I don't now if this is the list to ask questiona like this, but since I
don't know I try.
Problem with Dell Optiplex GXpro dual PPro!
I recently installed an addtional processor into my computer with no
luck.
The machine runs for a few hours and then it locks up with kernel panic.
Does anyone know if this system is supposed to work, if so what must be
done to get it working? My configuration of the machine is
I'm running the kernel 2.2.10
Dual PPro 200 MHz 256kb cache stepping 07 (for both)
192 Mb RAM
Bios revision A09
One Adaptec SCSI 2940UW
One 3Com309 ethernet card
I include the dmesg printout and the error from the kernel when get
locked.
The Message from the kernel when hang is:
----------------------------------------------------
Unable to handle kernel paging request at virtual address 0000dfb4
Current->tss.cr3 = 00101000 %cr3=00101000
*pde = 00000000
Oops = 0002
Cpu = 1
EIP 0010:[< c01079db>]
EFLAGS = 00010246
eax: 00000080 ebx: c009c000 ecx: c000a000 edx: c009c000
esi: 00000000 edi: 00000000 ebp: 00000000 esp: c009dfc0
Process swapper (pid:0 , process nr: 1 stackpage= c009d000
Stack: ....
......
Call trace : [< c0106000>] [<c0100018>] [<c0107c42>]
Code : .....
Kernel panic: Attempted to kill idle task!
-------------------------------------------------------
I checked the SMP web pages and maybe some
***************************************************************
Peter Frodin Phone: +46-46 222 48 29
Theoretical Ecology Fax: +46-46 222 3766
Ecology Building Mobile: 070-469 09 31
Lund University URL: http://www.teorekol.lu.se/~pfrodin
S-223 62 Lund, Sweden Internpost: haemtstaelle 50
Linux version 2.2.10 (root@gauss) (gcc version 2.7.2.3) #5 SMP Mon Jul 5 22:53:51
GMT+1 1999
Intel MultiProcessor Specification v1.4
Virtual Wire compatibility mode.
OEM ID: DELL Product ID: OPTIPLEXGX2 APIC at: 0xFEE00000
Processor #0 Pentium(tm) Pro APIC version 17
Processor #1 Pentium(tm) Pro APIC version 17
I/O APIC #2 Version 17 at 0xFEC00000.
Processors: 2
mapped APIC to ffffe000 (fee00000)
mapped IOAPIC to ffffd000 (fec00000)
Detected 199434895 Hz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 199.07 BogoMIPS
Memory: 192648k/196608k available (1204k kernel code, 420k reserved, 2256k data, 80k
init)
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.35 (19990512) Richard Gooch ([EMAIL PROTECTED])
per-CPU timeslice cutoff: 50.10 usecs.
CPU0: Intel Pentium Pro stepping 07
calibrating APIC timer ...
..... CPU clock speed is 199.4336 MHz.
..... system bus clock speed is 66.4777 MHz.
Booting processor 1 eip 2000
Calibrating delay loop... 199.07 BogoMIPS
OK.
CPU1: Intel Pentium Pro stepping 07
Total of 2 processors activated (398.13 BogoMIPS).
enabling symmetric IO mode... ...done.
ENABLING IO-APIC IRQs
init IO_APIC IRQs
IO-APIC pin 0, 2, 15, 21, 22, 23 not connected.
...trying to set up timer as ExtINT... .. (found pin 0) ... works.
number of MP IRQ sources: 36.
number of IO-APIC registers: 24.
testing the IO APIC.......................
.... register #00: 00000000
....... : physical APIC id: 00
.... register #01: 00170011
....... : max redirection entries: 0017
....... : IO APIC version: 0011
.... register #02: 00000000
....... : arbitration: 00
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 0 0 0 0 0 0 7 51
01 000 00 0 0 0 0 0 1 1 59
02 000 00 1 0 0 0 0 0 0 00
03 000 00 0 0 0 0 0 1 1 61
04 000 00 0 0 0 0 0 1 1 69
05 000 00 0 0 0 0 0 1 1 71
06 000 00 0 0 0 0 0 1 1 79
07 000 00 0 0 0 0 0 1 1 81
08 000 00 0 0 0 0 0 1 1 89
09 000 00 0 0 0 0 0 1 1 91
0a 000 00 0 0 0 0 0 1 1 99
0b 000 00 0 0 0 0 0 1 1 A1
0c 000 00 0 0 0 0 0 1 1 A9
0d 000 00 1 0 0 0 0 0 0 00
0e 000 00 0 0 0 0 0 1 1 B1
0f 000 00 1 0 0 0 0 0 0 00
10 0FF 0F 1 1 0 1 0 1 1 B9
11 0FF 0F 1 1 0 1 0 1 1 C1
12 0FF 0F 1 1 0 1 0 1 1 C9
13 0FF 0F 1 1 0 1 0 1 1 D1
14 000 00 0 0 0 0 0 1 1 D9
15 000 00 1 0 0 0 0 0 0 00
16 000 00 1 0 0 0 0 0 0 00
17 000 00 1 0 0 0 0 0 0 00
IRQ to pin mappings:
IRQ1 -> 1
IRQ3 -> 3
IRQ4 -> 4
IRQ5 -> 5
IRQ6 -> 6
IRQ7 -> 7
IRQ8 -> 8
IRQ9 -> 9
IRQ10 -> 10
IRQ11 -> 11
IRQ12 -> 12
IRQ13 -> 13
IRQ14 -> 14
IRQ15 -> 20
IRQ16 -> 16
IRQ17 -> 17
IRQ18 -> 18
IRQ19 -> 19
.................................... done.
PCI: PCI BIOS revision 2.10 entry at 0xfc71e
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI->APIC IRQ transform: (B0,I16,P0) -> 16
PCI->APIC IRQ transform: (B0,I17,P0) -> 17
PCI->APIC IRQ transform: (B1,I9,P0) -> 19
PCI->APIC IRQ transform: (B1,I9,P1) -> 16
PCI: 00:00 [8086/1237]: Passive release enable (00)
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
Starting kswapd v 1.5
parport0: PC-style at 0x378 [SPP,ECP,ECPPS2]
parport0: detected irq 7; use procfs to enable interrupt-driven operation.
Detected PS/2 Mouse Port.
pty: 256 Unix98 ptys configured
Real Time Clock Driver v1.09
Sound initialization started
<Sound Blaster 16 (4.13)> at 0x220 irq 5 dma 1,5
<Sound Blaster 16> at 0x330 irq 5 dma 0
<Yamaha OPL3> at 0x388
Sound initialization complete
PIIX3: IDE controller on PCI bus 00 dev 69
PIIX3: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:pio
hda: QUANTUM FIREBALL SE4.3A, ATA DISK drive
hdc: NEC CD-ROM DRIVE:282, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: QUANTUM FIREBALL SE4.3A, 4110MB w/80kB Cache, CHS=524/255/63
hdc: ATAPI 8X CD-ROM drive, 128kB Cache
Uniform CDROM driver Revision: 2.55
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
(scsi0) <Adaptec AIC-7895 Ultra SCSI host adapter> found at PCI 9/0
(scsi0) Wide Channel A, SCSI ID=7, 32/255 SCBs
(scsi0) Warning - detected auto-termination
(scsi0) Please verify driver detected settings are correct.
(scsi0) If not, then please properly set the device termination
(scsi0) in the Adaptec SCSI BIOS by hitting CTRL-A when prompted
(scsi0) during machine bootup.
(scsi0) Cables present (Int-50 NO, Int-68 YES, Ext-68 NO)
(scsi0) Downloading sequencer code... 374 instructions downloaded
(scsi1) <Adaptec AIC-7895 Ultra SCSI host adapter> found at PCI 9/1
(scsi1) Narrow Channel B, SCSI ID=7, 32/255 SCBs
(scsi1) Warning - detected auto-termination
(scsi1) Please verify driver detected settings are correct.
(scsi1) If not, then please properly set the device termination
(scsi1) in the Adaptec SCSI BIOS by hitting CTRL-A when prompted
(scsi1) during machine bootup.
(scsi1) Cables present (Int-50 NO, Ext-50 NO)
(scsi1) Downloading sequencer code... 374 instructions downloaded
scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.1.17/3.2.4
<Adaptec AIC-7895 Ultra SCSI host adapter>
scsi1 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.1.17/3.2.4
<Adaptec AIC-7895 Ultra SCSI host adapter>
scsi : 2 hosts.
(scsi0:0:6:0) Synchronous at 40.0 Mbyte/sec, offset 8.
Vendor: IBM Model: DCAS-34330W Rev: S65A
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sda at scsi0, channel 0, id 6, lun 0
scsi : detected 1 SCSI disk total.
SCSI device sda: hdwr sector= 512 bytes. Sectors= 8467200 [4134 MB] [4.1 GB]
3c59x.c:v0.99H 11/17/98 Donald Becker
http://cesdis.gsfc.nasa.gov/linux/drivers/vortex.html
eth0: 3Com 3c905 Boomerang 100baseTx at 0xccc0, 00:10:4b:57:cb:f6, IRQ 17
8K word-wide RAM 3:5 Rx:Tx split, autoselect/MII interface.
MII transceiver found at address 24, status 786d.
Enabling bus-master transmits and whole-frame receives.
Partition check:
sda: sda1 sda2 sda3 sda4
hda: hda1 hda2 hda3 hda4
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 80k freed
Adding Swap: 120480k swap-space (priority -1)
