00
0c 000 00 0 0 0 0 0 1 1 91
0d 000 00 1 0 0 0 0 0 0 00
0e 000 00 0 0 0 0 0 1 1 99
0f 000 00 1 0 0 0 0 0 0 00
10 0FF 0F 1 1 0 1 0 1 1 A1
11 0FF 0F 1 1 0 1 0 1 1 A9
12 0FF 0F 1 1 0 1 0 1 1 B1
13 0FF 0F 1 1 0 1 0 1 1 B9
14 0FF 0F 1 1 0 1 0 1 1 C1
15 0FF 0F 1 1 0 1 0 1 1 C9
16 0FF 0F 1 1 0 1 0 1 1 D1
17 0FF 0F 1 1 0 1 0 1 1 D9
18 000 00 1 0 0 0 0 0 0 00
19 000 00 1 0 0 0 0 0 0 00
1a 000 00 1 0 0 0 0 0 0 00
1b 000 00 1 0 0 0 0 0 0 00
1c 0FF 0F 1 1 0 1 0 1 1 E1
1d 0FF 0F 1 1 0 1 0 1 1 E9
1e 0FF 0F 1 1 0 1 0 1 1 F1
1f 0FF 0F 1 1 0 1 0 1 1 F9
20 000 00 1 0 0 0 0 0 0 00
21 000 00 1 0 0 0 0 0 0 00
22 000 00 1 0 0 0 0 0 0 00
IRQ to pin mappings:
IRQ0 -> 2
IRQ1 -> 1
IRQ3 -> 3
IRQ4 -> 4
IRQ6 -> 6
IRQ7 -> 7
IRQ8 -> 8
IRQ9 -> 9
IRQ12 -> 12
IRQ13 -> 13
IRQ14 -> 14
IRQ16 -> 16
IRQ17 -> 17
IRQ18 -> 18
IRQ19 -> 19
IRQ20 -> 20
IRQ21 -> 21
IRQ22 -> 22
IRQ23 -> 23
IRQ28 -> 28
IRQ29 -> 29
IRQ30 -> 30
IRQ31 -> 31
.................................... done.
mtrr: your CPUs had inconsistent fixed MTRR settings
mtrr: probably your BIOS does not setup all CPUs
PCI: PCI BIOS revision 2.10 entry at 0xf0084
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI->APIC IRQ transform: (B0,I6,P0) -> 31
PCI->APIC IRQ transform: (B0,I6,P1) -> 30
PCI->APIC IRQ transform: (B0,I7,P0) -> 29
PCI: Assigning I/O space 5800-581f to device 00:a2
PCI: Enabling I/O for device 00:a2
PCI: using PPB(B0,I13,P0) to get irq 17
PCI->APIC IRQ transform: (B1,I0,P0) -> 17
PCI: Device 00:00 not found by BIOS
PCI: Device 00:a0 not found by BIOS
PCI: Device 00:a1 not found by BIOS
PCI: Device 00:a2 not found by BIOS
PCI: Device 00:a3 not found by BIOS
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
Initializing RT netlink socket
Starting kswapd v 1.5
Detected PS/2 Mouse Port.
Serial driver version 4.27 with MANY_PORTS MULTIPORT SHARE_IRQ enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
pty: 256 Unix98 ptys configured
Real Time Clock Driver v1.09
RAM disk driver initialized: 16 RAM disks of 4096K size
PIIX4: IDE controller on PCI bus 00 dev a1
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xf100-0xf107, BIOS settings: hda:pio, hdb:pio
hda: CD-224E, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: ATAPI 24X CD-ROM drive, 512kB Cache
Uniform CDROM driver Revision: 2.54
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
md driver 0.90.0 MAX_MD_DEVS=256, MAX_REAL=12
raid5: measuring checksumming speed
raid5: using high-speed MMX checksum routine
pII_mmx : 1189.863 MB/sec
p5_mmx : 1161.288 MB/sec
8regs : 858.774 MB/sec
32regs : 616.839 MB/sec
using fastest function: pII_mmx (1189.863 MB/sec)
scsi : 0 hosts.
scsi : detected total.
md.c: sizeof(mdp_super_t) = 4096
Partition check:
RAMDISK: Compressed image found at block 0
autodetecting RAID arrays
autorun ...
... autorun DONE.
VFS: Mounted root (ext2 filesystem).
ncr53c8xx: at PCI bus 0, device 6, function 0
ncr53c8xx: 53c876 detected
ncr53c8xx: at PCI bus 0, device 6, function 1
ncr53c8xx: 53c876 detected
ncr53c876-0: rev=0x14, base=0xc6efcf00, io_port=0x2000, irq=31
ncr53c876-0: NCR clock is 40037KHz, 40037KHz
ncr53c876-0: ID 7, Fast-20, Parity Checking
ncr53c876-0: on-chip RAM at 0xc6eff000
ncr53c876-0: restart (scsi reset).
ncr53c876-0: Downloading SCSI SCRIPTS.
ncr53c876-1: rev=0x14, base=0xc6efce00, io_port=0x2400, irq=30
ncr53c876-1: ID 7, Fast-20, Parity Checking
ncr53c876-1: on-chip RAM at 0xc6efe000
ncr53c876-1: restart (scsi reset).
ncr53c876-1: Downloading SCSI SCRIPTS.
scsi0 : ncr53c8xx - revision 3.1h
scsi1 : ncr53c8xx - revision 3.1h
scsi : 2 hosts.
ncr53c876-1-<6,*>: FAST-10 WIDE SCSI 20.0 MB/s (100 ns, offset 15)
Vendor: QUANTUM Model: DLT7000 Rev: 2255
Type: Sequential-Access ANSI SCSI revision: 02
Detected scsi tape st0 at scsi1, channel 0, id 6, lun 0
Compaq SMART2 Driver (v 0.9.9)
Found 1 controller(s)
Finding drives on ida0 (SMART-221)
ida/c0d0: blksz=512 nr_blks=53309280
ida/c0d0: p1 p2 p3 p4 < p5 p6 p7 >
autodetecting RAID arrays
autorun ...
... autorun DONE.
VFS: Mounted root (ext2 filesystem) readonly.
change_root: old root has d_count=1
Trying to unmount old root ... okay
Freeing unused kernel memory: 68k freed
Adding Swap: 514076k swap-space (priority -1)
TLAN driver, v1.0, (C) 1997-8 Caldera, Inc.
TLAN: eth0 irq=29 io=2c00, Compaq Netelligent Integrated 10/100 TX UTP,
Rev. 16
TLAN: eth0: Starting autonegotiation.
Installing knfsd (copyright (C) 1996 [EMAIL PROTECTED]).
nfsd_init: initialized fhcache, entries=256
TLAN: eth0: Autonegotiation complete.
TLAN: eth0: Link active.
-
Linux SMP list: FIRST see FAQ at http://www.irisa.fr/prive/mentre/smp-faq/
To Unsubscribe: send "unsubscribe linux-smp" to [EMAIL PROTECTED]
