Hello, my kernel told me to e-mail this error to you and who am I to
argue? I am
running kernel version 2.2.11. Attached is the output of dmesg, I'm not
too sure
what other information is needed. It does not appear to anything
serious and this
is a server I'm setting up that is still in its testing phases so any
info or patches you want me to apply won't be a problem.
-Matt
Linux version 2.2.11 (root@faust) (gcc version egcs-2.91.66 19990314 (egcs-1.1.2
release)) #4 SMP Fri Aug 13 02:00:59 EDT 1999
Intel MultiProcessor Specification v1.4
Virtual Wire compatibility mode.
OEM ID: COMPAQ Product ID: PROLIANT APIC at: 0xFEE00000
Processor #1 Pentium(tm) Pro APIC version 16
Processor #0 Pentium(tm) Pro APIC version 16
I/O APIC #8 Version 17 at 0xFEC00000.
Processors: 2
mapped APIC to ffffe000 (fee00000)
mapped IOAPIC to ffffd000 (fec00000)
Detected 399066177 Hz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 398.13 BogoMIPS
Memory: 582376k/589824k available (900k kernel code, 420k reserved, 6064k data, 64k
init)
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.35 (19990512) Richard Gooch ([EMAIL PROTECTED])
per-CPU timeslice cutoff: 100.01 usecs.
CPU1: Intel Pentium II (Deschutes) stepping 02
calibrating APIC timer ...
..... CPU clock speed is 399.0654 MHz.
..... system bus clock speed is 99.7660 MHz.
Booting processor 0 eip 2000
Calibrating delay loop... 398.13 BogoMIPS
OK.
CPU0: Intel Pentium II (Deschutes) stepping 02
Total of 2 processors activated (796.26 BogoMIPS).
enabling symmetric IO mode... ...done.
ENABLING IO-APIC IRQs
init IO_APIC IRQs
IO-APIC pin 0, 5, 9, 10WARNING: ASSIGN_IRQ_VECTOR wrapped back to 52
, 31, 32, 33, 34 not connected.
number of MP IRQ sources: 40.
number of IO-APIC registers: 35.
testing the IO APIC.......................
.... register #00: 00000000
....... : physical APIC id: 00
.... register #01: 00220011
....... : max redirection entries: 0022
WARNING: unexpected IO-APIC, please mail
to [EMAIL PROTECTED]
....... : IO APIC version: 0011
.... register #02: 00000000
....... : arbitration: 00
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 000 00 0 0 0 0 0 1 1 59
02 0FF 0F 0 0 0 0 0 1 1 51
03 000 00 0 0 0 0 0 1 1 61
04 000 00 0 0 0 0 0 1 1 69
05 000 00 1 0 0 0 0 0 0 00
06 000 00 0 0 0 0 0 1 1 71
07 000 00 0 0 0 0 0 1 1 79
08 000 00 0 0 0 0 0 1 1 81
09 000 00 1 0 0 0 0 0 0 00
0a 000 00 1 0 0 0 0 0 0 00
0b 000 00 0 0 0 0 0 1 1 89
0c 000 00 0 0 0 0 0 1 1 91
0d 000 00 1 0 0 0 0 0 0 00
0e 000 00 0 0 0 0 0 1 1 99
0f 000 00 0 0 0 0 0 1 1 A1
10 0FF 0F 1 1 0 1 0 1 1 A9
11 0FF 0F 1 1 0 1 0 1 1 B1
12 0FF 0F 1 1 0 1 0 1 1 B9
13 0FF 0F 1 1 0 1 0 1 1 C1
14 0FF 0F 1 1 0 1 0 1 1 C9
15 0FF 0F 1 1 0 1 0 1 1 D1
16 0FF 0F 1 1 0 1 0 1 1 D9
17 0FF 0F 1 1 0 1 0 1 1 E1
18 0FF 0F 1 1 0 1 0 1 1 E9
19 0FF 0F 1 1 0 1 0 1 1 F1
1a 0FF 0F 1 1 0 1 0 1 1 F9
1b 0FF 0F 1 1 0 1 0 1 1 52
1c 0FF 0F 1 1 0 1 0 1 1 5A
1d 0FF 0F 1 1 0 1 0 1 1 62
1e 0FF 0F 1 1 0 1 0 1 1 6A
1f 000 00 1 0 0 0 0 0 0 00
20 000 00 1 0 0 0 0 0 0 00
21 000 00 1 0 0 0 0 0 0 00
22 000 00 1 0 0 0 0 0 0 00
IRQ to pin mappings:
IRQ0 -> 2
IRQ1 -> 1
IRQ3 -> 3
IRQ4 -> 4
IRQ6 -> 6
IRQ7 -> 7
IRQ8 -> 8
IRQ11 -> 11
IRQ12 -> 12
IRQ13 -> 13
IRQ14 -> 14
IRQ15 -> 15
IRQ16 -> 16
IRQ17 -> 17
IRQ18 -> 18
IRQ19 -> 19
IRQ20 -> 20
IRQ21 -> 21
IRQ22 -> 22
IRQ23 -> 23
IRQ24 -> 24
IRQ25 -> 25
IRQ26 -> 26
IRQ27 -> 27
IRQ28 -> 28
IRQ29 -> 29
IRQ30 -> 30
.................................... done.
mtrr: your CPUs had inconsistent fixed MTRR settings
mtrr: probably your BIOS does not setup all CPUs
PCI: PCI BIOS revision 2.10 entry at 0xf0080
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Assigning I/O space 5800-581f to device 00:a2
PCI: Enabling I/O for device 00:a2
PCI->APIC IRQ transform: (B1,I7,P0) -> 30
PCI->APIC IRQ transform: (B1,I9,P0) -> 23
PCI->APIC IRQ transform: (B1,I9,P1) -> 22
PCI: Device 00:00 not found by BIOS
PCI: Device 00:a0 not found by BIOS
PCI: Device 00:a1 not found by BIOS
PCI: Device 00:a2 not found by BIOS
PCI: Device 00:a3 not found by BIOS
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
Initializing RT netlink socket
Starting kswapd v 1.5
Detected PS/2 Mouse Port.
hda: Compaq CRD-8241B, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: ATAPI 24X CD-ROM drive, 128kB Cache
Uniform CDROM driver Revision: 2.55
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
sym53c8xx: at PCI bus 1, device 9, function 0
sym53c8xx: 53c876 detected
sym53c8xx: at PCI bus 1, device 9, function 1
sym53c8xx: 53c876 detected
sym53c876-0: rev=0x14, base=0xc6ffdf00, io_port=0x2000, irq=23
sym53c876-0: ID 7, Fast-20, Parity Checking
sym53c876-0: on-chip RAM at 0xc6fff000
sym53c876-0: restart (scsi reset).
sym53c876-0: Downloading SCSI SCRIPTS.
sym53c876-1: rev=0x14, base=0xc6ffde00, io_port=0x2400, irq=22
sym53c876-1: ID 7, Fast-20, Parity Checking
sym53c876-1: on-chip RAM at 0xc6ffe000
sym53c876-1: restart (scsi reset).
sym53c876-1: Downloading SCSI SCRIPTS.
scsi0 : sym53c8xx - version 1.3g
scsi1 : sym53c8xx - version 1.3g
scsi : 2 hosts.
sym53c876-0-<0,*>: FAST-20 WIDE SCSI 40.0 MB/s (50 ns, offset 16)
Vendor: COMPAQ Model: MAA3182SC Rev: 0814
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sda at scsi0, channel 0, id 0, lun 0
sym53c876-0-<2,*>: FAST-20 WIDE SCSI 40.0 MB/s (50 ns, offset 16)
Vendor: COMPAQ Model: MAA3182SC Rev: 0814
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sdb at scsi0, channel 0, id 2, lun 0
sym53c876-0-<0,0>: tagged command queue depth set to 4
sym53c876-0-<2,0>: tagged command queue depth set to 4
scsi : detected 2 SCSI disks total.
SCSI device sda: hdwr sector= 512 bytes. Sectors= 35566000 [17366 MB] [17.4 GB]
SCSI device sdb: hdwr sector= 512 bytes. Sectors= 35566000 [17366 MB] [17.4 GB]
TLAN 1.0: eth0 irq=30 io=2800, Compaq Netelligent Integrated 10/100 TX UTP, Rev. 16
Sending BOOTP and RARP requests....TLAN: eth0: Starting autonegotiation.
TLAN: eth0: Autonegotiation complete.
TLAN: eth0: Link active.
........?. timed out!
IP-Config: Auto-configuration of network failed.
Partition check:
sda: sda1 sda2
sdb: sdb1 sdb2 sdb3
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 64k freed
TLAN: eth0: Starting autonegotiation.
TLAN: eth0: Autonegotiation complete.
TLAN: eth0: Link active.
