Linux version 2.2.17pre15 ([EMAIL PROTECTED]) (gcc version egcs-2.91.66
19990314/Linux (egcs-1.1.2 release)) #1 SMP Sat Aug 5 19:47:14 CEST 2000
Intel MultiProcessor Specification v1.4
Virtual Wire compatibility mode.
OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000
Processor #1 Pentium(tm) Pro APIC version 17
Processor #0 Pentium(tm) Pro APIC version 17
I/O APIC #2 Version 17 at 0xFEC00000.
Processors: 2
mapped APIC to ffffe000 (fee00000)
mapped IOAPIC to ffffd000 (fec00000)
Detected 602566 kHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 1202.59 BogoMIPS
Memory: 64136k/66496k available (972k kernel code, 432k reserved, 904k data, 52k init)
Dentry hash table entries: 16384 (order 5, 128k)
Buffer cache hash table entries: 65536 (order 6, 256k)
Page cache hash table entries: 16384 (order 4, 64k)
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.35a (19990819) Richard Gooch ([EMAIL PROTECTED])
per-CPU timeslice cutoff: 50.00 usecs.
CPU1: Intel Pentium III (Coppermine) stepping 01
calibrating APIC timer ...
..... CPU clock speed is 602.5606 MHz.
..... system bus clock speed is 133.9022 MHz.
Booting processor 0 eip 2000
Calibrating delay loop... 1202.59 BogoMIPS
OK.
CPU0: Intel Pentium III (Coppermine) stepping 01
Total of 2 processors activated (2405.17 BogoMIPS).
enabling symmetric IO mode... ...done.
ENABLING IO-APIC IRQs
init IO_APIC IRQs
IO-APIC (apicid-pin) 2-0, 2-5, 2-10, 2-11, 2-13, 2-18, 2-20, 2-21, 2-22, 2-23 not
connected.
number of MP IRQ sources: 18.
number of IO-APIC #2 registers: 24.
testing the IO APIC.......................
IO APIC #2......
.... register #00: 02000000
....... : physical APIC id: 02
.... register #01: 00170020
....... : max redirection entries: 0017
....... : IO APIC version: 0020
WARNING: unexpected IO-APIC, please mail
to [EMAIL PROTECTED]
.... register #02: 00000000
....... : arbitration: 00
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 000 00 0 0 0 0 0 1 1 59
02 0FF 0F 0 0 0 0 0 1 1 51
03 000 00 0 0 0 0 0 1 1 61
04 000 00 0 0 0 0 0 1 1 69
05 000 00 1 0 0 0 0 0 0 00
06 000 00 0 0 0 0 0 1 1 71
07 000 00 0 0 0 0 0 1 1 79
08 000 00 0 0 0 0 0 1 1 81
09 000 00 0 0 0 0 0 1 1 89
0a 000 00 1 0 0 0 0 0 0 00
0b 000 00 1 0 0 0 0 0 0 00
0c 000 00 0 0 0 0 0 1 1 91
0d 000 00 1 0 0 0 0 0 0 00
0e 000 00 0 0 0 0 0 1 1 99
0f 000 00 0 0 0 0 0 1 1 A1
10 0FF 0F 1 1 0 1 0 1 1 A9
11 0FF 0F 1 1 0 1 0 1 1 B1
12 000 00 1 0 0 0 0 0 0 00
13 0FF 0F 1 1 0 1 0 1 1 B9
14 000 00 1 0 0 0 0 0 0 00
15 000 00 1 0 0 0 0 0 0 00
16 000 00 1 0 0 0 0 0 0 00
17 000 00 1 0 0 0 0 0 0 00
IRQ to pin mappings:
IRQ0 -> 2
IRQ1 -> 1
IRQ3 -> 3
IRQ4 -> 4
IRQ6 -> 6
IRQ7 -> 7
IRQ8 -> 8
IRQ9 -> 9
IRQ12 -> 12
IRQ14 -> 14
IRQ15 -> 15
IRQ16 -> 16
IRQ17 -> 17
IRQ19 -> 19
.................................... done.
checking TSC synchronization across CPUs: passed.
PCI: PCI BIOS revision 2.10 entry at 0xf0770
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI->APIC IRQ transform: (B0,I31,P3) -> 19
PCI->APIC IRQ transform: (B0,I31,P1) -> 17
PCI->APIC IRQ transform: (B1,I0,P0) -> 16
PCI->APIC IRQ transform: (B2,I8,P0) -> 16
PCI->APIC IRQ transform: (B2,I9,P0) -> 17
PCI->APIC IRQ transform: (B2,I11,P0) -> 19
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: G4KLX/GW4PTS AX.25 for Linux. Version 0.37 for Linux NET4.0
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
TCP: Hash tables configured (ehash 65536 bhash 65536)
Starting kswapd v 1.5
Detected PS/2 Mouse Port.
Serial driver version 4.27 with no serial options enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
pty: 256 Unix98 ptys configured
Real Time Clock Driver v1.09
PCI_IDE: unknown IDE controller on PCI bus 00 device f9, VID=8086, DID=2411
PCI_IDE: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x9800-0x9807, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0x9808-0x980f, BIOS settings: hdc:DMA, hdd:pio
hda: WDC AC31600H, ATA DISK drive
hdc: ASUS CD-S500/A, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: Disabling (U)DMA for WDC AC31600H
hda: DMA disabled
hda: WDC AC31600H, 1549MB w/128kB Cache, CHS=3148/16/63
hdc: ATAPI 50X CD-ROM drive, 128kB Cache
Uniform CD-ROM driver Revision: 3.11
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
AX.25 ethernet driver version 0.01
3c59x.c:v0.99H 24Jun00 Donald Becker and others
http://www.scyld.com/network/vortex.html
eth0: 3Com 3c905B Cyclone 100baseTx at 0xd800, 00:10:5a:17:25:83, IRQ 16
8K byte-wide RAM 5:3 Rx:Tx split, autoselect/Autonegotiate interface.
MII transceiver found at address 24, status 786d.
MII transceiver found at address 0, status 786d.
Enabling bus-master transmits and whole-frame receives.
Partition check:
hda: [PTBL] [787/64/63] hda1 hda2 hda3
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 52k freed
Adding Swap: 14108k swap-space (priority -1)
-
Linux SMP list: FIRST see FAQ at http://www.irisa.fr/prive/dmentre/smp-howto/
To Unsubscribe: send "unsubscribe linux-smp" to [EMAIL PROTECTED]
