On Thu, Mar 3, 2016 at 7:58 AM, Alexey Brodkin <alexey.brod...@synopsys.com> wrote: > Hi Rob, > > On Tue, 2016-02-23 at 14:38 -0600, Rob Herring wrote: >> On Fri, Feb 19, 2016 at 04:03:52PM +0300, Alexey Brodkin wrote: >> > >> > This add DT bindings documentation for ARC PGU display controller. >> > >> > Signed-off-by: Alexey Brodkin <abrod...@synopsys.com> >> > Cc: Rob Herring <robh...@kernel.org> >> > Cc: Pawel Moll <pawel.m...@arm.com> >> > Cc: Mark Rutland <mark.rutl...@arm.com> >> > Cc: Ian Campbell <ijc+devicet...@hellion.org.uk> >> > Cc: Kumar Gala <ga...@codeaurora.org> >> > Cc: devicet...@vger.kernel.org >> > Cc: linux-snps-arc@lists.infradead.org >> > --- >> > .../devicetree/bindings/display/snps,arcpgu.txt | 74 >> > ++++++++++++++++++++++ >> > 1 file changed, 74 insertions(+) >> > create mode 100644 >> > Documentation/devicetree/bindings/display/snps,arcpgu.txt >> > >> > diff --git a/Documentation/devicetree/bindings/display/snps,arcpgu.txt >> > b/Documentation/devicetree/bindings/display/snps,arcpgu.txt >> > new file mode 100644 >> > index 0000000..c8382fb >> > --- /dev/null >> > +++ b/Documentation/devicetree/bindings/display/snps,arcpgu.txt >> > @@ -0,0 +1,74 @@ >> > +ARC PGU >> > + >> > +This is a display controller found on several development boards produced >> > +by Synopsys. The ARC PGU is an RGB streamer that reads the data from a >> > +framebuffer and sends it to a single digital encoder (usually HDMI). >> > + >> > +Required properties: >> > + - compatible: "snps,arcpgu" >> Seems like this should be more specific. Is there some sort or >> versioning with ARC blocks? > > Well as of today there's only one and only version of PGU. > So is there a real need for "snps,arcpgu-1.0"? > >> > >> > + - reg: Physical base address and length of the controller's registers. >> > + - clocks: A list of phandle + clock-specifier pairs, one for each >> > + entry in 'clock-names'. >> > + - clock-names: A list of clock names. For ARC PGU it should contain: >> > + - "pxlclk" for the clock feeding the output PLL of the controller. >> > + - encoder-slave: Phandle of encoder chip. >> This is unnecessary with the OF graph. > > Do you mean I may drop "encoder-slave" from bindings description?
Yes, you should drop it. > I actually thought about that because in case of simulation platform where > this device is also used there's no encoder as well as no connector - we're > dealing with memory area which is read by host and then displayed on host's > display. > _______________________________________________ linux-snps-arc mailing list linux-snps-arc@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-snps-arc
