Convert the Synopsys DesignWare APB interrupt controller (dw_apb_ictl) binding to DT schema format using json-schema.
Signed-off-by: Zhen Lei <thunder.leiz...@huawei.com> --- .../interrupt-controller/snps,dw-apb-ictl.txt | 43 ------------- .../interrupt-controller/snps,dw-apb-ictl.yaml | 75 ++++++++++++++++++++++ 2 files changed, 75 insertions(+), 43 deletions(-) delete mode 100644 Documentation/devicetree/bindings/interrupt-controller/snps,dw-apb-ictl.txt create mode 100644 Documentation/devicetree/bindings/interrupt-controller/snps,dw-apb-ictl.yaml diff --git a/Documentation/devicetree/bindings/interrupt-controller/snps,dw-apb-ictl.txt b/Documentation/devicetree/bindings/interrupt-controller/snps,dw-apb-ictl.txt deleted file mode 100644 index 2db59df9408f4c6..000000000000000 --- a/Documentation/devicetree/bindings/interrupt-controller/snps,dw-apb-ictl.txt +++ /dev/null @@ -1,43 +0,0 @@ -Synopsys DesignWare APB interrupt controller (dw_apb_ictl) - -Synopsys DesignWare provides interrupt controller IP for APB known as -dw_apb_ictl. The IP is used as secondary interrupt controller in some SoCs with -APB bus, e.g. Marvell Armada 1500. It can also be used as primary interrupt -controller in some SoCs, e.g. Hisilicon SD5203. - -Required properties: -- compatible: shall be "snps,dw-apb-ictl" -- reg: physical base address of the controller and length of memory mapped - region starting with ENABLE_LOW register -- interrupt-controller: identifies the node as an interrupt controller -- #interrupt-cells: number of cells to encode an interrupt-specifier, shall be 1 - -Additional required property when it's used as secondary interrupt controller: -- interrupts: interrupt reference to primary interrupt controller - -The interrupt sources map to the corresponding bits in the interrupt -registers, i.e. -- 0 maps to bit 0 of low interrupts, -- 1 maps to bit 1 of low interrupts, -- 32 maps to bit 0 of high interrupts, -- 33 maps to bit 1 of high interrupts, -- (optional) fast interrupts start at 64. - -Example: - /* dw_apb_ictl is used as secondary interrupt controller */ - aic: interrupt-controller@3000 { - compatible = "snps,dw-apb-ictl"; - reg = <0x3000 0xc00>; - interrupt-controller; - #interrupt-cells = <1>; - interrupt-parent = <&gic>; - interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; - }; - - /* dw_apb_ictl is used as primary interrupt controller */ - vic: interrupt-controller@10130000 { - compatible = "snps,dw-apb-ictl"; - reg = <0x10130000 0x1000>; - interrupt-controller; - #interrupt-cells = <1>; - }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/snps,dw-apb-ictl.yaml b/Documentation/devicetree/bindings/interrupt-controller/snps,dw-apb-ictl.yaml new file mode 100644 index 000000000000000..70c12979c843bf0 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/snps,dw-apb-ictl.yaml @@ -0,0 +1,75 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interrupt-controller/snps,dw-apb-ictl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Synopsys DesignWare APB interrupt controller (dw_apb_ictl) + +maintainers: + - Marc Zyngier <marc.zyng...@arm.com> + +description: + Synopsys DesignWare provides interrupt controller IP for APB known as + dw_apb_ictl. The IP is used as secondary interrupt controller in some SoCs + with APB bus, e.g. Marvell Armada 1500. It can also be used as primary + interrupt controller in some SoCs, e.g. Hisilicon SD5203. + +allOf: + - $ref: /schemas/interrupt-controller.yaml# + +properties: + compatible: + const: snps,dw-apb-ictl + + interrupt-controller: true + + reg: + description: + Physical base address of the controller and length of memory mapped + region starting with ENABLE_LOW register. + + interrupts: + description: + Interrupt reference to primary interrupt controller. + + The interrupt sources map to the corresponding bits in the interrupt + registers, i.e. + - 0 maps to bit 0 of low interrupts, + - 1 maps to bit 1 of low interrupts, + - 32 maps to bit 0 of high interrupts, + - 33 maps to bit 1 of high interrupts, + - (optional) fast interrupts start at 64. + minItems: 1 + maxItems: 65 + + "#interrupt-cells": + description: + Number of cells to encode an interrupt-specifier. + const: 1 + +required: + - compatible + - reg + - interrupt-controller + - '#interrupt-cells' + +examples: + - | + /* dw_apb_ictl is used as secondary interrupt controller */ + aic: interrupt-controller@3000 { + compatible = "snps,dw-apb-ictl"; + reg = <0x3000 0xc00>; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&gic>; + interrupts = <0 3 4>; + }; + + /* dw_apb_ictl is used as primary interrupt controller */ + vic: interrupt-controller@10130000 { + compatible = "snps,dw-apb-ictl"; + reg = <0x10130000 0x1000>; + interrupt-controller; + #interrupt-cells = <1>; + }; -- 1.8.3 _______________________________________________ linux-snps-arc mailing list linux-snps-arc@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-snps-arc