Hi,
as described in boot.msg I send you this email. What's wrong?
Best regards,
\\|//
(. .)
oOOo-(_)-oOOo
Infogrames Deutschland GmbH
Oliver Schoenwaelder
Manager IT-Services
http://www.infogrames.de
Phone: +49 (0)6103 334147
Fax: +49 (0)6103 334390
---> boot.msg
Inspecting /boot/System.map
Loaded 5995 symbols from /boot/System.map.
Symbols match kernel version 2.2.10.
No module symbols loaded.
klogd 1.3-3, log source = /proc/kmsg started.
<4>Linux version 2.2.10-smp (root@oracle-svr) (gcc version egcs-2.91.66
19990314 (egcs-1.1.2 release)) #27 SMP Mon Jul 19 17:06:23 MEST 1999
<4>Intel MultiProcessor Specification v1.4
<4> Virtual Wire compatibility mode.
<4>OEM ID: COMPAQ Product ID: PROLIANT APIC at: 0xFEE00000
<4>Processor #1 Pentium(tm) Pro APIC version 16
<4>Processor #0 Pentium(tm) Pro APIC version 16
<4>I/O APIC #8 Version 17 at 0xFEC00000.
<4>Processors: 2
<4>mapped APIC to ffffe000 (fee00000)
<4>mapped IOAPIC to ffffd000 (fec00000)
<4>Detected 498866396 Hz processor.
<4>Console: colour VGA+ 80x25
<4>Calibrating delay loop... 498.07 BogoMIPS
<4>Memory: 517532k/524288k available (824k kernel code, 420k reserved, 5472k
data, 40k init)
<6>Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
<6>Checking 'hlt' instruction... OK.
<4>POSIX conformance testing by UNIFIX
<4>mtrr: v1.35 (19990512) Richard Gooch ([EMAIL PROTECTED])
<4>per-CPU timeslice cutoff: 100.17 usecs.
<4>CPU1: Intel 00/07 stepping 02
<4>calibrating APIC timer ...
<4>..... CPU clock speed is 498.8585 MHz.
<4>..... system bus clock speed is 99.7715 MHz.
<4>Booting processor 0 eip 2000
<4>Calibrating delay loop... 498.07 BogoMIPS
<4>OK.
<4>CPU0: Intel 00/07 stepping 02
<6>Total of 2 processors activated (996.15 BogoMIPS).
<4>enabling symmetric IO mode... ...done.
<4>ENABLING IO-APIC IRQs
<4>init IO_APIC IRQs
<4> IO-APIC pin 0, 5, 9, 10, 11, 15, 16, 17, 18, 19, 20, 32, 33, 34 not
connected.
<4>..MP-BIOS bug: 8254 timer not connected to IO-APIC
<4>...trying to set up timer as ExtINT... .. (found pin 0) ... works.
<4>number of MP IRQ sources: 46.
<4>number of IO-APIC registers: 35.
<4>testing the IO APIC.......................
<4>.... register #00: 00000000
<4>....... : physical APIC id: 00
<4>.... register #01: 00220011
<4>....... : max redirection entries: 0022
<4> WARNING: unexpected IO-APIC, please mail
<4> to [EMAIL PROTECTED]
<4>....... : IO APIC version: 0011
<4>.... register #02: 00000000
<4>....... : arbitration: 00
<4>.... IRQ redirection table:
<4> NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
<4> 00 001 01 0 0 0 0 0 0 7 51
<4> 01 000 00 0 0 0 0 0 1 1 59
<4> 02 000 00 0 0 0 0 0 1 1 51
<4> 03 000 00 0 0 0 0 0 1 1 61
<4> 04 000 00 0 0 0 0 0 1 1 69
<4> 05 000 00 1 0 0 0 0 0 0 00
<4> 06 000 00 0 0 0 0 0 1 1 71
<4> 07 000 00 0 0 0 0 0 1 1 79
<4> 08 000 00 0 0 0 0 0 1 1 81
<4> 09 000 00 1 0 0 0 0 0 0 00
<4> 0a 000 00 1 0 0 0 0 0 0 00
<4> 0b 000 00 1 0 0 0 0 0 0 00
<4> 0c 000 00 0 0 0 0 0 1 1 89
<4> 0d 000 00 1 0 0 0 0 0 0 00
<4> 0e 000 00 0 0 0 0 0 1 1 91
<4> 0f 000 00 1 0 0 0 0 0 0 00
<4> 10 000 00 1 0 0 0 0 0 0 00
<4> 11 000 00 1 0 0 0 0 0 0 00
<4> 12 000 00 1 0 0 0 0 0 0 00
<4> 13 000 00 1 0 0 0 0 0 0 00
<4> 14 000 00 1 0 0 0 0 0 0 00
<4> 15 0FF 0F 1 1 0 1 0 1 1 99
<4> 16 0FF 0F 1 1 0 1 0 1 1 A1
<4> 17 0FF 0F 1 1 0 1 0 1 1 A9
<4> 18 0FF 0F 1 1 0 1 0 1 1 B1
<4> 19 0FF 0F 1 1 0 1 0 1 1 B9
<4> 1a 0FF 0F 1 1 0 1 0 1 1 C1
<4> 1b 0FF 0F 1 1 0 1 0 1 1 C9
<4> 1c 0FF 0F 1 1 0 1 0 1 1 D1
<4> 1d 0FF 0F 1 1 0 1 0 1 1 D9
<4> 1e 0FF 0F 1 1 0 1 0 1 1 E1
<4> 1f 0FF 0F 1 1 0 1 0 1 1 E9
<4> 20 000 00 1 0 0 0 0 0 0 00
<4> 21 000 00 1 0 0 0 0 0 0 00
<4> 22 000 00 1 0 0 0 0 0 0 00
<7>IRQ to pin mappings:
<7>IRQ0 -> 2
<7>IRQ1 -> 1
<7>IRQ3 -> 3
<7>IRQ4 -> 4
<7>IRQ6 -> 6
<7>IRQ7 -> 7
<7>IRQ8 -> 8
<7>IRQ12 -> 12
<7>IRQ13 -> 13
<7>IRQ14 -> 14
Kernel logging (proc) stopped.
Kernel log daemon terminating.
-
Linux SMP list: FIRST see FAQ at http://www.irisa.fr/prive/mentre/smp-faq/
To Unsubscribe: send "unsubscribe linux-smp" to [EMAIL PROTECTED]
