Compaq 1600, dual 450, bios set to UnixWare 7. If you need any more info let
me know.
Linux version 2.3.12 (alsobrsp@naiad) (gcc version egcs-2.91.66 Debian
GNU/Linux (egcs-1.1.2 release)) #5 SMP Mon Aug 2 13:42:34 EDT 1999
Intel MultiProcessor Specification v1.4
Virtual Wire compatibility mode.
OEM ID: COMPAQ Product ID: PROLIANT APIC at: 0xFEE00000
Processor #1 Pentium(tm) Pro APIC version 16
Processor #0 Pentium(tm) Pro APIC version 16
I/O APIC #8 Version 17 at 0xFEC00000.
Processors: 2
mapped APIC to ffffe000 (fee00000)
mapped IOAPIC to ffffd000 (fec00000)
Detected 448965348 Hz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 447.28 BogoMIPS
Memory: 256452k/262144k available (1084k kernel code, 424k reserved, 4112k
data, 72k init)
Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes)
Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
per-CPU timeslice cutoff: 100.21 usecs.
CPU1: Intel Pentium II (Deschutes) stepping 02
calibrating APIC timer ...
..... CPU clock speed is 448.9762 MHz.
..... system bus clock speed is 99.7723 MHz.
Booting processor 0 eip 2000
INITIALIZING CPU#0
Calibrating delay loop... 447.28 BogoMIPS
OK.
CPU0: Intel Pentium II (Deschutes) stepping 02
Total of 2 processors activated (894.57 BogoMIPS).
enabling symmetric IO mode... ...done.
ENABLING IO-APIC IRQs
init IO_APIC IRQs
IO-APIC (apicid-pin) 8-0, 8-16, 8-17, 8-18, 8-19, 8-20, 8-21, 8-22, 8-23,
8-24, 8-25, 8-26, 8-27, 8-28, 8-29, 8-30, 8-31, 8-32, 8-33, 8-34 not
connected.
number of MP IRQ sources: 16.
number of IO-APIC #8 registers: 35.
testing the IO APIC.......................
IO APIC #8......
.... register #00: 00000000
....... : physical APIC id: 00
.... register #01: 00220011
....... : max redirection entries: 0022
WARNING: unexpected IO-APIC, please mail
to [EMAIL PROTECTED]
....... : IO APIC version: 0011
.... register #02: 00000000
....... : arbitration: 00
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 000 00 0 0 0 0 0 1 1 59
02 0FF 0F 0 0 0 0 0 1 1 51
03 000 00 0 0 0 0 0 1 1 61
04 000 00 0 0 0 0 0 1 1 69
05 0FF 0F 1 1 0 0 0 1 1 71
06 000 00 0 0 0 0 0 1 1 79
07 000 00 0 0 0 0 0 1 1 81
08 000 00 0 0 0 0 0 1 1 89
09 0FF 0F 1 1 0 0 0 1 1 91
0a 0FF 0F 1 1 0 0 0 1 1 99
0b 0FF 0F 1 1 0 0 0 1 1 A1
0c 000 00 0 0 0 0 0 1 1 A9
0d 000 00 1 0 0 0 0 0 0 00
0e 000 00 0 0 0 0 0 1 1 B1
0f 0FF 0F 1 1 0 0 0 1 1 B9
10 000 00 1 0 0 0 0 0 0 00
11 000 00 1 0 0 0 0 0 0 00
12 000 00 1 0 0 0 0 0 0 00
13 000 00 1 0 0 0 0 0 0 00
14 000 00 1 0 0 0 0 0 0 00
15 000 00 1 0 0 0 0 0 0 00
16 000 00 1 0 0 0 0 0 0 00
17 000 00 1 0 0 0 0 0 0 00
18 000 00 1 0 0 0 0 0 0 00
19 000 00 1 0 0 0 0 0 0 00
1a 000 00 1 0 0 0 0 0 0 00
1b 000 00 1 0 0 0 0 0 0 00
1c 000 00 1 0 0 0 0 0 0 00
1d 000 00 1 0 0 0 0 0 0 00
1e 000 00 1 0 0 0 0 0 0 00
1f 000 00 1 0 0 0 0 0 0 00
20 000 00 1 0 0 0 0 0 0 00
21 000 00 1 0 0 0 0 0 0 00
22 000 00 1 0 0 0 0 0 0 00
IRQ to pin mappings:
IRQ0 -> 2
IRQ1 -> 1
IRQ3 -> 3
IRQ4 -> 4
IRQ5 -> 5
IRQ6 -> 6
IRQ7 -> 7
IRQ8 -> 8
IRQ9 -> 9
IRQ10 -> 10
IRQ11 -> 11
IRQ12 -> 12
IRQ13 -> 13
IRQ14 -> 14
IRQ15 -> 15
.................................... done.
INITIALIZING CPU#1
PCI: PCI BIOS revision 2.10 entry at 0xf0080
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Assigning I/O space 5800-581f to device 00:a2
PCI: Enabling I/O for device 00:a2
PCI: Device 00:00 not found by BIOS
PCI: Device 00:a0 not found by BIOS
PCI: Device 00:a1 not found by BIOS
PCI: Device 00:a2 not found by BIOS
PCI: Device 00:a3 not found by BIOS
Linux NET4.0 for Linux 2.3
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
TCP: Hash tables configured (established 262144 bind 262144)
Starting kswapd v 1.5
Detected PS/2 Mouse Port.
Serial driver version 4.27 with no serial options enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
pty: 256 Unix98 ptys configured
Software Watchdog Timer: 0.05, timer margin: 60 sec
Uniform Multi-Platform E-IDE driver Revision: 6.19
PIIX4: IDE controller on PCI bus 00 dev a1
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xf100-0xf107, BIOS settings: hda:pio, hdb:pio
hda: CD-ROM CDU701-Q, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: ATAPI 14X CD-ROM drive, 128kB Cache
Uniform CDROM driver Revision: 2.55
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
sym53c8xx: at PCI bus 1, device 9, function 0
sym53c8xx: 53c876 detected
sym53c8xx: at PCI bus 1, device 9, function 1
sym53c8xx: 53c876 detected
sym53c876-0: rev=0x14, base=0xc6dfdf00, io_port=0x2000, irq=10
sym53c876-0: NCR clock is 40218KHz, 40218KHz
sym53c876-0: ID 7, Fast-20, Parity Checking
sym53c876-0: on-chip RAM at 0xc6dff000
sym53c876-0: restart (scsi reset).
sym53c876-0: Downloading SCSI SCRIPTS.
sym53c876-1: rev=0x14, base=0xc6dfde00, io_port=0x2400, irq=11
sym53c876-1: ID 7, Fast-20, Parity Checking
sym53c876-1: on-chip RAM at 0xc6dfe000
sym53c876-1: restart (scsi reset).
sym53c876-1: Downloading SCSI SCRIPTS.
scsi0 : sym53c8xx - version 1.3c
scsi1 : sym53c8xx - version 1.3c
scsi : 2 hosts.
scsi : detected total.
Compaq SMART2 Driver (v 1.0.4)
Found 1 controller(s)
Finding drives on ida0 (Smart Array 3200)
ida/c0d0: blksz=512 nr_blks=8380320
ida/c0d1: blksz=512 nr_blks=17764320
ida/c0d2: blksz=512 nr_blks=17764320
ida/c0d3: blksz=512 nr_blks=17764320
TLAN 1.0: eth0 irq= 9 io=2820, Compaq Netelligent Integrated 10/100 TX UTP,
Rev. 16
Partition check:
ida/c0d0: unknown partition table
ida/c0d1: unknown partition table
ida/c0d2: unknown partition table
ida/c0d3: unknown partition table
Syd Alsobrook
Network Administrator
Atlantic of Tampa
813-655-2126
Share what you know. Learn what you don't.
-
Linux SMP list: FIRST see FAQ at http://www.irisa.fr/prive/mentre/smp-faq/
To Unsubscribe: send "unsubscribe linux-smp" to [EMAIL PROTECTED]
