Dear Provider of a wonderful feature of the linux-kernel
I get an unknow IOAPIC message on an
asus P3C-D motherboard with two 800Mhz PIII (coppermine it seems). You ask
me to write, which I hereby do. I hope I have attached a proper subset of
the /var/log/dmesg file.
Regards!
Nikolaj
--
/Nikolaj [EMAIL PROTECTED] +45 45-7676-87 / 2231-7465 priv: 3811-1864
> Internal APIC present.
Bootup CPU
Processor #0 Pentium(tm) Pro APIC version 17
Floating point unit present.
Machine Exception supported.
64 bit compare & exchange supported.
Internal APIC present.
Bus #0 is PCI
Bus #1 is PCI
Bus #2 is PCI
Bus #3 is ISA
I/O APIC #2 Version 17 at 0xFEC00000.
Processors: 2
mapped APIC to ffffe000 (fee00000)
mapped IOAPIC to ffffd000 (fec00000)
relocating initrd image:
initrd_start:0xc0f8c000 initrd_end:0xc0fff800
mem_start:0xc0303000 mem_end:0xdfff0000
initrd_size:0x00073800 dest:0xdff7c000
Detected 803429 kHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 1602.36 BogoMIPS
Memory: 516080k/524224k available (1432k kernel code, 420k reserved, 5676k data, 152k
init, 0k bigmem)
Dentry hash table entries: 65536 (order 7, 512k)
Buffer cache hash table entries: 524288 (order 9, 2048k)
Page cache hash table entries: 131072 (order 7, 512k)
VFS: Diskquotas version dquot_6.4.0 initialized
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.35a (19990819) Richard Gooch ([EMAIL PROTECTED])
per-CPU timeslice cutoff: 49.98 usecs.
CPU1: Intel Pentium III (Coppermine) stepping 03
Getting VERSION: 40011
Getting VERSION: 40011
Getting LVT0: 8700
Getting LVT1: 400
setup_APIC_clock() called.
calibrating APIC timer ...
..... 8034210 CPU clocks in 1 timer chip tick.
..... 1339033 APIC bus clocks in 1 timer chip tick.
..... CPU clock speed is 803.4210 MHz.
..... system bus clock speed is 133.9033 MHz.
CPU map: 3
Booting processor 0 eip 2000
Setting warm reset code and vector.
1.
2.
3.
Asserting INIT.
Deasserting INIT.
Sending STARTUP #1.
After apic_write.
Before start apic_write.
Startup point 1.
Waiting for send to finish...
+CPU#0 waiting for CALLOUT
Sending STARTUP #2.
After apic_write.
Before start apic_write.
Startup point 1.
Waiting for send to finish...
+After Startup.
Before Callout 0.
After Callout 0.
CALLIN, before enable_local_APIC().
setup_APIC_clock() called.
waiting for other CPU calibrating APIC ... done, continuing.
Calibrating delay loop... 1605.63 BogoMIPS
Stack at about dff77fa4
OK.
CPU0: Intel Pentium III (Coppermine) stepping 03
CPU has booted.
Before bogomips.
Total of 2 processors activated (3207.99 BogoMIPS).
Before bogocount - setting activated=1.
Boot done.
enabling symmetric IO mode... ...done.
ENABLING IO-APIC IRQs
init IO_APIC IRQs
IO-APIC (apicid-pin) 2-0, 2-5, 2-9, 2-10, 2-11, 2-13, 2-20, 2-21, 2-22, 2-23 not
connected.
number of MP IRQ sources: 15.
number of IO-APIC #2 registers: 24.
testing the IO APIC.......................
IO APIC #2......
.... register #00: 02000000
....... : physical APIC id: 02
.... register #01: 00170020
....... : max redirection entries: 0017
....... : IO APIC version: 0020
WARNING: unexpected IO-APIC, please mail
to [EMAIL PROTECTED]
.... register #02: 00000000
....... : arbitration: 00
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 000 00 0 0 0 0 0 1 1 59
02 0FF 0F 0 0 0 0 0 1 1 51
03 000 00 0 0 0 0 0 1 1 61
04 000 00 0 0 0 0 0 1 1 69
05 000 00 1 0 0 0 0 0 0 00
06 000 00 0 0 0 0 0 1 1 71
07 000 00 0 0 0 0 0 1 1 79
08 000 00 0 0 0 0 0 1 1 81
09 000 00 1 0 0 0 0 0 0 00
0a 000 00 1 0 0 0 0 0 0 00
0b 000 00 1 0 0 0 0 0 0 00
0c 000 00 0 0 0 0 0 1 1 89
0d 000 00 1 0 0 0 0 0 0 00
0e 000 00 0 0 0 0 0 1 1 91
0f 000 00 0 0 0 0 0 1 1 99
10 0FF 0F 1 1 0 1 0 1 1 A1
11 0FF 0F 1 1 0 1 0 1 1 A9
12 0FF 0F 1 1 0 1 0 1 1 B1
13 0FF 0F 1 1 0 1 0 1 1 B9
14 000 00 1 0 0 0 0 0 0 00
15 000 00 1 0 0 0 0 0 0 00
16 000 00 1 0 0 0 0 0 0 00
17 000 00 1 0 0 0 0 0 0 00
IRQ to pin mappings:
IRQ0 -> 2
IRQ1 -> 1
IRQ3 -> 3
IRQ4 -> 4
IRQ5 -> 18
IRQ6 -> 6
IRQ7 -> 7
IRQ8 -> 8
IRQ9 -> 19
IRQ10 -> 17
IRQ11 -> 16
IRQ12 -> 12
IRQ14 -> 14
IRQ15 -> 15
.................................... done.
checking TSC synchronization across CPUs: passed.
Setting commenced=1, go go go
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs
PCI: PCI BIOS revision 2.10 entry at 0xf06d0
PCI: Using configuration type 1
PCI: Probing PCI hardware
