The consensus seems to be you'll have a LOT of problems with that
board. I had *nothing* but problems with it. I got the APIC
errors you refer to, the integrated ethernet was spotty, and it
was a downright dog in SMP mode (when it worked at all). This
was with Redhat 6.2 and 2.2.14-2.2.16 kernels. It also doesn't
work with Win2000 Server or Win NT 4.0 so it is definitely a
hardware issue.
Cheers,
Chris
> From [EMAIL PROTECTED] Mon Jul 24 18:07:26 2000
>
> Hi,
> I am trying to boot a 1GB SMP Linux 2.2.16 kernel on a Supermicro
> PIIIDME motherboard, but it seems to be struggling with the
> IO-APICs. It has requested me to send you an email, so here is the
> output of dmesg. For reference, the built-in Ethernet (i82559) does
> not seem to work / get enabled, because the LED on the back of the
> box only lights up (amber) when the machine that it is connected to
> is powered up. There also seem to be a few unrecognised PCI devices,
> and so I have also attached the output of the PCI bus. In the
> meantime, I guess I'll have to use a UP kernel to get the machine
> networked(?).
>
> Cheers,
> Chris
>
>
> Linux version 2.2.16 (root@wellhouse) (gcc version 2.95.2 19991024 (release)) #4 SMP
>Sat Jul 22 02:16:58 EST 2000
> Intel MultiProcessor Specification v1.1
> Virtual Wire compatibility mode.
> OEM ID: _AMI_ Product ID: 840_CARMEL__ APIC at: 0xFEE00000
> Processor #0 Pentium(tm) Pro APIC version 17
> Processor #1 Pentium(tm) Pro APIC version 17
> I/O APIC #2 Version 32 at 0xFEC00000.
> I/O APIC #3 Version 32 at 0xFD8FF000.
> Processors: 2
> mapped APIC to ffffe000 (fee00000)
> mapped IOAPIC to ffffd000 (fec00000)
> mapped IOAPIC to ffffc000 (fd8ff000)
> Detected 732997 kHz processor.
> Console: colour VGA+ 80x25
> Calibrating delay loop... 1461.45 BogoMIPS
> Memory: 257784k/262016k available (916k kernel code, 428k reserved, 2832k data, 56k
>init)
> Dentry hash table entries: 32768 (order 6, 256k)
> Buffer cache hash table entries: 262144 (order 8, 1024k)
> Page cache hash table entries: 65536 (order 6, 256k)
> VFS: Diskquotas version dquot_6.4.0 initialized
> Pentium-III serial number disabled.
> Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
> Checking 'hlt' instruction... OK.
> POSIX conformance testing by UNIFIX
> mtrr: v1.35a (19990819) Richard Gooch ([EMAIL PROTECTED])
> Pentium-III serial number disabled.
> per-CPU timeslice cutoff: 50.01 usecs.
> CPU0: Intel Pentium III (Coppermine) stepping 03
> calibrating APIC timer ...
> ..... CPU clock speed is 733.0092 MHz.
> ..... system bus clock speed is 133.2742 MHz.
> Booting processor 1 eip 2000
> Calibrating delay loop... 1464.73 BogoMIPS
> Pentium-III serial number disabled.
> OK.
> CPU1: Intel Pentium III (Coppermine) stepping 03
> Total of 2 processors activated (2926.18 BogoMIPS).
> enabling symmetric IO mode... ...done.
> ENABLING IO-APIC IRQs
> init IO_APIC IRQs
> IO-APIC (apicid-pin) 2-0, 2-18, 2-20, 2-21, 2-22, 2-23, 3-0, 3-1, 3-2, 3-3, 3-4,
>3-5, 3-6, 3-7, 3-8, 3-9, 3-10, 3-11, 3-12, 3-13, 3-14, 3-15, 3-16, 3-17, 3-18, 3-19,
>3-20, 3-21, 3-22, 3-23 not connected.
> number of MP IRQ sources: 23.
> number of IO-APIC #2 registers: 24.
> number of IO-APIC #3 registers: 24.
> testing the IO APIC.......................
>
> IO APIC #2......
> .... register #00: 02000000
> ....... : physical APIC id: 02
> .... register #01: 00170020
> ....... : max redirection entries: 0017
> ....... : IO APIC version: 0020
> WARNING: unexpected IO-APIC, please mail
> to [EMAIL PROTECTED]
> .... register #02: 00000000
> ....... : arbitration: 00
> .... IRQ redirection table:
> NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
> 00 000 00 1 0 0 0 0 0 0 00
> 01 000 00 0 0 0 0 0 1 1 59
> 02 0FF 0F 0 0 0 0 0 1 1 51
> 03 000 00 0 0 0 0 0 1 1 61
> 04 000 00 0 0 0 0 0 1 1 69
> 05 000 00 0 0 0 0 0 1 1 71
> 06 000 00 0 0 0 0 0 1 1 79
> 07 000 00 0 0 0 0 0 1 1 81
> 08 000 00 0 0 0 0 0 1 1 89
> 09 000 00 0 0 0 0 0 1 1 91
> 0a 000 00 0 0 0 0 0 1 1 99
> 0b 000 00 0 0 0 0 0 1 1 A1
> 0c 000 00 0 0 0 0 0 1 1 A9
> 0d 000 00 1 0 0 0 0 0 0 00
> 0e 000 00 0 0 0 0 0 1 1 B1
> 0f 000 00 0 0 0 0 0 1 1 B9
> 10 0FF 0F 1 1 0 1 0 1 1 C1
> 11 0FF 0F 1 1 0 1 0 1 1 C9
> 12 000 00 1 0 0 0 0 0 0 00
> 13 0FF 0F 1 1 0 1 0 1 1 D1
> 14 000 00 1 0 0 0 0 0 0 00
> 15 000 00 1 0 0 0 0 0 0 00
> 16 000 00 1 0 0 0 0 0 0 00
> 17 000 00 1 0 0 0 0 0 0 00
>
> IO APIC #3......
> .... register #00: 03000000
> ....... : physical APIC id: 03
> .... register #01: 00178020
> ....... : max redirection entries: 0017
> ....... : IO APIC version: 0020
> WARNING: unexpected IO-APIC, please mail
> to [EMAIL PROTECTED]
> WARNING: unexpected IO-APIC, please mail
> to [EMAIL PROTECTED]
> .... register #02: 0F000000
> ....... : arbitration: 0F
> .... IRQ redirection table:
> NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
> 00 000 00 1 0 0 0 0 0 0 00
> 01 000 00 1 0 0 0 0 0 0 00
> 02 000 00 1 0 0 0 0 0 0 00
> 03 000 00 1 0 0 0 0 0 0 00
> 04 000 00 1 0 0 0 0 0 0 00
> 05 000 00 1 0 0 0 0 0 0 00
> 06 000 00 1 0 0 0 0 0 0 00
> 07 000 00 1 0 0 0 0 0 0 00
> 08 000 00 1 0 0 0 0 0 0 00
> 09 000 00 1 0 0 0 0 0 0 00
> 0a 000 00 1 0 0 0 0 0 0 00
> 0b 000 00 1 0 0 0 0 0 0 00
> 0c 000 00 1 0 0 0 0 0 0 00
> 0d 000 00 1 0 0 0 0 0 0 00
> 0e 000 00 1 0 0 0 0 0 0 00
> 0f 000 00 1 0 0 0 0 0 0 00
> 10 000 00 1 0 0 0 0 0 0 00
> 11 000 00 1 0 0 0 0 0 0 00
> 12 000 00 1 0 0 0 0 0 0 00
> 13 000 00 1 0 0 0 0 0 0 00
> 14 000 00 1 0 0 0 0 0 0 00
> 15 000 00 1 0 0 0 0 0 0 00
> 16 000 00 1 0 0 0 0 0 0 00
> 17 000 00 1 0 0 0 0 0 0 00
> IRQ to pin mappings:
> IRQ0 -> 2
> IRQ1 -> 1
> IRQ3 -> 3
> IRQ4 -> 4
> IRQ5 -> 5
> IRQ6 -> 6
> IRQ7 -> 7
> IRQ8 -> 8
> IRQ9 -> 9
> IRQ10 -> 10
> IRQ11 -> 11
> IRQ12 -> 12
> IRQ13 -> 13
> IRQ14 -> 14
> IRQ15 -> 15
> IRQ16 -> 16
> IRQ17 -> 17
> IRQ19 -> 19
> .................................... done.
> checking TSC synchronization across CPUs: passed.
> PCI: PCI BIOS revision 2.10 entry at 0xfdb91
> PCI: Using configuration type 1
> PCI: Probing PCI hardware
> PCI->APIC IRQ transform: (B0,I31,P3) -> 19
> PCI->APIC IRQ transform: (B0,I31,P1) -> 17
> PCI->APIC IRQ transform: (B0,I31,P1) -> 17
> PCI->APIC IRQ transform: (B4,I0,P0) -> 16
> PCI->APIC IRQ transform: (B1,I8,P0) -> 16
> Linux NET4.0 for Linux 2.2
> Based upon Swansea University Computer Society NET3.039
> NET4: Unix domain sockets 1.0 for Linux NET4.0.
> NET4: Linux TCP/IP 1.0 for NET4.0
> IP Protocols: ICMP, UDP, TCP
> TCP: Hash tables configured (ehash 262144 bhash 65536)
> Initializing RT netlink socket
> Starting kswapd v 1.5
> Detected PS/2 Mouse Port.
> Serial driver version 4.27 with SHARE_IRQ enabled
> ttyS00 at 0x03f8 (irq = 4) is a 16550A
> ttyS01 at 0x02f8 (irq = 3) is a 16550A
> pty: 256 Unix98 ptys configured
> Real Time Clock Driver v1.09
> RAM disk driver initialized: 16 RAM disks of 4096K size
> PCI_IDE: unknown IDE controller on PCI bus 00 device f9, VID=8086, DID=2411
> PCI_IDE: not 100% native mode: will probe irqs later
> ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
> ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio
> hda: ST320420A, ATA DISK drive
> hdc: SONY CD-RW CRX145E, ATAPI CDROM drive
> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> ide1 at 0x170-0x177,0x376 on irq 15
> hda: ST320420A, 19458MB w/2048kB Cache, CHS=2480/255/63
> hdc: ATAPI 32X CD-ROM CD-R/RW drive, 4096kB Cache
> Uniform CD-ROM driver Revision: 3.10
> Floppy drive(s): fd0 is 1.44M
> FDC 0 is a post-1991 82077
> scsi : 0 hosts.
> scsi : detected total.
> eepro100.c:v1.09j-t 9/29/99 Donald Becker
>http://cesdis.gsfc.nasa.gov/linux/drivers/eepro100.html
> eepro100.c: $Revision: 1.20.2.10 $ 2000/05/31 Modified by Andrey V. Savochkin
><[EMAIL PROTECTED]> and others
> eth0: OEM i82557/i82558 10/100 Ethernet, 00:30:48:21:0C:51, IRQ 16.
> Receiver lock-up bug exists -- enabling work-around.
> Board assembly 000d80-134, Physical connectors present:
> Primary interface chip None PHY #0.
> General self-test: passed.
> Serial sub-system self-test: passed.
> Internal registers self-test: passed.
> ROM checksum self-test: passed (0x04f4518b).
> Receiver lock-up workaround activated.
> eepro100.c:v1.09j-t 9/29/99 Donald Becker
>http://cesdis.gsfc.nasa.gov/linux/drivers/eepro100.html
> eepro100.c: $Revision: 1.20.2.10 $ 2000/05/31 Modified by Andrey V. Savochkin
><[EMAIL PROTECTED]> and others
> Partition check:
> hda: hda1
> VFS: Mounted root (ext2 filesystem) readonly.
> Freeing unused kernel memory: 56k freed
>
>
>
> 00:00.0 Class 0600: 8086:1a21 (rev 01)
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
>SERR+ FastB2B-
> Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
><MAbort+ >SERR- <PERR+
> Latency: 0
> Region 0: Memory at f8000000 (32-bit, prefetchable)
> Capabilities: [a0] AGP version 2.0
> Status: RQ=31 SBA+ 64bit- FW+ Rate=x1,x2
> Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
> 00: 86 80 21 1a 06 01 90 a0 01 00 00 06 00 00 00 00
> 10: 08 00 00 f8 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 30: 00 00 00 00 a0 00 00 00 00 00 00 00 00 00 00 00
>
> 00:01.0 Class 0604: 8086:1a23 (rev 01)
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
>SERR+ FastB2B-
> Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
><MAbort- >SERR- <PERR-
> Latency: 64
> Bus: primary=00, secondary=04, subordinate=04, sec-latency=64
> I/O behind bridge: 0000d000-0000dfff
> Memory behind bridge: fda00000-feafffff
> Prefetchable memory behind bridge: f1100000-f51fffff
> BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
> 00: 86 80 23 1a 07 01 a0 00 01 00 04 06 00 40 01 00
> 10: 00 00 00 00 00 00 00 00 00 04 04 40 d0 d0 a0 22
> 20: a0 fd a0 fe 10 f1 10 f5 00 00 00 00 00 00 00 00
> 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0b 00
>
> 00:02.0 Class 0604: 8086:1a24 (rev 01)
> Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV+ VGASnoop- ParErr- Stepping-
>SERR+ FastB2B-
> Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
><MAbort- >SERR- <PERR-
> Latency: 64
> Bus: primary=00, secondary=02, subordinate=03, sec-latency=64
> I/O behind bridge: 0000b000-0000cfff
> Memory behind bridge: fd800000-fd9fffff
> Prefetchable memory behind bridge: f0f00000-f10fffff
> BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
> 00: 86 80 24 1a 1f 01 a0 00 01 00 04 06 00 40 01 00
> 10: 00 00 00 00 00 00 00 00 00 02 03 40 b0 c0 a0 22
> 20: 80 fd 90 fd f0 f0 00 f1 00 00 00 00 00 00 00 00
> 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 03 00
>
> 00:1e.0 Class 0604: 8086:2418 (rev 02)
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
>SERR+ FastB2B-
> Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
><MAbort- >SERR- <PERR-
> Latency: 0
> Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
> I/O behind bridge: 0000a000-0000afff
> Memory behind bridge: fd300000-fd7fffff
> Prefetchable memory behind bridge: f0e00000-f0efffff
> BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
> 00: 86 80 18 24 07 01 80 00 02 00 04 06 00 00 01 00
> 10: 00 00 00 00 00 00 00 00 00 01 01 40 a0 a0 80 22
> 20: 30 fd 70 fd e0 f0 e0 f0 00 00 00 00 00 00 00 00
> 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 03 00
>
> 00:1f.0 Class 0601: 8086:2410 (rev 02)
> Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping-
>SERR+ FastB2B-
> Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
><MAbort- >SERR- <PERR-
> Latency: 0
> 00: 86 80 10 24 0f 01 80 02 02 00 01 06 00 00 80 00
> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
> 00:1f.1 Class 0101: 8086:2411 (rev 02) (prog-if 80 [Master])
> Subsystem: 8086:2411
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
>SERR- FastB2B-
> Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
><MAbort- >SERR- <PERR-
> Latency: 0
> Region 4: I/O ports at ffa0
> 00: 86 80 11 24 05 00 80 02 02 80 01 01 00 00 00 00
> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 20: a1 ff 00 00 00 00 00 00 00 00 00 00 86 80 11 24
> 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
> 00:1f.2 Class 0c03: 8086:2412 (rev 02)
> Subsystem: 8086:2412
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
>SERR- FastB2B-
> Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
><MAbort- >SERR- <PERR-
> Latency: 0
> Interrupt: pin D routed to IRQ 19
> Region 4: I/O ports at ef80
> 00: 86 80 12 24 05 00 80 02 02 00 03 0c 00 00 00 00
> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 81 ef 00 00 00 00 00 00 00 00 00 00 86 80 12 24
> 30: 00 00 00 00 00 00 00 00 00 00 00 00 09 04 00 00
>
> 00:1f.3 Class 0c05: 8086:2413 (rev 02)
> Subsystem: 8086:2413
> Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
>SERR- FastB2B-
> Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
><MAbort- >SERR- <PERR-
> Interrupt: pin B routed to IRQ 17
> Region 4: I/O ports at efa0
> 00: 86 80 13 24 01 00 80 02 02 00 05 0c 00 00 00 00
> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 20: a1 ef 00 00 00 00 00 00 00 00 00 00 86 80 13 24
> 30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 02 00 00
>
> 00:1f.5 Class 0401: 8086:2415 (rev 02)
> Subsystem: 4352:5934
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
>SERR- FastB2B-
> Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
><MAbort- >SERR- <PERR-
> Latency: 0
> Interrupt: pin B routed to IRQ 17
> Region 0: I/O ports at e800
> Region 1: I/O ports at ef00
> 00: 86 80 15 24 05 00 80 02 02 00 01 04 00 00 00 00
> 10: 01 e8 00 00 01 ef 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 52 43 34 59
> 30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 02 00 00
>
> 01:08.0 Class 0200: 8086:1229 (rev 08)
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping-
>SERR+ FastB2B-
> Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
><MAbort- >SERR- <PERR-
> Latency: 64 (2000ns min, 14000ns max), cache line size 08
> Interrupt: pin A routed to IRQ 16
> Region 0: Memory at fd7ff000 (32-bit, non-prefetchable)
> Region 1: I/O ports at af00
> Region 2: Memory at fd600000 (32-bit, non-prefetchable)
> Expansion ROM at fd500000 [disabled]
> Capabilities: [dc] Power Management version 2
> Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA
>PME(D0+,D1+,D2+,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=2 PME-
> 00: 86 80 29 12 17 01 90 02 08 00 00 02 08 40 00 00
> 10: 00 f0 7f fd 01 af 00 00 00 00 60 fd 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 30: 00 00 50 fd dc 00 00 00 00 00 00 00 0b 01 08 38
>
> 02:1f.0 Class 0604: 8086:1360 (rev 02)
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
>SERR+ FastB2B-
> Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
><MAbort- >SERR- <PERR-
> Latency: 0
> Bus: primary=02, secondary=03, subordinate=03, sec-latency=64
> I/O behind bridge: 0000b000-0000bfff
> Memory behind bridge: fd800000-fd8fffff
> Prefetchable memory behind bridge: f0f00000-f0ffffff
> BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
> 00: 86 80 60 13 07 01 20 00 02 00 04 06 00 00 01 00
> 10: 00 00 00 00 00 00 00 00 02 03 03 40 b0 b0 a0 22
> 20: 80 fd 80 fd f0 f0 f0 f0 00 00 00 00 00 00 00 00
> 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 03 80
>
> 03:00.0 Class 0800: 8086:1161 (rev 01) (prog-if 20)
> Subsystem: 8086:1161
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
>SERR- FastB2B-
> Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
><MAbort- >SERR- <PERR-
> Latency: 0
> Region 0: Memory at fd8ff000 (32-bit, non-prefetchable)
> 00: 86 80 61 11 06 00 00 00 01 20 00 08 00 00 80 00
> 10: 00 f0 8f fd 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 86 80 61 11
> 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
> 04:00.0 Class 0300: 102b:0525 (rev 05)
> Subsystem: 102b:2179
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
>SERR- FastB2B-
> Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
><MAbort- >SERR- <PERR-
> Latency: 64 (4000ns min, 8000ns max), cache line size 08
> Interrupt: pin A routed to IRQ 16
> Region 0: Memory at f2000000 (32-bit, prefetchable)
> Region 1: Memory at feafc000 (32-bit, non-prefetchable)
> Region 2: Memory at fe000000 (32-bit, non-prefetchable)
> Expansion ROM at feae0000 [disabled]
> Capabilities: [dc] Power Management version 2
> Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
>PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [f0] AGP version 2.0
> Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2
> Command: RQ=31 SBA+ AGP+ 64bit- FW- Rate=x1
> 00: 2b 10 25 05 07 00 90 02 05 00 00 03 08 40 00 00
> 10: 08 00 00 f2 00 c0 af fe 00 00 00 fe 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 2b 10 79 21
> 30: 00 00 ae fe dc 00 00 00 00 00 00 00 0b 01 10 20
>
> -
> Linux SMP list: FIRST see FAQ at http://www.irisa.fr/prive/dmentre/smp-howto/
> To Unsubscribe: send "unsubscribe linux-smp" to [EMAIL PROTECTED]
>
--
Christopher Mauritz
[EMAIL PROTECTED]
-
Linux SMP list: FIRST see FAQ at http://www.irisa.fr/prive/dmentre/smp-howto/
To Unsubscribe: send "unsubscribe linux-smp" to [EMAIL PROTECTED]
