Nothing worked! :-( I changed my 16-bit DMA to 6. Nothing. I changed
post-install of adlib module. Nothing.
Here goes my isapnp.conf
# $Id: pnpdump.c,v 1.1.1.2 1998/01/07 05:17:47 fred Exp $
# This is free software, see the sources for details.
# This software has NO WARRANTY, use at your OWN RISK
#
# For details of this file format, see isapnp.conf(5)
#
# For latest information on isapnp and pnpdump see:
# http://www.roestock.demon.co.uk/isapnptools/
#
# Compiler flags: -DREALTIME -DNEEDSETSCHEDULER -DNEEDNANOSLEEP
#
# Trying port address 0203
# Board 1 has serial identifier 0f 00 00 4d 75 44 00 8c 0e
# (DEBUG)
(READPORT 0x0203)
(ISOLATE)
(IDENTIFY *)
(VERIFYLD N)
# Card 1: (serial identifier 0f 00 00 4d 75 44 00 8c 0e)
# Vendor Id CTL0044, Serial Number 19829, checksum 0x0F.
# Version 1.0, Vendor version 1.0
# ANSI string -->Creative SB32 PnP<--
#
# Logical device id CTL0031
#
# Edit the entries below to uncomment out the configuration required.
# Note that only the first value of any range is given, this may be changed if required
# Don't forget to uncomment the activate (ACT Y) when happy
(CONFIGURE CTL0044/19829 (LD 0
# ANSI string -->Audio<--
(INT 0 (IRQ 5 (MODE +E)))
(DMA 0 (CHANNEL 1))
(DMA 1 (CHANNEL 6))
(IO 0 (BASE 0x0220))
(IO 1 (BASE 0x0330))
(IO 2 (BASE 0x0388))
(ACT Y)
))
#
# Logical device id CTL2011
#
# Edit the entries below to uncomment out the configuration required.
# Compatible device id PNP0600
# ANSI string -->IDE<--
(CONFIGURE CTL0044/19829 (LD 1
# ANSI string -->IDE<--
(INT 0 (IRQ 10 (MODE +E)))
(IO 0 (BASE 0x0168))
(IO 1 (BASE 0x036e))
(ACT Y)
))
#
# Logical device id CTL0021
#
# Edit the entries below to uncomment out the configuration required.
# Note that only the first value of any range is given, this may be changed if required
# Don't forget to uncomment the activate (ACT Y) when happy
(CONFIGURE CTL0044/19829 (LD 2
# ANSI string -->WaveTable<--
(IO 0 (BASE 0x0620))
(IO 1 (BASE 0x0A20))
(IO 2 (BASE 0x0E20))
(ACT Y)
))
#
# Logical device id CTL7001
#
# Edit the entries below to uncomment out the configuration required.
# Note that only the first value of any range is given, this may be changed if required
# Don't forget to uncomment the activate (ACT Y) when happy
(CONFIGURE CTL0044/19829 (LD 3
# Compatible device id PNPb02f
# ANSI string -->Game<--
(IO 0 (BASE 0x0200))
(ACT Y)
))
#
# Logical device id CTL0051
#
# Edit the entries below to uncomment out the configuration required.
# Note that only the first value of any range is given, this may be changed if required
# Don't forget to uncomment the activate (ACT Y) when happy
(CONFIGURE CTL0044/19829 (LD 4
# ANSI string -->StereoEnhance<--
(IO 0 (BASE 0x0100))
(ACT Y)
))
# End tag... Checksum 0x00 (OK)
# Returns all cards to the "Wait for Key" state
(WAITFORKEY)
-------- conf.modules --------
### This file is automatically generated by update-modules
#
# Please do not edit this file directly. If you want to change or add
# anything please take a look at the files in /etc/modutils and read
# the manpage for update-modules.
#
alias block-major-7 loop
# Uncomment the network protocols you don't want loaded:
# alias net-pf-2 off # IPv4
alias net-pf-3 off
alias net-pf-4 off # IPX
alias net-pf-5 off # DDP / appletalk
alias net-pf-10 off # IPv6
# Other aliases:
alias net-pf-17 af_packet # packet mode (tcpdump, etc.)
alias netalias-2 ip_alias
alias char-major-4 serial
alias char-major-10-130 softdog
alias iso9660 isofs
alias ppp-compress-21 bsd_comp
alias ppp-compress-24 ppp_deflate
alias binfmt-0064 binfmt_aout
alias binfmt--310 binfmt_java
# If you use the IDE tape driver as a module, uncomment the next two lines:
# alias block-major-3 ide-probe
# alias char-major-37 ide-tape
#alias <whatever you don't have that kerneld complains about> off
path[boot]=/lib/modules
# State module paths in order of importance
path[fs]=/lib/modules/`uname -r`
path[net]=/lib/modules/`uname -r`
path[scsi]=/lib/modules/`uname -r`
path[block]=/lib/modules/`uname -r`
path[cdrom]=/lib/modules/`uname -r`
path[ipv4]=/lib/modules/`uname -r`
path[ipv6]=/lib/modules/`uname -r`
path[misc]=/lib/modules/`uname -r`
path[video]=/lib/modules/`uname -r`
path[sound]=/lib/modules/`uname -r`
path[fc4]=/lib/modules/`uname -r`
path[fs]=/lib/modules/`kernelversion`
path[net]=/lib/modules/`kernelversion`
path[scsi]=/lib/modules/`kernelversion`
path[block]=/lib/modules/`kernelversion`
path[cdrom]=/lib/modules/`kernelversion`
path[ipv4]=/lib/modules/`kernelversion`
path[ipv6]=/lib/modules/`kernelversion`
path[misc]=/lib/modules/`kernelversion`
path[video]=/lib/modules/`kernelversion`
path[sound]=/lib/modules/`kernelversion`
path[fc4]=/lib/modules/`kernelversion`
path[fs]=/lib/modules
path[net]=/lib/modules
path[scsi]=/lib/modules
path[block]=/lib/modules
path[cdrom]=/lib/modules
path[ipv4]=/lib/modules
path[ipv6]=/lib/modules
path[misc]=/lib/modules
path[video]=/lib/modules
path[sound]=/lib/modules
path[fc4]=/lib/modules
alias parport_lowlevel parport_pc
alias char-major-14 sb
pre-install sb /sbin/modprobe "-k" "adlib_card"
options sb io=0x220 irq=5 dma=1 dma16=6 mpu_io=0x330
options adlib_card io=0x388 # FM synthesizer
#options sound dmabuf=1
Hoping we have success in fixing that,
Rodrigo Castro <[EMAIL PROTECTED]>
Computer Science undergraduate student - University of Sao Paulo
Rudeness is a weak man's imitation of strength.
