On a brand new HP Kayak XU800 I get the unexpectd IO-APIC warning. Also, this machine has a problem of not reporting the memory correctly (which I've not seen for a long time). While it has 512M only 64M is seen by the kernel (using append="mem=512M" fixes the problem). Cheers, Fons. -- Org: CERN, European Laboratory for Particle Physics. Mail: 1211 Geneve 23, Switzerland E-Mail: [EMAIL PROTECTED] Phone: +41 22 7679248 WWW: http://root.cern.ch/~rdm/ Fax: +41 22 7677910 Linux version 2.2.14 ([EMAIL PROTECTED]) (gcc version egcs-2.91.66 19990314/Linux (egcs-1.1.2 release)) #1 SMP Wed Mar 22 19:40:26 MET 2000 Intel MultiProcessor Specification v1.1 Virtual Wire compatibility mode. OEM ID: HP_PDCO Product ID: CARMEL__ APIC at: 0xFEE00000 Processor #0 Pentium(tm) Pro APIC version 17 Processor #1 Pentium(tm) Pro APIC version 17 I/O APIC #2 Version 32 at 0xFEC00000. Processors: 2 mapped APIC to ffffe000 (fee00000) mapped IOAPIC to ffffd000 (fec00000) Detected 731025413 Hz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 729.09 BogoMIPS Memory: 516880k/524288k available (1332k kernel code, 424k reserved, 5560k data, 92k init) Dentry hash table entries: 65536 (order 7, 512k) Buffer cache hash table entries: 524288 (order 9, 2048k) Page cache hash table entries: 131072 (order 7, 512k) VFS: Diskquotas version dquot_6.4.0 initialized Checking 386/387 coupling... OK, FPU using exception 16 error reporting. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.35a (19990819) Richard Gooch ([EMAIL PROTECTED]) per-CPU timeslice cutoff: 50.00 usecs. CPU0: Intel Pentium III (Coppermine) stepping 01 calibrating APIC timer ... ..... CPU clock speed is 731.0566 MHz. ..... system bus clock speed is 132.9192 MHz. Booting processor 1 eip 2000 Calibrating delay loop... 730.73 BogoMIPS OK. CPU1: Intel Pentium III (Coppermine) stepping 01 Total of 2 processors activated (1459.81 BogoMIPS). enabling symmetric IO mode... ...done. ENABLING IO-APIC IRQs init IO_APIC IRQs IO-APIC (apicid-pin) 2-0, 2-20, 2-21, 2-22, 2-23 not connected. number of MP IRQ sources: 25. number of IO-APIC #2 registers: 24. testing the IO APIC....................... IO APIC #2...... .... register #00: 02000000 ....... : physical APIC id: 02 .... register #01: 00170020 ....... : max redirection entries: 0017 ....... : IO APIC version: 0020 WARNING: unexpected IO-APIC, please mail to [EMAIL PROTECTED] .... register #02: 00000000 ....... : arbitration: 00 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 000 00 0 0 0 0 0 1 1 59 02 0FF 0F 0 0 0 0 0 1 1 51 03 000 00 0 0 0 0 0 1 1 61 04 000 00 0 0 0 0 0 1 1 69 05 000 00 0 0 0 0 0 1 1 71 06 000 00 0 0 0 0 0 1 1 79 07 000 00 0 0 0 0 0 1 1 81 08 000 00 0 0 0 0 0 1 1 89 09 000 00 0 0 0 0 0 1 1 91 0a 000 00 0 0 0 0 0 1 1 99 0b 000 00 0 0 0 0 0 1 1 A1 0c 000 00 0 0 0 0 0 1 1 A9 0d 000 00 1 0 0 0 0 0 0 00 0e 000 00 0 0 0 0 0 1 1 B1 0f 000 00 0 0 0 0 0 1 1 B9 10 0FF 0F 1 1 0 1 0 1 1 C1 11 0FF 0F 1 1 0 1 0 1 1 C9 12 0FF 0F 1 1 0 1 0 1 1 D1 13 0FF 0F 1 1 0 1 0 1 1 D9 14 000 00 1 0 0 0 0 0 0 00 15 000 00 1 0 0 0 0 0 0 00 16 000 00 1 0 0 0 0 0 0 00 17 000 00 1 0 0 0 0 0 0 00 IRQ to pin mappings: IRQ0 -> 2 IRQ1 -> 1 IRQ3 -> 3 IRQ4 -> 4 IRQ5 -> 5 IRQ6 -> 6 IRQ7 -> 7 IRQ8 -> 8 IRQ9 -> 9 IRQ10 -> 10 IRQ11 -> 11 IRQ12 -> 12 IRQ13 -> 13 IRQ14 -> 14 IRQ15 -> 15 IRQ16 -> 16 IRQ17 -> 17 IRQ18 -> 18 IRQ19 -> 19 .................................... done. PCI: PCI BIOS revision 2.10 entry at 0xfdb91 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI->APIC IRQ transform: (B0,I31,P3) -> 19 PCI->APIC IRQ transform: (B4,I0,P0) -> 16 PCI: Enabling memory for device 03:00 PCI->APIC IRQ transform: (B3,I7,P0) -> 18 PCI->APIC IRQ transform: (B3,I9,P0) -> 18 PCI->APIC IRQ transform: (B1,I5,P0) -> 17 PCI->APIC IRQ transform: (B1,I8,P0) -> 16 PCI->APIC IRQ transform: (B1,I11,P0) -> 19 Linux NET4.0 for Linux 2.2 Based upon Swansea University Computer Society NET3.039 NET4: Unix domain sockets 1.0 for Linux NET4.0. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP TCP: Hash tables configured (ehash 524288 bhash 65536) Initializing RT netlink socket Starting kswapd v 1.5 Detected PS/2 Mouse Port. Serial driver version 4.27 with no serial options enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 8250 pty: 256 Unix98 ptys configured Real Time Clock Driver v1.09 PCI_IDE: unknown IDE controller on PCI bus 00 device f9, VID=8086, DID=2411 PCI_IDE: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:pio, hdb:pio ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio hdc: Hewlett-Packard CD-Writer Plus 8100, ATAPI CDROM drive ide1 at 0x170-0x177,0x376 on irq 15 hdc: ATAPI 24X CD-ROM CD-R/RW drive, 1024kB Cache Uniform CDROM driver Revision: 2.56 Floppy drive(s): fd0 is 1.44M FDC 0 is a National Semiconductor PC87306 md driver 0.36.6 MAX_MD_DEV=4, MAX_REAL=8 linear personality registered raid0 personality registered (scsi0) <Adaptec AIC-7892 Ultra 160/m SCSI host adapter> found at PCI 9/0 (scsi0) Wide Channel, SCSI ID=7, 32/255 SCBs (scsi0) Downloading sequencer code... 385 instructions downloaded scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.1.21/3.2.4 <Adaptec AIC-7892 Ultra 160/m SCSI host adapter> scsi : 1 host. (scsi0:0:0:0) Synchronous at 160.0 Mbyte/sec, offset 31. Vendor: QUANTUM Model: ATLAS 10K 18WLS Rev: UCHK Type: Direct-Access ANSI SCSI revision: 03 Detected scsi disk sda at scsi0, channel 0, id 0, lun 0 scsi : detected 1 SCSI disk total. SCSI device sda: hdwr sector= 512 bytes. Sectors= 35566480 [17366 MB] [17.4 GB] pcnet32.c: PCI bios is present, checking for devices... The PCI BIOS has not enabled the device at 1/88! Updating PCI command 0103->0107. rtl8139.c:v1.07 5/6/99 Donald Becker http://cesdis.gsfc.nasa.gov/linux/drivers/rtl8139.html eth0: SMC1211TX EZCard 10/100 (RealTek RTL8139) at 0xa800, IRQ 19, 00:10:b5:05:30:f4. Partition check: sda: sda1 sda2 sda3 VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 92k freed Adding Swap: 771112k swap-space (priority -1) acenic.c: v0.33a 08/16/99 Jes Sorensen ([EMAIL PROTECTED]) PCI: Enabling bus mastering for device 03:38 eth1: 3Com 3C985 Gigabit Ethernet at 0xfd8f8000, irq 18, PCI latency 64 clks Tigon II (Rev. 6), Firmware: 12.3.10, MAC: 00:60:08:f5:c7:15 eth1: Firmware up and running nfsd_fh_init : initialized fhcache, entries=1024 PCI: Enabling bus mastering for device 01:28 - Linux SMP list: FIRST see FAQ at http://www.irisa.fr/prive/dmentre/smp-howto/ To Unsubscribe: send "unsubscribe linux-smp" to [EMAIL PROTECTED]
