his was in my messages log, can anyone tell me what this means ?

Oct  8 11:28:00 spiderone kernel: Unable to handle kernel paging request
at virtual address 401fc000
Oct  8 11:28:00 spiderone kernel: current->tss.cr3 = 022ae000, `r3 =
022ae000
Oct  8 11:28:00 spiderone kernel: *pde = 1f8a3067
Oct  8 11:28:00 spiderone kernel: *pte = 00000000
Oct  8 11:28:00 spiderone kernel: Oops: 0000
Oct  8 11:28:00 spiderone kernel: CPU:    0
Oct  8 11:28:00 spiderone kernel: EIP:    0010:[random_read+32/344]
Oct  8 11:28:00 spiderone kernel: EFLAGS: 00010206
Oct  8 11:28:00 spiderone kernel: eax: c471aa28   ebx: 12a28bf8   ecx:
00000017   edx: 000005b4
Oct  8 11:28:00 spiderone kernel: esi: 401fbfff   edi: 0a316b18   ebp:
1243ded4   esp: 1243de7c
Oct  8 11:28:00 spiderone kernel: ds: 0018   es: 0018   fs: 002b   gs:
002b   ss: 0018
Oct  8 11:28:00 spiderone kernel: Process httpd (pid: 5647, process nr:
256, stackpage=1243d000)
Oct  8 11:28:00 spiderone kernel: Stack: 0a316e60 000005b4 401fbd3f
0014bafa 401fbd3f 0a316858 000005b4 0000000
0
Oct  8 11:28:00 spiderone kernel:        00f11018 ffffffea 00007fac
058fc220 0a316844 00000000 00000000 0a316e6
0
Oct  8 11:28:00 spiderone kernel:        000005b4 000005b4 401fbd3f
0000226d 00005d3f 001b9e48 00000000 0014bbf
9
Oct  8 11:28:00 spiderone kernel: Call Trace:
[tcp_conn_request_fake+210/1284] [tcp_conn_request_fake+465/1284]
 [ip_fw_chk+1585/1948] [dev_get+46/60] [block_read+331/1464]
[get_cpuinfo+173/752] [write_ldt+99/740]
Oct  8 11:28:00 spiderone kernel: Code: 64 8b 1e 11 d8 89 1f 64 8b 5e 04
11 d8 89 5f 04 64 8b 5e 08


* System configuration
RH 5.2 Kernel 2.0.36, changed the tasks.h to have 4096 in the NR.
SMP not enabled.
Apache 1.3.8, changed the httpd.h to have 2048 proccesses.

* Hardware.
Dual PII Xion (SMP is not Enabled, yet)
512 MB ram
Megaraid Controller, RAID-5 hardware

* output from lsmod
Module         Pages    Used by
ip_alias           1            89

* /var/log/dmesg

Memory: sized by int13 0e801h
Console: 16 point font, 400 scans
Console: colour VGA+ 80x25, 1 virtual console (max 63)
pcibios_init : BIOS32 Service Directory structure at 0x000ffe80
pcibios_init : BIOS32 Service Directory entry at 0xffe90
pcibios_init : PCI BIOS revision 2.10 entry at 0xfcd6e
Probing PCI hardware.
Calibrating delay loop.. ok - 398.95 BogoMIPS
Memory: 515824k/524288k available (616k kernel code, 384k reserved,
7464k data)
Swansea University Computer Society NET3.035 for Linux 2.0
NET3: Unix domain sockets 0.13 for Linux NET3.035.
Swansea University Computer Society TCP/IP for NET3.034
IP Protocols: ICMP, UDP, TCP
Checking 386/387 coupling... Ok, fpu using exception 16 error reporting.

Checking 'hlt' instruction... Ok.
Linux version 2.0.36 ([EMAIL PROTECTED]) (gcc
version 2.7.2.3) #6 Tue Aug 17 21:50:37 EDT 1
999
Starting kswapd v 1.4.2.2
Ramdisk driver initialized : 16 ramdisks of 4096K size
loop: registered device at major 7
(scsi0) <Adaptec AIC-7860 Ultra SCSI host adapter> found at PCI 8/0
(scsi0) Narrow Channel, SCSI ID=7, 3/255 SCBs
(scsi0) Downloading sequencer code... 419 instructions downloaded
megaraid: found 0x101e:0x9010:idx 0:bus 0:slot 8:fun 0
 scsi1: Found a MegaRAID controller at 0xd890, IRQ: 14
megaraid: [Uc77:1.47] detected 1 logical drives
scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.1.4/3.2.4
       <Adaptec AIC-7860 Ultra SCSI host adapter>
scsi1 : AMI MegaRAID Uc77 254 commands 16 targs 2 chans
scsi : 2 hosts.
  Vendor: NEC       Model: CD-ROM DRIVE:465  Rev: 1.03
  Type:   CD-ROM                             ANSI SCSI revision: 02
scsi1: scanning channel A for devices.
  Vendor: DELL      Model: 1x6 U2W SCSI BP   Rev: 5.11
  Type:   Processor                          ANSI SCSI revision: 02
scsi1: scanning channel B for devices.
scsi1: scanning channel C for devices.
  Vendor: MegaRAID  Model: LD0 RAID5 17136R  Rev: Uc77
  Type:   Direct-Access                      ANSI SCSI revision: 02
Detected scsi disk sda at scsi1, channel 2, id 0, lun 0
scsi : detected 1 SCSI disk total.
SCSI device sda: hdwr sector= 512 bytes. Sectors= 35094528 [17136 MB]
[17.1 GB]
eepro100.c:v0.99B 4/7/98 Donald Becker
[EMAIL PROTECTED]
eth0: OEM i82557/i82558 10/100 Ethernet at 0xfce0, 00:90:27:33:46:2D,
IRQ 10.
  Board assembly 697680-002, Physical connectors present: RJ45
  Primary interface chip i82555 PHY #1.
  General self-test: passed.
  Serial sub-system self-test: passed.
  Internal registers self-test: passed.
  ROM checksum self-test: passed (0x24c9f043).
  Receiver lock-up workaround activated.
eepro100.c:v0.99B 4/7/98 Donald Becker
[EMAIL PROTECTED]
Partition check:
 sda: sda1 sda2 < sda5 sda6 >
VFS: Mounted root (ext2 filesystem) readonly.
Adding Swap: 88320k swap-space (priority -1)

Any help in this issue would be greatly appriciated.

Thank you.

-
Linux SMP list: FIRST see FAQ at http://www.irisa.fr/prive/mentre/smp-faq/
To Unsubscribe: send "unsubscribe linux-smp" to [EMAIL PROTECTED]

Reply via email to