I have an AOpen FX-3D sound board which I run in Sound Blaster emulation
mode and it was working fine under Linux 2.0.34. I upgraded Linux to
2.0.36 and I can't get the sound to work.
Trying to initializing the sound board gives me:
sb: Interrupt test on IRQ7 failed - device disabled
I've tried fooling around with isapnptools but I don't get anywhere.
cat'ting /snd/sndstat gives:
Sound Driver:3.5.4-960630 (Thu Mar 18 21:23:59 EST 1999 root,
Linux melake 2.0.36 #2 Tue Mar 16 17:51:55 EST 1999 i686 unknown)
Kernel: Linux melake 2.0.36 #6 Thu Mar 18 21:35:19 EST 1999 i686
Config options: 880002
Installed drivers:
Type 1: OPL-2/OPL-3 FM
Type 2: Sound Blaster
Card config:
Sound Blaster at 0x220 irq 7 drq 1,5
(OPL-2/OPL-3 FM at 0x388 drq 0)
Audio devices:
Synth devices:
Midi devices: NOT ENABLED IN CONFIG
Timers:
0: System clock
Mixers:
I had compiled 2.0.34 as i386. I compiled 2.0.36 as i686. Could that be
making the difference?
Does anyone have any suggestions short of going back to 2.0.34?
Marshall Lake - [EMAIL PROTECTED] - http://melake.erols.com
http://melake.erols.com/~the-beach http://melake.erols.com/~genealogy
