>>Is there a jumper in the
>>motherboard i have to enable in order for the recovery disk to work ?
Yes, according to the manual, there is a jumper, (I don't have the manual
in front of me at the moment), which will enable you to reset the bios
to default settings. You insert the jumper, power on the board and
immediately power it off again and remove the jumper. This should allow you
to bring up your VGA card in alphaunmeric mode - talk to the BIOS.
>From there you should be able to make the settings which will
allow you to bring up the on-board floppy disk controller. I would suggest
booting a floppy which contains a LILO image, if you have one. Since
you probably don't and may have no way of creating one; I would suggest
you use a Linux installation floppy.
Good Luck!
Bob
-
Linux SMP list: FIRST see FAQ at http://www.irisa.fr/prive/dmentre/smp-howto/
To Unsubscribe: send "unsubscribe linux-smp" to [EMAIL PROTECTED]
